• Transactions of the Korean hydrogen and new energy society
• /
• v.35 no.1
• /
• pp.105-113
• /
• 2024

The natural gas dehydration process plays a central role in liquefying LNG. This study proposes two natural gas dehydration process systems applicable to liquefied natural gas (LNG) liquefaction plants, and compares and analyzes energy optimization measures through simulation. The fuel gas from feed stream (FFF) case, which requires additional equipment for gas circulation, disadvantages are design capacity and increased energy. On the other hand, the end flash gas (EFG) case has advantages such as low initial investment costs and no need for compressors, but has downsides such as increased power energy and the use of gas with different components. According to the process simulation results, the required energy is 33.22 MW for the FFF case and 32.86 MW for the EFG case, confirming 1.1% energy savings per unit time in the EFG case. Therefore, in terms of design pressure, capacity, device configuration, and required energy, the EFG case is relatively advantageous. However, further research is needed on the impact of changes in the composition of regenerated gas on the liquefaction process and the fuel gas system.

• Plant Journal
• /
• v.12 no.2
• /
• pp.24-30
• /
• 2016

The membrane separation processes have received attention due to advantages such as compactness, modularity, ease of installation, flexibility of operation, lower capital cost and lower energy consumption. In this study, we evaluated accuracy of cross-flow, co-current and counter-current models. With the most accurate model, we identified the operating conditions of the two-stage membrane separation and examined the effects of permeance and selectivity of the membrane by simulation. Futhermore, power requirements and operating cost savings due to the introduction of the heat exchanger were investigated by applying heat exchanger network synthesis technique in the two-stage membrane separation using vapor sweep.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1993.11a
• /
• pp.57-63
• /
• 1993

냉열발전기술은 일본에서 많이 연구되어 다수의 상업 플랜트가 가동되고 있다. 일본에서는 천연가스 공급압력의 이원화(40 kgf/$\textrm{cm}^2$, 10 kgf/$\textrm{cm}^2$)로 직접 팽창방식을 적용할 수 있어 냉열발전의 경제성이 유리한 반면 국내에서는 비교적 높은 압력(70kgf/$\textrm{cm}^2$)의 단일 압력 공급체계에 적합한 냉열발전 시스템을 모색하여야 한다. 특히 발전용량 규모가 비교적 적은 냉열발전 시스템의 경제성 측면의 불리한 점을 고려할 때 적용 가능한 해당 발전공정들에 대해 전산모사의 방법을 이용하여 다양한 설계조건에서 최적의 조건들을 검토하여야 한다. 따라서 본 연구에서는 LNG의 저온 Exergy를 이용한 Rankine Cycle, LNG의 압력 Exergy를 이용한 부분팽창 Cycle 및 이 두 싸이클의 혼합 공정인 Linde 공정에 대해 현재 인수기지에서 운영되고있는 각종 설비들의 설계 데이타를 기준으로 상용모사기인 ASPEN PLUS를 이용, 국내 천연가스 공급 체계에 의거 각 공정별 최대 및 최적의 전력 발생 조건들을 검토하였다. 공정별 출력 및 엑서지 효율을 비교한 결과 약 3 ~ 6 Mw의 전력을 생산할 수 있음을 알 수 있었으며 최대 엑서지 효율은 37 %를 얻을 수 있었다. 또한 부분직접팽창방식의 최적시스템을 제시하였고 동일한 전열면적인 경우 부분직접팽창과 랭킨 싸이클의 성능은 비슷한 것으로 확인되었다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.6
• /
• pp.594-600
• /
• 2023

In this study, a process model and optimization design direction for a hydrogen production plant through ammonia decomposition are presented. If the reactor decomposition rate is designed to approach 100%, the amount of catalyst increases and the devices that make up the entire system also have a large design capacity. However, if the characteristics of the hydrogen regeneration process are reflected in the design of the reactor, it becomes possible to satisfy the total flow rate of fuel gas with the discharged tail gas flow rate. Analyzing the plant process simulation results, it was confirmed that when an appropriate decomposition rate is maintained in the reactor, the phenomenon of excess or shortage of fuel gas disappears. In addition, it became possible to reduce the amount of catalyst required and design the optimized capacity of the relevant processes.

• Journal of the Korean Institute of Gas
• /
• v.10 no.2 s.31
• /
• pp.22-26
• /
• 2006

In this study, modeling and simulation works using Aspen Plus were carried out for DME separation and purification process of pilot plant for the daily production of 50 kg of DME. For modeling of the entire DME separation unit, NRTL liquid activity coefficient model was used for the prediction of liquid phase non-idealities, Henry's law option was also used for the estimation of solubilities of light gases in solvents and SRK equation of state model was utilized for the description of vapor phase non-idealities. DME having over 98 wt% purity was obtained as a side distillate product in a DME purification column.

