• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.38 no.3
• /
• pp.28-34
• /
• 2009

LNG플랜트용 열교환기를 설계하는데 필요한 극저온 열전달의 기본 이론과 열교환기의 기본설계 기술에 대하여 소개하고자 한다.

• Plant Journal
• /
• v.2 no.2
• /
• pp.22-32
• /
• 2006

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.447-450
• /
• 2002

본 논문에서는 통합 관리 시스템을 이용하여 현재 김해에 있는 플랜트의 공정상태를 모니터링하고, 퍼지와 신경망을 이용하여 플랜트로부터 얻을 수 있는 데이터를 모델링 함으로써 공정의 상태를 미리 예측이 가능하도록 구성하였다. 이러한 예측된 모델을 이용하여 제어 전략을 설계함으로써 최적화된 제어 파라미터를 찾을 수 있으며, 특히 비정상적으로 들어오는 데이터에 대해서는 플랜트의 공정상태를 진단할 수 있는 가능성을 보이고 있다. 또한 기존의 통합 관리 시스템을 관리자라면 누구나 장소에 구애받지 않고 플랜트의 공정상태를 모니터링 할 수 있도록 웹을 이용하여 개발함으로써 플랜트의 능률성과 효율성 향상 및 인건비 절약 등 플랜트의 효율을 개선시킬 수 있다 즉, 네트워크가 구축되어 있는 곳이면 어디서나 모니터링이 가능하도록 시스템을 설계하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.248-253
• /
• 2023

Most offshore platforms utilize chain mooring systems for position keeping. However, information regarding related design modification processes is scarce in literature. This study focuses on the floating liquefied natural gas (LNG) bunkering terminal (FLBT) as the target of shore platform and analyzes the corresponding initial mooring design and model tests via numerical simulations. Subsequently, based on the modified design conditions, a new mooring system design is proposed. Adjusting the main direction of the mooring line bundle according to the dominant environmental direction is found to significantly reduce the mooring design load. Even turret-moored offshore platforms are exposed to beam sea conditions, leading to high mooring tension due to motions in beam sea conditions. Collinear environmental conditions cannot be considered as design conditions. Mooring design loads occur under complex conditions of wind, waves, and currents in different environmental directions. Therefore, it is essential appropriately assign the roll damping coefficients during mooring analysis because the roll has a significant effect on mooring tension.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.10
• /
• pp.981-991
• /
• 1991

LQG/LTR method suggested to improve robustness of LQG have a theoritical constraint that it cannot apply to nonminimum phase plant(NMP). In this paper, we suggest a new LQG/LTR method for NMP which consist of three design steps. The first step is design a additional feed-foward compensator which approximate the given NMP plant to minimum phase(MP) plant and the next step is design a target loop transfer function for approximated MP plant satisfying the design specifications such as robust-performance and robust-stability. The last step is loop transfor recovery(LTR) that the open loop transfer function recovers the terget loop. It was shown by simulation example that the suggested method can solve the NMP constraint in designing LQG/LTR.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.4
• /
• pp.397-406
• /
• 2016

Diverse stakeholders engaged in design, construction, and operation and maintenance of offshore plants typically operate heterogeneous plant 3D CAD systems. Engineering, procurement, and construction (EPC) companies are required to submit plant design result to the owner in the form of a plant 3D CAD model, as specified in the contract. However, because of the limitations of data interface of plant 3D CAD systems, EPC companies frequently perform manual remodeling to fulfill the terms and conditions of the contract. Therefore, comparison should be performed between the source plant 3D CAD model and the remodeled plant 3D CAD model to prove the validity of the remodeled plant 3D CAD model. To automate the comparison process, we have developed a system for quantitatively assessing the similarity of the plant 3D CAD models. This paper presents the architecture and detailed functions of the system. In addition, experimental results using this system are explained.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.5
• /
• pp.146-154
• /
• 2011

Korean contractors have been maintained sustainable growth since entering into overseas construction market for the first time in 1960' s. In 2010, Korean contractors ordered 761 billion (USD) from overseas markets. Especially, billion (USD) were earned by Korean contractors in overseas plant construction market which account for more than 80% of the total amount by Korean contractors. Nevertheless, many Korean contractors are suffering from lack of technological competitiveness and construction management skills in the design phase compared with global leading contractors. These conditions have directly effect on the success of projects in terms of cost, duration, and quality. So, this study focused on identifying the risk factors and developing risk priority method for the design phase of LNG plant projects whose market is expanding. Research procedures were conducted by the following three steps. First, total 57 risk factors were identified in design phase through extensive literature reviews and experts survey. Second, the authors developed risk priority method which are more suitable for design phase of LNG plant projects by using three criteria, Probability(P), Impact(I), and Coordination Index(CI). Finally, the suitability of risk priority method and practical applicability were verified through expert survey and interview. Consequently, if korean contractors use the suggested risk factors and priority method based on their own know-how and experiences, then more reasonable and rational risk management will be conducted in the design phase of LNG plant projects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.19-27
• /
• 2020

On an offshore plant topside, various types of offshore facilities for processing energy resources, such as oil and gas, and equipment and outfitting for connecting these facilities are installed in a limited space. An offshore plant superstructure is composed of numerous supporting rack structures and reinforcements for securing and supporting offshore installations and the related equipment. This paper describes the development of design support software to support this superstructure design efficiently. The developed design support software, which was based on AVEVA Marine's PML(Programmable Macro Language), supports the parametric method for superstructure design. A method of batch 3D modeling from 2D drawings for supporting rack structure produced in the basic and detailed design was also developed using AutoLisp. In addition, through the application example of superstructure module design, the design support software introduced in this paper can be expected to reduce the design time by more than 90% compared to the use of only basic functions of AVEVA PDMS.

• Plant Journal
• /
• v.14 no.3
• /
• pp.4-15
• /
• 2018

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.41-43
• /
• 2021

미래 해상환경 변화 대응의 일환으로 항로표지의 스마트화를 위한 정보의 디지털화, 정보교환 체계의 표준화 등 항로표지기반의 정보 통합 DB구축을 통한 해양분야의 ICT 기술개발이 요구되고 있다. 또한, 항해안전을 위한 아날로그 정보 전달 기능의 항로표지 역할이 해양정보 수집 및 활용의 허브기능으로 확장이 되며 스마트항로표지의 도입 및 전환이 요구되고 있다. 이러한 해상교통흐름의 변화에 대응하기 위해 본 연구에서는 표준화, 디지털화된 항로표지정보의 통합 제공을 위한 디지털 항로표지 정보관리를 위한 정보협력시스템을 설계하였다.