• Proceedings of the Korean Information Science Society Conference
• /
• 한국정보과학회 2005년도 한국컴퓨터종합학술대회 논문집 Vol.32 No.1 (A)
• /
• pp.235-237
• /
• 2005

디지털 형식으로 저장되어 있는 데이터의 불법적인 복사와 재분배는 전자상거래 상에서 디지털 컨텐츠를 판매하는 상점에게 매우 큰 문제가 된다. 핑거프린팅 기법은 암호학적인 기법들을 이용하여 디지털 컨텐츠를 불법적으로 재배포한 사용자를 찾아냄으로써 저작자의 저작권을 보호한다. 비대칭적 핑거프린팅 기법은 대칭적인 기법과 달리 사용자만이 핑거프린트가 삽입된 컨텐츠를 알 수 있어 사용자가 컨텐츠를 재배포했을 경우만 사용자가 고발되는 기법이다. 본 논문에서는 신뢰기관을 이용한 비대칭적 핑거프린팅 기법을 제안한다. 사용자의 핑거프린트는 신뢰기관이 생성하고 사용자의 익명공개키 쌍과 준동형의 암호를 이용하여 컨텐츠에 핑거프린트를 삽입함으로써 상점은 사용자의 핑거프린트를 알 수 없도록 하여 비대칭성을 만족하여 컨텐츠가 재배포되었을 경우 상점은 신뢰기관으로부터 정보를 받아 재배포자를 추적할 수 있다.

• Journal of the Korea Society of Computer and Information
• /
• 제17권6호
• /
• pp.173-182
• /
• 2012

A recent advance in smart phones is increasing utilization of location information. Existing positioning system was using GPS location for positioning. However, the GPS cannot be used indoors, if GPS location has an incorrectly problem. In order to solve indoor positioning problems of indoor location-based positioning techniques have been investigated. There are a variety of techniques based on indoor positioning techniques like as RFID, UWB, WLAN, etc. But WLAN location positioning techniques take advantage the bond in real life. WLAN indoor positioning techniques have a two kind of method that is centroid and fingerprint method. Among them, the fingerprint technique is commonly used because of the high accuracy. In order to use fingerprinting techniques make a WLAN signal map building that is need to lot of resource. In this paper, we try to solve this problem in an Indoor environment for WLAN-based fingerprint of a virtual building technique, which is proposed. Proposed technique is classified Cell environment in existed Indoor environment, all of fingerprint points are shown virtual grid map in each Cell. Its method can make fingerprint grid map very quickly using estimate virtual signal value. Also built signal value can take different value depending of the real estimate value. To solve this problem using a calibration technique for the Splite-tree is proposed. Through calibration technique that improves the accuracy for short period of time. It also is improved overall accuracy using predicted value of around position in cell.

• Journal of KIISE:Computer Systems and Theory
• /
• 제34권7호
• /
• pp.288-295
• /
• 2007

The illegal copying and redistribution of digitally-stored information is a crucial problem to distributors who electronically sell digital data. fingerprinting scheme is a technique which supports copyright protection to track redistributors of electronic information using cryptographic techniques. Anonymous asymmetric fingerprinting scheme prevents the merchant from framing a buyer by making the fingerprinted version known to the buyer only. And this scheme allows the buyer to purchase goods without revealing her identity to the seller. In this paper, a new anonymous asymmetric fingerprinting scheme with TTP is introduced. The buyer's fingerprint is generated by the Fingerprint Certificate Authority which is a TTP. When the seller embeds the fingerprint in the digital data, the protocol uses the homomorphic encryption scheme. Thus the seller cannot know the buyer's fingerprint and the buyer's anonymity is guaranteed by using anonymous key pair.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.122-124
• /
• 2010

WPS(Wifi Positioning System) is a location determination technique that utilizes AP information scattered all over the real world. In general, the finger print technique is used for location calculations in WPS. However the finger print technique is a location determination technique that utilizes average values and has problems in the accuracy of the location determination. It also shows low performance of the system due to arithmetic operations. In this paper, the MSS(Max Signal Strength) method is proposed to resolve the existing problems in the finger print technique. The proposed method can reduce the operation time and improve the accuracy of the system under the same conditions. Test environments of the system is presented and the performance of the system is analyzed to verify the methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.239-241
• /
• 2011

