• Journal of the Korean Solar Energy Society
• /
• v.24 no.4
• /
• pp.11-18
• /
• 2004

A solar concentrator, named KIERDISH II, was built at KIER in order to investigate the feasibility of high temperature solar energy application system. The constructed concentrator is a dish type solar concentrator with a focal length of 4.68m and a diameter of 7.9m. To successfully operate KIERDISH II, optimal design of the absorber is very important and flux density distribution has to be known. The focal flux density distribution on the receiver was measured. We have observed the shape and size of flux images and evaluated percent power within radius. Flux density distribution is usually measured by a CCD(charge coupled device) camera and a radiometer. In this paper we present a flux mapping method to estimate the characteristic features of the flux density distribution in the focal region of solar concentrator. The minimum radius of receiver is found to be 0.15m and approximately 90% of the incident radiation is intercepted by receiver aperture.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1927-1929
• /
• 2004

현재 널리 쓰이는 고밀도 플라즈마 장치의 식각 시뮬레이션은 식각 패턴으로는 level set method이며 바이어스가 인가된 sheath model로는 Riley sheath model 이 보편적으로 받아들여지고 있다. 이러한 식각 시뮬레이션은 RF(Radio Frequency) sheath로부터 가속된 이온이 단위 입체각당 특정 지점에 이온 플럭스 분포함수, 이온 에너지 분포함수와, 중성종의 수송모델로 etch rate을 결정하는 과정과 level set method을 이용하여 식각 형태를 계산하는 과정으로 구성되어있다. 본 연구는 식각 형태 계산 이전의 단계로서 $Ar^+,\;Cl_2{^+},\;Cl^+$이온의 유동속도와 밀도를 장치의 radial방향으로 불균일하게 가정하였고, 가정한 값으로 이온 플럭스와 에너지 플럭스에 대한 영향을 알아보았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.422-426
• /
• 2005

This experimental study represents the results of an analysis on the characteristics of flux density distribution in the focal region of solar concentrator. The characteristics of flux density distributions are investigated to optimally design and position a cavity receiver. This was deemed very useful to find and correct various errors associated with a dish concentrator. We estimated the flux density distribution on the target placed along with focal lengths from the dish vertex to experimentally determine the focal length. It is observed that the actual focal point exists when the focal length is 2.17m. The total integrated power and percent power was 2467W and $85.8\%$, respectively, in the case of small dish, and also 2095W and $79\%$, respectively, in the case of KIERDISH II. As a result of the percent power within radius, approximately $90\%$ of the incident radiation is intercepted by about 0.06 m radius. The minimum radius of receiver in KIERDISH II is found to be 0.15m and approximately $90\%$ of the incident radiation is intercepted by receiver aperture.

• Journal of the Korean Magnetics Society
• /
• v.19 no.2
• /
• pp.67-73
• /
• 2009

The changes of geomagnetic flux density distribution on the ground surface by underground empty spaces had been investigated through the variations of the soil density and measuring heights. The geomagnetic flux density distributions were monitored for the surfaces of different density, sink-hole and tunnel by fluxgate-type magnetometer. The underground empty space and low soil density decreased the geomagnetic flux densities, which were decreased from the boundary of raw and low-density (empty) grounds, and showed the lowest value at the center of low-density (empty) ground. The decreases of geomagnetic flux density by underground empty spaces could be found at the surface with the tunnel located at 80 m underground. And, the underground defects of empty spaces, low density zone, fracture zone and sink holes could be monitored by the phenomena of this decreasing flux density.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.04a
• /
• pp.8-8
• /
• 1999

2-유체 인젝터의 분무연소에 대한 통찰 및 구조에 대한 이해와 연료-공기 혼합과 연소반응의 물리적 이해에 필요한 수치적 모델의 개발 및 검증을 위해서는 2유체 시스템에서 액체 및 기체 각각의 기본적 특성인 액적크기, 액적속도, 액적의 질량플럭스(flux), 가스상의 속도측정 등이 필요하다. 특히, 액체분무에서는 액적의 크기를 예측하는 것이 매우 중요한 과제이며, 액적의 크기에 영향을 주는 인자들로는 노즐의 형태, 분사액체의 물성치(점도, 표면장력, 밀도), 주위기체의 조건(온도, 압력, 응축과 증발현상), 분사압력 등이 있다. 그러나, 실제 분무액적의 크기는 분포를 가지므로 같은 SMD를 가지더라도 그 분포의 정도는 크게 다를 수 있어 결과적으로 분무액적의 크기를 평균값만으로 표현하는 것은 불충분할 뿐만 아니라 그 적용에도 한계를 가지게 된다. 따라서 분무액적의 평균크기와 함께 그 분포의 정도 등을 함께 나타내려는 시도가 많은 과학자들에 의하여 연구되었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1B
• /
• pp.29-36
• /
• 2011

