• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.7
• /
• pp.557-563
• /
• 2001

Small capacity gas absorption systems for cooling and heating have been favorably considered to reduce the seasonal imbalance of electrical loads and LNG consumption recently. A multifunctional plate-fin heat exchanger was adopted as an absorber and the performance was tested and analyzed to reduce the size and weight of the absorption heat pump. The test was performed using breadboard type ammonia absorption machine. The performance was compared with the plate type absorber and there was little difference in heat and mass transfer characteristics. The heat and mass transfer performance was a function of poor solution and vapor flow rates and the mass transfer was dependent on vapor flow rate more than heat transfer.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1548-1553
• /
• 2003

An experimental study of the absorption process of water vapor into a lithium bromide solution was performed. For the purpose of development of high performance absorption chiller/hater utilizing lithium bromide solution as working fluid, it is the most effective to improve the performance of absorber with the largest heat transfer area of the four heat exchangers. The experimental apparatus was composed of a plate type absorber which can increase the heat exchange area per unit volume to investigate more detail characteristics instead of the conventional type, horizontal tube bundle type. The size of plate absorbers were made for $0.4m{\times}0.6m$ and the design object of a refrigeration capacity was lRT. In this experiment, three kind plate absorbers which were flat plate, dimple plate and groove plate were used. The results were less than the design object values, that is, the refrigeration capacity was about $0.3{\sim}0.4RT$ and the overall heat transfer coefficient was $500{\sim}600kcal/m^2h^{\circ}C$ at the standard conditions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.4
• /
• pp.593-602
• /
• 2004

This paper is a study on the model of simultaneous heat and mass transfer process in the absorption of refrigerant vapor into a lithium bromide solution of water-cooled vertical plate absorber. The model can predict temperature and concentration profiles as well as the effect of Reynolds number on them. Also. the variations of the absorption heat and mass fluxes. and the heat and mass transfer coefficients have been investigated. The numerical result shows that the interface temperature and concentration decrease as film Reynolds number does. The absorption heat and mass fluxes, and the heat and mass transfer coefficients get their maximum values adjacent to the inlet solution. Analyses on a constant wall temperature condition have been also carried out to exam the reliability of the present numerical method by comparing to previous investigations.

• Proceedings of the SAREK Conference
• /
• 2003.07a
• /
• pp.133-133
• /
• 2003

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.82-82
• /
• 2023

홍수기 하천에서 유량측정은 예산, 인력, 안전 및 측정 시 편의성 등의 이유로 측정에 제한이 많다. 특히, 태풍 등으로 인한 호우사상 발생 시 위와 같은 문제로 홍수량 측정에 어려움이 따른다. 이러한 문제점을 개선하기 위해 Lee et al.(2021)은 드론과 전자파표면유속계의 기능을 융합한 DSVM(Dron and Surface Veloctity Meter using doppler radar) 측정방법을 개발하였다. 전자파표면유속계 측정의 제한 요소인 진동을 감소시키기 위해 댐퍼플레이트를 개발하였고 금강의 지류인 봉황천에 현장 적용을 통해 DSVM 측정방법의 실용성을 확인하였다. 기존 연구에서 DSVM 방법은 드론의 각 측선 이동을 위한 조종과 전자파표면유속계 측정의 제어를 측정자가 수행하였는데 본 연구에서는 통합 드론측정시스템(IDMS, Integrated Drone Measurement System) 개발을 통해 측정자의 조종 의존도를 줄임과 동시에 안전하고 정확한 유량측정을 위해 노력하였다. 기존 댐퍼플레이트의 상하 진동 흡수 기능뿐만 아니라 전자파표면유속계의 흔들림 현상 등 자세 제어 기능을 보완하기 3축 모터를 적용한 방수짐벌을 개발하여 측정 정확도를 향상시켰다. 미션컴퓨터 개발로 측정지점의 측정 임무정보를 DB화하여 각 측선별 헤딩, 고도, 이동 등 자동항법 기능과 기체의 안정화 이후 전자파표면유속계를 자동으로 제어하여 측정을 실시하는 기능을 구현하였다. 또한 통합 GCS(Ground Control System)를 통해 비행 및 측정에 대한 모든 정보를 확인하고 컨트롤 할 수 있게 하였다. 2022년 금산군(제원대교), 무주군(취수장), 경주시(서천교) 지점에서 홍수기 유량측정에 도입하여 중간단면적법, 지표유속법을 적용하여 통합드론측정시스템의 실용성을 검증 완료하였다. 2023년 현장에 18대의 통합 드론측정시스템을 도입하여 홍수기 유량측정에 활용할 계획이다.

• The korean journal of orthodontics
• /
• v.38 no.5
• /
• pp.304-313
• /
• 2008

Objective: The purpose of this study was to evaluate the stress distribution in bone and displacement distribution of the miniscrew according to the length and number of the miniscrews used for the fixation of miniplate, and the direction of orthodontic force. Methods: Four types of finite element models were designed to show various lengths (6 mm, 4 mm) and number (3, 2) of 2 mm diameter miniscrew used for the fixation of six holes for a curvilinear miniplate. A traction force of 4 N was applied at $0^{\circ}$, $30^{\circ}$, $60^{\circ}$ and $90^{\circ}$ to an imaginary axis connecting the two most distal unfixed holes of the miniplate. Results: The smaller the number of the miniscrew and the shorter the length of the miniscrew, the more the maximum von Mises stress in the bone and maximum displacement of the miniscrew increased. Most von Mises stress in the bone was absorbed in the cortical portion rather than in the cancellous portion. The more the angle of the applied force to the imaginary axis increased, the more the maximum von Mises stress in the bone and maximum displacement of the miniscrew increased. The maximum von Mises stress in the bone and maximum displacement of the miniscrew were measured around the most distal screw-fixed area. Condusions: The results suggest that the miniplate system should be positioned in the rigid cortical bone with 3 miniscrews of 2 mm diameter and 6 mm length, and its imaginary axis placed as parallel as possible to the direction of orthodontic force to obtain good primary stability.