Recently, studies on the indoor positioning system in application of wireless AP have been actively going on. The indoor wireless positioning system can be classified into several types according to the positioning techniques. Among them, the fingerprint technique is a technique that establishes the radio map by collecting MAC information of AP and RSSI (Received Signal Strength Indication) before executing positioning and then determines the position in comparison with the information of AP collected during the course of positioning. In the traditional fingerprint techniques, they control and manage by installing APs that are utilized for positioning. However, in case of specific indoors, the management can be done by installing a small number of APs but, in case of wide outdoors, it's practically impossible to install and manage equipments for positioning. In order to solve such problem, there is an improved fingerprint technique that utilizes the APs that are already scattered around. This technique will allow positioning without additional cost, but even the improved fingerprint positioning technique may incur dropped accuracy as well due to wide fluctuation of the AP information. In this paper, the traditional fingerprint technique and the improved fingerprint technique are explained in comparison, and we will compares difference in performance with the proposed WPS_WS (Wi-Fi Positioning System_Weak Signal) technique.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권1호
• /
• pp.92-98
• /
• 2014

Recently, Fingerprint approach using RSSI based on WLAN has been many studied in order to construct low-cost indoor localization systems. Because this technique is relatively evaluated non-precise positioning technique compared with the positioning of Ultra-Wide-Band(UWB), the performance of the Fingerprint based on WLAN should be continuously improved to implement various indoor location. Therefore, this paper presents a Fingerprint approach which can improve the performance of localization by using RSSI and LQI contained IEEE 802.15.4 standard. The advantages of these techniques are that the characteristics of each location is created more clearly by utilizing RSSI and LQI and Fingerprint technique is improved by using the modified Euclidean distance method. The experimental results which are applied in NLOS indoor environment with various obstacles show that the accuracy of localization is improved to 22% compared to conventional Fingerprint.

• Journal of IKEEE
• /
• 제26권4호
• /
• pp.560-567
• /
• 2022

This paper proposed an application of agile management method to resolve the electrical system issues identified during the mass production phase of aged aircraft performance improvement. The proposed method was applied from issue analysis to on-site verification and testing stage, before the formal configuration control process. At this time, the project was carried out by setting a sprint period to complete the verification according to requirements through daily scrum and sprint review. As a result, It was verified that the wiring installation of the aircraft, which was the output of the sprint, met requirements within the defined sprint period.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 한국방송공학회 2013년도 추계학술대회
• /
• pp.52-53
• /
• 2013

최근, 합법적 또는 비합법적 경로를 통한 만화 도서의 유통이 확산되고 있다. 만화 저작권자들의 권리를 보호하기 위해, 유통되는 만화 도서를 식별하는 기술은 매우 중요하다. 하지만, 만화 식별기술은 이제 연구가 시작되는 단계이며, 상업적인 활용을 위해서는 정확도 및 신속성 측면에서 많은 개선이 필요하다. 본 고에서는, 만화 도서의 콘텐츠 특성 기반의 핑거프린트 추출 기법을 제안하고, 만화 식별 시스템에 적용함으로써 제안하는 핑거프린트 추출 기법의 성능을 검증하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제38C권6호
• /
• pp.531-539
• /
• 2013

Fingerprinting technique uses the radio signal strength measured reference locations is typically used, although there are many Wi-Fi based location tracking techniques. However, it needs numerous reference locations for precision and accuracy. This paper the analyzes problems of previous techniques and proposes a fingerprinting system using reliability based on a signal strength map. The system collects the signal strength data from a number of reference locations designated by the developer. And then it generates path-loss models to one of the access points for each reference location. These models calculate the predicted signal strength and reliability for a lattice. To evaluate proposed method and system performance, We perform experiments in a $20m{\times}22m$ real indoor environment installed access points. According to the result, the proposed system reduced distance error than RADAR. Comparing the existing system, it reduced about 1.74m.

• Journal of Korea Multimedia Society
• /
• 제16권4호
• /
• pp.453-463
• /
• 2013

In this paper, we present an effective method and a system for the music summarization which automatically extract the chorus portion of a piece of music. A music summary technology is very useful for browsing a song or generating a sample music for an online music service. To develop the solution, conventional automatic music summarization methods use a 2-dimensional similarity matrix, statistical models, or clustering techniques. But our proposed method extracts the music summary by calculating BER(Bit Error Rate) between audio fingerprint blocks which are extracted from a song. But we could directly use an enormous audio fingerprint database which was already saved for a music retrieval solution. This shows the possibility of developing a various of new algorithms and solutions using the audio fingerprint database. In addition, experiments show that the proposed method captures the chorus of a song more effectively than a conventional method.