• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1076-1084
• /
• 2012

In the CS/CB(Coordinated Scheduling/Beamforming) scheme, the cell edge user throughput is increased by selecting MIMO (Multiple Input Multiple Output) precoders which can minimize the interferences from adjacent base stations (BSs). However, in current LTE(Long Term Evolution) systems, the serving cell is selected in the initialization stage by using the synchronization signals and cell specific reference signals transmitted by adjacent BSs with a single antenna. The selected BS in the initialization stage may not be the best one since the MIMO precoding gain has not been considered in the cell selection stage. In this paper, a new cell selection technique is proposed for LTE systems with MIMO precoder by taking into account the effect of the precoder in the initialization stage. The proposed technique enables a user equipment (UE) in the cell boundary to select the serving BS by using the information (channel rank, effective channel capacity, and effective SINR(Signal to Interference plus Noise Ratio)) acquired from cell specific reference signals of candidate BSs. It is verified by computer simulation that the proposed technique can increase the channel capacity significantly in the multi-cell environments, compared with the conventional CS/CB scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1903-1913
• /
• 2016

In this paper, we propose 2-stage beamformer with linear receiver in wireless backhaul downlink system where macro base station has large antenna array with sub-array structure. Also, to compare the system capacity, we apply 3-stage beamformer with zero-forcing precoder and calculate the achievable sum rate of received small cell base stations. Considering scattering and path-loss property of wireless backhaul channel, we combine precoding technique for spatial multiplexing and beamforming technique to overcome path-loss. Therefore, we design DFT-based fixed beam patterns for the first stage. The simulation results show that considering spatial multiplexing, proposed 2-stage beamformer with linear receiver can increase the achievable sum rate as well as reduce the feedback information.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.68-69
• /
• 2016

ISO/IEC 13818-1 MPEG2 시스템의 타이밍 모델은 인코더에 들어간 비디오와 오디오 샘플들이 일정한 딜레이가 지난 후 디코더에서 정확히 한 번씩 나타나는 식으로 구현된다. 해당되는 디코더는 타이밍 모델에 부합하여 대응되는 비트스트림을 전달받는다. 이를 통해서 적절하게 동기화가 이루어진 고품질 오디오와 비디오를 위한 디코더 구현을 쉽게 할 수 있다. 반면에, RTP 타이밍 모델은 실제 프리젠테이션 시간에 관한 타이밍 정보를 가지고 있지 않다. 데이터 패킷의 타임스탬프는 상대적 타이밍을 제공하고, RTCP 송신자는 스트림 간 동기화에 대한 정보를 제공하지만 RTP 수신기에서는 버퍼링의 량이나 패킷의 디코딩 시간에 대한 정보를 주지 않는다. 따라서 RTP는 유동적인 전송 지향적인 타이밍 모델을 가지고 있다. 반면에 MPEG-2 시스템은 정확한 타이밍 모델을 수신측을 위해 제공하고 있다. 본 논문에서는 MPEG-2 시스템과 RTP의 타이밍 모델의 이점을 가져와 MMT 시스템을 위한 타이밍 모델을 제안한다.

• Information and Communications Magazine
• /
• v.32 no.10
• /
• pp.41-47
• /
• 2015

본고에서는 해밍(Hamming) 부호화된 미지의 신호를 바탕으로 전송된 채널 코딩의 종류에 대해서 알아낼 수 있는 알고리즘을 제안한다. 우선 해밍 코드의 부호화, 복호화 과정을 설명한다. (n,k) 해밍 코드의 부호화 과정을 위하여 사용되는 제너레이터 행렬 G는 (k * n)의 크기를 갖게 되며 복호화 과정을 위하여 사용되는 패리티 체크 행렬 H는 (n-k * n)의 크기를 갖게 된다. 그리고 설계한 알고리즘의 동작원리를 수신 신호의 상태에 따라 설명한다. 수신 신호의 앞에 프리앰블이 있는 경우나 수신신호가 Inverse 또는 Reverse 되어 있는 등 여러 경우에 대비한 알고리즘 설계 방법을 알아본다. 이렇게 설계한 알고리즘은 복잡도가 낮고 확장이 용이하며 수신 신호의 코드워드의 시작점을 쉽게 알 수 있는 장점을 가지고 있어 일반 사용자의 통신 시스템 뿐만 아니라 군사용 통신 체계에 적용하기에도 적합하다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.502-505
• /
• 2007

