• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.9-18
• /
• 1996

This paper describes a potential-based panel method for the prediction of unsteady performance of a marine propeller operating in a non-uniform flow field. Boundary-value problem, formulated by distributing the normal dipoles and sources on the blade, the hub and the shed wake, is descretized and numerically analyzed in a discretized time domain. Through an extensive test and comparison with the analytic solution, the convergence in time step is verified for a two-dimensional foil. Unsteaty analysis is then carried out for the DTRC 4118 propeller operating in a harmonic wake, and compared favorably with the experimental result. The present method is shown applicable to the analysis of unsteady performance of the propellers.

• Journal of Aerospace System Engineering
• /
• v.12 no.4
• /
• pp.26-34
• /
• 2018

Structural static test and the performance test were conducted to determine whether the propeller developed for a multi-copter with the take-off weight of 25 kg satisfies the design requirement. The result of the structural test revealed that the propeller had a safety margin of 3 or more as the ultimate load and requirement load did not cause the specimen breakage. In the performance test, the propeller generated the hover thrust and maximum thrust of design requirement, and hover efficiency in the operating thrust range was greater than 0.73. Maximum hover efficiency increased by more than 3% compared to the reference propeller and electric power consumption decreased by more than 4% in the operating range. The propeller was found to be successfully developed based on the satisfaction rate of the structural strength requirement and the performance requirement.

• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.45-48
• /
• 2012

본 연구는 인력기를 개발함에 있어서 이에 적합한 프로펠러의 형상을 설계하기 위하여 진행되었다. 인력기는 인간을 유일한 동력원으로 사용하기 때문에 적은 동력, 낮은 RPM을 가지고 비행을 하게 된다. 이에 따라 기존의 항공기와는 다른 특성 및 형상을 가지는 프로펠러 개발의 필요성이 인지되었다. 본 연구에서는 설계하고자 하는 인력기의 제원에 맞는 프로펠러의 특성을 설정한 뒤, 프로펠러의 블레이드를 수 개의 airfoil section으로 나누고, 각 섹션에 대한 공력 특성을 프로펠러 이론 및 Edison CFD를 통하여 계산 및 유추하였다. 이 계산 결과를 토대로 구한 각 airfoil section의 정보를 통하여 프로펠러의 형상을 얻어 낼 수 있었으며, 최종적으로 이를 ANSYS Fluent, CFX와 같은 상용 프로그램을 이용하여 분석함으로써 설계 전에 목표로 하였던 프로펠러의 성능에 도달하였는가를 확인할 수 있었다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.162-163
• /
• 2021

그래핀수지로 기존에 황동(Ni-Al-Bronze) 프로펠러 대체 가능 제품의로 고가의 황동을 그래핀수지 특히 재생 플라스틱 활용으로 저가로 공급 가능하다. 또한, 재활용이 가능한 친환경 프로펠러임, 가벼운 소재를 이용하여 연료 효율 증대, 연료 효율을 향상시켜 연안해운 저탄소 실현, 마찰저항을 최소화하여 선박의 추진성능 개선, 해양생물 부착 방지(방오기능)를 통한 프로펠러 수명연장 기대, 프로펠러 검사 및보수 유지비용 절약 기대, 향후 폐기물에 그래핀을 혼합한 재생 자재로 활용 가능이 크다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.1
• /
• pp.59-66
• /
• 2014

In the case of a propeller-driven aircraft, power-on effect generated by the propeller has a strong influence on the performance and the stability of an aircraft directly and indirectly. A numerical study on the power-on effect has been performed using the CFD based on the multiple reference frame and sliding mesh model. The power-on effect increases the overall lift and the maximum lift of the aircraft. In addition to lift increment, power-on effect delays the stall of the aircraft. On the other hand, the power-on effect increases the drag significantly and consequently decreases the lift-to-drag ratio of the aircraft. Furthermore, the power-on effect decreases the nose-down pitching moment and consequently decreases the longitudinal static stability of the aircraft. It is expected that the analysis results presented and discussed in this report will be used as an important material for analyzing the aircraft performance and stability and will contribute the development of the propeller-driven aircraft with the pusher propeller.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.7
• /
• pp.581-593
• /
• 2017

In order to develop high efficiency propeller for multicopter type UAV, we designed, analyzed and tested aerodynamic and structural dynamics. For the design of the high efficiency propeller, the optimum design method was applied for the determination of the airfoil and the three-dimensional planform is designed to reduce induced power of the propeller. The flight suitability of the derived shape was determined through structural design and analysis. The rotation test was performed to confirm the performance of the analytically designed shape. In this paper, we propose a procedural propeller design methodology using these design analysis test methods.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.1
• /
• pp.46-52
• /
• 2005

A propeller as a propulsion system has been redesigned to improve performance of a target drone. The vortex theory has been applied for the propeller design method. Design variables have been the chord length along the direction of blade radius, the change of blade radius, and the geometric angle of the blade. The existing propeller has been redesigned and modified considering engine RPM change to get the improved thrust at both low and high speeds.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.2
• /
• pp.89-97
• /
• 2020

In this study, a numerical analysis was performed on 26 inch single and coaxial propeller using the ANSYS Fluent 19.0 Solver to analyse the effect of the distance between coaxial propellers as one of the design parameter. The Moving Reference Frame (MRF) method was used for single propeller, while the sliding mesh method was used for a coaxial propeller to analyse the flow field varying with azimuth angle. The thrust and power are decreased as the upper and lower propeller approaching each other. As H/D is increased, interference between the propellers is decreased. According to the flow field variable contour of the coaxial propeller, it appears that the change in aerodynamic performance is due to the loading effect and the tip vortex wake effect.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2001.11a
• /
• pp.26-26
• /
• 2001

소형항공기용 IO-540 왕복엔진을 대상으로 추진기관의 성능에 미치는 배압 특성을 조사하기 위해서 지상 성능시험을 수행하였다. 본 시험은 6가지 배기조건에 대해서 엔진의 배압과 흡기압력, 토크, 그리고 프로펠러의 정지추력을 측정하였다. 엔진의 배압은 대체로 머플러를 장착할 경우와 배기관 끝단이 상대적으로 직경이 작고 길이가 길수록 증가하였다. 배압 특성은 특히 엔진의 회전속도가 고속 영역으로 갈수록 프로펠러 추력에 변화를 나타냈으며 전반적으로 추진기관 성능에 미세한 영향을 미치는 것으로 나타났다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.6
• /
• pp.455-462
• /
• 2017

In recent decades, many researchers have been struggling to developing the compound aircraft that is capable high speed and VTOL flight. And in recent years, multi-copters are very popular because of having advantages of VTOL and easy handling, but they are lack of doing long-range mission. Therefore, we presents simple aircraft architecture which is equipped fixed wing, multi propellers and no control surfaces. In this paper, we designed the attitude control for the compound aircraft prototype and measured the attitude control performance with flight test for validating prototype's performance. We analysed the attitude control test result comparing with similar size of a fixed wing aircraft. The performance was almost same as fixed wing aircraft.