• Journal of the Korean Ceramic Society
• /
• v.36 no.4
• /
• pp.444-450
• /
• 1999

Hydroxyapatite(HA) was spray-coated to alloy substrate(Ti-6Al-4V) using plasma-spray process for bioceramic application The coating morphology composition and crystallinity were influenced by following process parameters ; stand-off distance spray power level and auxiliary gas pressure. These parameters have been systematically varied in the present study to evaluate their relative influence on the coating qual-ity and to seek an optimum spraying condition. Amorphicity and decomposition of HA increased with stand-off distance and the imperfect coating layer was obtained at the short stant-off distance (55mm). The cry-stallinity of HA coating decreased with spray power level and auxiliary gas pressure but the bond strength between the HA coated layer and Ti alloy substrate increased with the spray power level.

• Journal of Power System Engineering
• /
• v.6 no.4
• /
• pp.56-61
• /
• 2002

This study is to investigate the wear behaviors of thermally sprayed ceramic coating by a pin-on-disk wear testing machine. The test specimens were plasma sprayed TiO2 coating material on carbon steel substrate(S45C) with Ni-4.5%Al alloy bond coating. Wear characteristics, friction coefficient and wear rates, were conducted at the three kinds of loads and velosities. Wear environments were dry and lubrication friction. The friction coefficients of TiO2 coating specimen in dry friction were almost same according to increase the friction velocity. The wear rate increased when the friction force is high. In lubrication friction, the wear hardly occured and friction coefficient was about 0.1. The adhesiveness of TiO2 in lubrication friction is larger than that in dry one.

• Journal of Welding and Joining
• /
• v.7 no.2
• /
• pp.25-34
• /
• 1989

The purpose of this work is to coat ZrO$_{2}$ - 8Y$_{2}$O$_{3}$ ceramic on the Al cast alloy(AC-8A) by using the plasma spray method. Two types of coatings which were composed of two and three layer coating were examined. Each coating powder was analyzed for shape and size distribution and X-ray diffraction pattern. For the coated layers, microstructural analysis and performance estimation which was composed of static thermal test, thermal cyclic test and thermal shock test were conducted.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.329-329
• /
• 2010

반도체 및 디스플레이의 진공부품은 알루미늄 모제에 전해연마법(electrolytic polishing), 양극산화피막법(Anodizing), 플라즈마 용사법(Plasma spray) 등을 사용하여 $Al_2O_3$ 피막을 성장시켜 사용되고 있다. 반도체 제조공정 중 30~40% 이상의 비중을 차지하는 식각(etching) 및 증착(deposition) 공정은 대부분 플라즈마를 사용하고 있다. 플라즈마에 의해 화학적, 물리적 침식이 발생하여 코팅막에 손상을 일으켜 코팅막이 깨지거나 박리되면서 다량의 Particle을 생성함으로써 생산수율에도 문제를 야기 시킨다고 알려져 있다. 하지만 이들 코팅막을 평가하는 방법은 거의 전무하여 산업계에서 많은 애로를 겪고 있다. 이러한 코팅부품의 내플라즈마 성능평가 방법과 기준이 없어 적절한 교체시기를 파악하기 위한 코팅부품의 손상정도를 정량화 및 평가 방법의 표준화를 구축하는 연구를 수행하였다. 본 연구에서는 이러한 소재의 특성평가를 위해 공정에서 사용 중 손상되어 교체된 샘플의 모폴로지 관찰하고 내전압 측정으로 전기적 특성을 분석하여 손상 전, 후의 변화를 관찰하였다. 또한 플라즈마의 영향에 따른 코팅 막 형태 변화 및 전기적 특성의 변화를 알아보기 위하여 양극산화피막법(Anodizing)으로 $Al_2O_3$를 성장시킨 평가용 샘플을 제작한 후, Plasma chamber 장비를 이용하여 플라즈마 처리에 따른 코팅막의 내전압, 식각율, 표면 미세구조의 변화를 측정하였고 이를 종합적으로 고려하여 진공 장비용 코팅부품의 공정영향에 의한 내플라즈마 특성평가방법 개발에 관하여 연구하였다. 이러한 실험을 통해 플라즈마 처리 후 코팅 막에 크랙이 발생되는 것을 확인할 수 있었고 코팅 막의 손상으로 전기적 특성이 감소를 것을 확인할 수 있었다. 또한 ISPM 장비를 이용하여 진공 장비용 코팅부품이 플라즈마 공정에서 발생하는 오염 입자를 측정할 수 있는 방법을 연구하였다. 이러한 결과를 이용하여 진공공정에서 사용되는 코팅부품이 플라즈마에 의한 손상정도를 정량화 하고 평가방법을 개발하여 부품 양산업체의 진공장비용 코팅부품 개발 신뢰성 향상이 가능할 것으로 본다.