Evapotranspiration (ET) from the various surfaces needs to be understood because it is a crucial hydrological factor to grasp interaction between the land surface and the atmosphere. A traditional way of estimating it, which is calculating it empirically using lysimeter and pan evaporation observations, has a limitation that the measurements represent only point values. However, these measurements cannot describe ET because it is easily affected by outer circumstances. Thus, remote sensing technology was applied to estimate spatial distribution of ET. In this study, we estimated major components of energy balance method (i.e. net radiation flux, soil heat flux, sensible heat flux, and latent heat flux) and ET as a map using Mapping Evapo-Transpiration with Internalized Calibration (METRIC) satellite-based image processing model. This model was run using Landsat imagery of Gyeongan watershed in Korea on Feb 1, 2003 and Sep 13, 2006. Basic statistical analyses were also conducted. The estimated mean daily ETs had respectively 22% and 11% of errors with pan evaporation data acquired from the Suwon Weather Station. This result represented similar distribution compared with previous studies and confirmed that the METRIC algorithm had high reliability in the watershed. In addition, ET distribution of each land use type was separately examined. As a result, it was identified that vegetation density had dominant impacts on distribution of ET. Seasonally, ET in a growing season represented significantly higher than in a dormant season due to more active transpiration. The ET maps will be useful to analyze how ET behaves along with the circumstantial conditions; land cover classification, vegetation density, elevation, topography.

• Journal of the Korean Magnetics Society
• /
• v.20 no.2
• /
• pp.52-60
• /
• 2010

The changes of magnetic flux density distribution and the degree of magnetic anomaly on the ground surface by underground fracture zones and empty spaces had been investigated through the variations of the measuring heights. The magnetic flux density distributions were monitored for the ground surfaces of fracture zones, empty spaces and tunnels by fluxgate-type magnetometer. The fracture zones showed the magnetic anomaly with (+) and (-) peak-pairs in the magnetic flux distribution measured at 0.15 m height from the ground surface, and this anomaly disappeared at the height of 1.15 m. The underground empty spaces and tunnels showed the decrease of magnetic flux densities, where the degree of this density decrease diminished with the increase of the underground depth. And, the existence and size of underground empty spaces, such as tunnels and sink holes, could be monitored by the phenomena of this decreasing flux density.

• Journal of the Korean Solar Energy Society
• /
• v.22 no.3
• /
• pp.31-37
• /
• 2002

This experimental study represents the results of an analysis on the characteristics of flux density distributions in the focal region of solar concentrator. The characteristics of flux density distributions are investigated to optimally design and position a cavity receiver. This deemed very useful to find and correct various errors associated with a dish concentrator. We estimated the flux density distribution on the target placed along with focal lengths from the dish vertex to experimentally determine the focal length. It is observed that the actual focal point exists when the focal length is 2.17 m. We also evaluated the position of flux centroid, and it was found that there were errors within 2 cm from the target center. The total integrated power of 2467 W was measured under focal flux distributions, which corresponds to the intercept rate of 85.8%. As a result of the percent power within radius, approximately 90% of the incident radiation is intercepted by about 0.06 m radius.

• Resources Recycling
• /
• v.9 no.1
• /
• pp.52-62
• /
• 2000

In order to maximize the recycling of converter slag to the more valuable fields, such as high quality aggregates for construction, cement industry and flux for ion making. It will be very important to control the compositions and properties of converter slag to suit the purpose of utilizastion. In this study, converter slag (STELCO, CANADA) was mixed with 5%~30% $SiO_2$and 7% carbon, and then reduced at $1650^{\circ}C$. After the reduction was completed, the reformed slags were cooled to room temperature in the furnace. All of the slags were then characterized using SEM-EDX, XRD and chemical analysis. Also the compressive strengths and densities of the reformed slags were measured to compare with natural aggregates. XRD analysis shows that th phases of reformed slags are changed from bredigite+merwinite mixed phases of 10% $SiO_2$added reduction to akermanite phases of 20% and 30% $SiO_2$ added reduction. But the SEM-EDX analysis revealed that the phase distribution of the reformed slags was changed very sensitively and complicately depends on the change of slag compositions. And also the properties of reformed slags are changed very much depend on the phase distribution. About one third of Cadmium and on fifth of Vanadium are remained in reduction reformed converter slag. Another heavy metal elements such as cobalt, zinc, lead are removed up to more than 90-95% of original slag. The compressive strength and density of 25% $SiO_2$ added and reformed slag is very near to natural granite. This is superior more than 10% to Thyssen's $SiO_2$ added and oxidized converter slag aggregates.