웹프로그래밍 환경에서 프리젠테이션 로직을 구성하는 서버처리 웹페이지에는 디자인을 위한 HTML 요소와 로직을 구현하기 위한 서버측, 클라이언트측 스크립팅 요소가 혼합되어 있다. 이와 같은 경우 스파게티 코딩에 의해 웹디자이너와 웹프로그래머간의 작업의 경계가 불분명해지고 디자인과 로직의 구성이 정렬되지 못하는 문제점이 발생할 수 있다. 본 논문에서는 이러한 문제점을 해결하고 웹페이지의 가독성과 재사용성을 향상시키기 위한 리마커블 코드 분리 모델을 제안한다. 이를 통해 웹페이지 수준에서 HTML 요소와 스크립팅 요소를 완전하게 분리하고 관련 연구와 차별화되는 플랫폼 독립적이고 언어 중립적인 웹페이지 모듈화 과정을 소개하고자 한다.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.2
• /
• pp.251-266
• /
• 1996

In this paper, we design MHEG engine that can generate MHEG objects and present It to the users in Multimedia/Hypermedia Applications In the MHEG engine, the transmitted MHEG objects decoded into internal format. For the easy interpretation of MHEG objects, we define internal format as to be matched for each MHEG object. We easily processobjectinformation using the tree data structure because object inheritance and possession can be represented in tree structure. Object inheritance and possession must be represented in the internal format because they used in resolving the reference to external objector data file. The presentation synchronization extracts the synchronization information from MHEG composite objects, representing and controlling heterogencous media associated to spatio- temporal relation. In order to exactly represent the spatio-temporal synchronization included into MHEG composite object, we propose the algorithm that processes synchronization using the message of the synchronization module and the internal objects. MHEG engine proposed in this paper may be basic technology fro multimedia application area using Korea New Net.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.8
• /
• pp.890-895
• /
• 2016

As the wireless communication technique is developing rapidly, the use of smart devices is increasing. Due to gradually increasing data traffic, a new area, more than 6GHz of bandwidth to increase capacity of the network, has been studied. Millimeter Wave(MmWave) communications utilizes the bandwidth above 6GHz, which makes it possible to achieve one gigabit per second data rate. To overcome the path loss due to the smaller wavelength, the mass of the antenna arrangement is used. This paper presents an algorithm that maximizes the spectral efficiency of the system in the pre-coding process using a hybrid beamforming. Also it is suggested with the optimization of the number of beams that maximizes the spectral efficiency was maximized by the propose method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.10
• /
• pp.843-850
• /
• 2013

Cognitive radio systems have been considered as a strong solution of frequency scarcity due to the limit of frequency resources. This paper proposed an active interference management scheme that the secondary system can coexist with the primary system in the same frequency band without interference. Using the proposed protocol, the secondary user acquires interference channel information and transmit/receive filter information and designs precoding matrix using these information. Since interference from the secondary systems are collected to unused subchannels of the primary system, the primary system can suppress interference without additional process. The secondary systems suppress interference from the primary system using whitening matched filter so that the spectral efficiency can be improved. Numerical results provides that the proposed scheme improves performance of the secondary systems without interference to the primary system and do not degrade performance of the primary system even if the number of the secondary systems increases.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.55-62
• /
• 2019

In this paper, we consider K-user multiple-input multiple-output (MIMO) interference channel and present a transceiver design for simultaneous wireless information and power transfer (SWIPT) systems. In addition, we consider a SWIPT system where an information decoding receiver and an energy harvesting receiver are co-located at the same receiver. In the proposed scheme, signal-to-leakage plus noise ratio (SLNR) is used as a cost function and a transceiver is designed to satisfy the threshold of the harvested energy. More specifically, transmitter precoding vector, receiver filter vector, and power spitting factor are simultaneously designed to maximize SLNR with a constraint on the harvested energy. Through computer simulation, we compare the signal-to-interference plus noise ratio (SINR) performance of the proposed and conventional schemes. When a special condition among the number of transmit antennas, receive antennas, and users is satisfied, the proposed scheme showed better SINR performance than the conventional scheme at low signal-to-noise ratio (SNR) range. Also, when the condition is not satisfied, the proposed scheme showed better performance than the conventional scheme at all SNR range.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.3
• /
• pp.6-12
• /
• 2011

The fast growing of the number of users requires the development of reliable communication systems able to provide higher data rates. In order to meet those requirements, techniques such as Multiple Input Multiple Out (MIMO) and Orthogonal Frequency Division multiplexing (OFDM) have been developed in the recent years. In order to combine the benefits of both techniques, the research activity is currently focused on MIMO-OFDM systems. In addition, for a fast wireless channel environment, the data rate and reliability can be optimized by setting the modulation and coding adaptively according to the channel conditions; and using sub-carrier frequency, and power allocation techniques. Depending on how accurate the feedback-based system obtain the channel state information (CSI) and feed it back to the transmitter without delay, the overall system performance would be poor or optimal. In this paper, we propose a Signal to Noise Ratio (SNR) estimation algorithm where the preamble is known for both sides of the transciever. Through simulations made over several channel environments, we prove that our proposed SNR estimation algorithm is more accurate compared with the traditional SNR estimation.