• Plant Journal
• /
• v.10 no.1
• /
• pp.34-39
• /
• 2014

Simulation works for comparing removal capabilities of acid gases contained in natural gas among several aqueous amine absorbents using commercial process simulator PROMAX(BR&E Co.) were carried out. Amine aqueous solution used in this study were 30 wt% MEA, 30 wt% DEA, 50 wt% MDEA, and 50 wt% MDEA with 3 wt% piperazine as additive. We obtained the simulated results that while MEA aqueous solution is relatively capable of more $CO_2$ gas, but DEA, MDEA, MDEA aqueous solutions with piperazine as additive are capable of more $H_2S$ gas. Also, we found that 30 wt% MDA aqueous solution is the smallest circulate rate of lean amine solution, and 50 wt% MDEA aqueous solution with 3 wt% piperazine as additive is the smallest heat duty in stripping unit. 50 wt% MDEA aqueous solution with 3 wt% piperazine as additive is found less amine circulation rate than 50 wt% MDEA due to the introduction of additive.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.05a
• /
• pp.9-14
• /
• 1998

석탄가스화 복합발전시스템(Integrated Gasification Combined Cycle, IGCC)은 기존의 미분탄 연소 발전 방식에 비해 발전효율이 5-10%이상 높고, 공해물질 배출 특성에 있어서도 SOx와 NOx를 각각 95% 및 75% 이상 감소시키고 재는 용응 슬러 형태로 처리하는 발전시스템이다. 이와 같은 고효율 및 환경 친화적인 특성으로 인하여 IGCC 시스템은 차세대 석탄화력 발전 방식으로서 각광받고 있으며, 이미 선진 공업국들은 70년대 석유파동 이후 IGCC 기술의 개발을 활발히 진행하여, 최근에는 250MW 이상 출력의 상용화급 플랜트를 가동 또는 건설 중에 있으며, 머지않아 상업화에 도달할 전망이다. 또한 국내에서도 최근 전력 수요의 급증과 전 세계적으로 확산되고 있는 환경 규제의 강화 등으로 우리의 실정에 맞는 IGCC 공정의 개발이 활발히 진행되고 있다. (중략)

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.62-63
• /
• 1996

상수처리 시스템엣의 분리막의 적용시 효과적인 공정운영을 위해 여러가지 운전조건이 있으나 막내에 축적되는 막오염이 주요문제로 인식되고 있다. 막오염은 막 표면이나 세공에서 물질의 흡착, 부착 및 축적등과 같은 일련의 메카니즘에 의해 물의 유속을 저하시키는 결과를 초래하며 분리막 공정에서 커다란 경제적 손실을 가져다 줄 수 있으므로 막오염을 조절할수 있는 인자들의 제어는 실플랜트에서 중요한 과제이다. 분리막을 이용한 상수처리 시스템에서의 운전 조건들은 온도, 압력, 선속도, pH등이 있으며 안정적이며 경제적인 투과 flux를 위해서는 실험실적 규모를 통해 최적 조건을 선정해 주어야 한다. 따라서 본 연구는 이러한 막오염을 제어하고 최적 운전조건을 선정하기 위해 상수원수로 호소수에 포함되어 있는 유기물의 대부분을 차지하리라 생각되는 humic acid와 무리물질인 kaolin을 모사용액으로 제조하여 막오염과 운전조건과의 상호작용을 cake 저항, 비저항 값으로 측정하여 장기간의 field test에 필요한 최적 운전조건을 선정해 주었다.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.3
• /
• pp.173-179
• /
• 2019

Cryogenic air separation unit produces various gases such as $N_2$, $O_2$, and Ar by liquefying air. The process also varies with diverse production conditions. The one for SNG production among them has lower efficiency compared to other air separation unit because it requires ultrapure $O_2$ with purity not lower than 99.5%. Among factors that reduce the efficiency of air separation unit, power consumption due to compress air and heat duty of double column were representatives. In this study, simulation of the air separation unit for SNG production was carry out by using ASEPN PLUS. In the results of the simulation, 18.21 kg/s of at least 99.5% pure $O_2$ was produced and 33.26 MW of power was consumed. To improve the energy efficiency of air separation unit for SNG production, the sensitivity analysis for power consumption, purities and flow rate of $N_2$, $O_2$ production in the air separation unit was performed by change of air boosting ratios. The simulated model has three types of air with different pressure levels and two air boosting ratio. The air boosting ratio means flow rate ratio of air by recompressing in the process. As increasing the first air boosting ratio, $N_2$ flow rate which has purity of 99.9 mol% over increase and $O_2$ flow rate and purity decrease. As increasing the second air boosting ratio, $N_2$ flow rate which has purity of 99.9 mol% over decreases and $O_2$ flow rate increases but the purity of $O_2$ decreases. In addition, power consumption of compressing to increase in the two cases but results of heat duty in double column were different. The heat duty in double column decreases as increasing the first air boosting ratio but increases as increasing the second air boosting ratio. According to the results of the sensitivity analysis, the optimum air boosting ratios were 0.48 and 0.50 respectively and after adjusting the air boosting ratios, power consumption decreased by approximately 7% from $0.51kWh/O_2kg$ to $0.47kWh/O_2kg$.

• Journal of Energy Engineering
• /
• v.6 no.1
• /
• pp.87-95
• /
• 1997

A chemical heat pump based on the reversible reactions between metal chlorides and ammonia gas is attractive alternative to compression system and liquid absorption systems in cooling and refrigerating fields. The advantages of chemical heat pump are no regulatory constants due to CFC refrigerants, utilization of gas, industrial waste heat, electricity, fuel oil etc. as heat sources and wide applications to energy storage system, large-scale energy managements for industrial process. The scale-up of chemical heat pump from laboratory prototype to pilot plants necessitates the interpretation of system performance and evaluation of dynamic behavior in the chemical reactor. This study contains the prediction of performance of chemical refrigerator according to operating condition, the dynamic simulations through reactor modelling, which is used for the calculation of reactive medium temperature and the conversion variation with reactor cooling temperature, and the effect survey of block parameters on the power of refrigerator.