• Korean Journal of Materials Research
• /
• v.9 no.4
• /
• pp.428-433
• /
• 1999

An objective of this study is to compare the characteristics of coating layer of plasma sprayed fine $Al_2O_3$ and those of layer by commercial $Al_2O_3$(Metco 105). The microstructure of fine $Al_2O_3$ coating layer was denser compared with commercial $Al_2O_3$ coating layer. The surface roughness$(R_a)$ of the layer by the fine $Al_2$O$_3$ was lower compared with that of commercial $Al_2O_3$. Thickness of splat for fine $Al_2O_3$ was $1.4\mu\textrm{m}$ while the commercial $Al_2O_3$ was $3.53\mu\textrm{m}$. The main phase existing in coating layer was of $\gamma-Al_2O_3$ and the fraction of $\alpha-Al_2O_3$ in fine $Al_2O_3$ coating layer was 8.39% and that of commercial $Al_2O_3$ was 13.79%. Microhardness was no great difference between the fine and commercial $Al_2O_3$ but deviation of the fine $Al_2O_3$ coating layer was relatively large. Accordingly, the strength of splat of the coating was expected that fine $Al_2O_3$was lower than commercial $Al_2O_3$ powder.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.142-142
• /
• 2013

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.106-106
• /
• 2013

C/C Composite는 비교적 낮은 온도에서 산화되어 고유의 특성을 쉽게 잃어버리게 된다. 본 연구에서는 Plasma Spray 코팅방법을 사용하여 다층 코팅층을 형성 시킨 후 $1600^{\circ}C$의 온도에서 열충격 저항성을 평가하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.11a
• /
• pp.57-59
• /
• 2001

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.7 s.166
• /
• pp.1245-1252
• /
• 1999

The sliding wear behavior of $Al_2O_3/NiCr$ coating deposited on steel(SM45C) was investigated under lubrication. The parameters of sliding wear are normal loads, coating thickness. As a result, the wear resistance of $Al_2O_3/NiCr$ coating was remarkably greater than that of $Al_2O_3$ coating. The optimized coating thickness was found to be $300{\mu}m$ to ensure good anti-wear. The bond coating played important role in decreasing residual stress. The residual stress had much influence on wear mechanism. These results were correlated with the stress state of coating and the microstructure of coating.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.52-53
• /
• 2020

The thermal spray coating process is being used to protect the metals and alloys from wear, abrasion, fatigue, tribology, and corrosion failure. Therefore, in the present study, Al and Zn was deposited by plasma arc thermal spray process onto the steel substrate and their performance was assessed. The bond adhesion result shows that Al coating has higher value attributed to compact, dense, and less porous compared to Zn coating which contain defects/pores and uneven morphology assessed by scanning electron microscopy (SEM). Electrochemical results show that the Al coating exhibited higher impedance value compared to Zn in artificial ocean water solution at prolonged exposure periods. However, both coatings show the increment in polarization resistance with exposure periods which reveal that porosity of coatings is filled by the corrosion products.