• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.132-145
• /
• 1992

A series of design, theoretical analysis and model test procedures is presented for the development of an axisymmetric stator-propeller system. A preswirl stator is located in front of a propeller in order to improve the propulsion efficiency by cancellation of the slip stream rotational velocity due to the propeller. Model test results show that propulsion efficiency gain due to the symmetric stator-propeller system is about 3% compared to the single propeller. This efficiency gain would increase for full scale application since the pressure drag coefficient of the stator would decrease due to increasement of turbulent intensity behind the hull wake and increasement of Reynolds number.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.23-30
• /
• 2001

The cavitation noise of high-speed propellers was experimentally studied using new measurement device in KRISO cavitation tunnel. A series of cavitation noise tests were carried out for 6 propellers with various sections, loading distributions, and a different area ratio. From the experimental results, the noise characteristics for various cavitation patterns and the noise performance for a series of propellers were analyzed. These can be used for full-scale prediction study of the noise and optimum design of high-speed propellers.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.31
• /
• pp.14-24
• /
• 2011

최근 국제유가 상승과 탄소배출량 규제에 따른 친환경 선박의 개발 요구가 증대되고 있으며 이는 일반선 뿐만 아니라 어선에서도 마찬가지이다. 본 논문에서는 유류비 증가 및 어선의 노후화 등으로 인한 국내 어업 경쟁력의 약화 및 채산성 악화를 극복하기 위한 방안으로 연근해 어선용 추진기 개발을 위한 연구를 수행하였다. 현재 국내 어선현황에 기초하여 대표 선종인 130톤급 예망어선을 대상선으로 선정하고 추진기의 추진성능을 이론 및 실험적으로 평가 분석하였으며, 모형 시험 및 수치 해석 결과를 종합해 볼 때, 대상선의 프로펠러는 과도한 캐비테이션이 발생되는 상태에서 매운 높은 수준의 소음과 진동이 발생하는 것으로 추측된다. 이는 어선의 추진력 감소에 따른 연료비의 증대, 캐비테이션에 의한 추진기 손상, 과도하게 발생되는 소음에 따른 어획량 감소의 주된 원인이 된다. 본 연구를 통해 일반 상선의 추진성능 평가에 적용되는 최신 기술을 어선 추진기에 적용하여 모형시험 및 이론 성능 평가 과정을 정립하였으며, 이를 통해 앞으로 어선 추진기의 성능을 상당 부분 개선할 수 있음을 확인하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.6
• /
• pp.455-462
• /
• 2017

In recent decades, many researchers have been struggling to developing the compound aircraft that is capable high speed and VTOL flight. And in recent years, multi-copters are very popular because of having advantages of VTOL and easy handling, but they are lack of doing long-range mission. Therefore, we presents simple aircraft architecture which is equipped fixed wing, multi propellers and no control surfaces. In this paper, we designed the attitude control for the compound aircraft prototype and measured the attitude control performance with flight test for validating prototype's performance. We analysed the attitude control test result comparing with similar size of a fixed wing aircraft. The performance was almost same as fixed wing aircraft.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.4
• /
• pp.248-254
• /
• 2013

Recently, contra-rotating propellers (CRP) having higher efficiency draw much attention since the EEDI regulation of IMO has been enforced. In this paper a numerical method based on the vortex lattice potential theory with a wake model and an experimental procedure with a newly built measuring device, specifically focusing on CRPs, are introduced. And they are applied to a series of CRP known to be designed for the purpose of improving EEDI. The numerical and experimental results showed good agreement explaining the characteristics of the CRP properly. The proposed method is believed to be effectively used for various CRP related studies.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.3
• /
• pp.199-208
• /
• 2014

In this study, propeller open water characteristics ($K_P$, $K_T$ and ${\eta}_o$) were compared for three different ducted propellers using a Computational Fluid Dynamics (CFD) analysis, as well as an experimental test at a basin. The best shape of the duct was selected from the three types of specially designed ducts based on the CFD analysis results. The same propeller model (Kaplan type propeller) was used inside all three duct models, and the propeller open water characteristics were compared, predominantly at the design speed for an underwater vehicle. Finally, the results of the CFD test simulations for the selected duct case were verified by experimental open water tests in a towing tank.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.1
• /
• pp.36-43
• /
• 2017

The results of a numerical study on the performance of a propeller operating near a free surface are presented in this paper. The simulations are verified through comparison with experimental data, which was performed in a circulating water channel. The propeller performance as a function of the submerged depth was investigated. The effect of the propeller advance ratio on the wave patterns, flow structures around propeller, and thrust and torque of the propeller was also studied. Air ventilation was not observed for low advance coefficients. However, the simulations showed that wave pattern was strongly related to the tip vortex strength and inflow velocity. When air ventilation does not occur, the deduction of propeller thrust and torque increase for high advance coefficients.

• Journal of Aerospace System Engineering
• /
• v.13 no.1
• /
• pp.47-53
• /
• 2019

To improve an aerodynamic characteristic of the eVOTL aircraft, Korea Aerospace Research Institute (KARI) performed a validity test of the cross-rotating propeller technology. First, CFD analysis was carried out and an idea of the cross-rotating propeller to imply on a multi-copter confirmed with a commerce pitch control multi-copter that has two different blades, 0.11 and 0.21 m. After verifying the idea, a multi-copter with about 3 kg maximum take-off weight (MTOW) was custom designed to complete a ground test to measure thrust and noise. The test was performed with 15 and 22 in. propellers at the identical tip speed. The test results show that the 22 in. propeller with the cross-rotating technology required about 30 % less power and reduced 3~5 dB aerodynamic noise as compared to 15 in. propeller without cross-rotating.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.3
• /
• pp.57-68
• /
• 2012

In this study, designs of the high efficiency composite propeller blade for a high speed turboprop aircraft, which will be used for a next generation regional commercial aircraft in Korea, are performed. Both the vortex theory and the blade element theory are used for preliminary aerodynamic design and performance analysis of the propeller. Then the aerodynamic design result is confirmed through performance analysis using a commercial CFD code, ANSYS. The carbon/epoxy composite materials is used, and the skin-spar-foam sandwich type structure is adopted for improvement of lightness and structural stability. Finally, it is investigated that the proposed propeller blade has high efficiency and structural safety through both aerodynamic and structural analysis and experimental test of a prototype propeller blade.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.253-258
• /
• 2012

In this study, designs of the high efficiency composite propeller blade for a high speed turboprop aircraft, which will be used for a next generation regional commercial aircraft in Korea, are performed. Both the vortex theory and the blade element theory are used for preliminary aerodynamic design and performance analysis of the propeller. Then the aerodynamic design result is confirmed through performance analysis using a commercial CFD code, ANSYS. The carbon/epoxy composite materials is used, and the skin-spar-foam sandwich type structure is adopted for improvement of lightness and structural stability. Finally, it is investigated that the proposed propeller blade has high efficiency and structural safety through both aerodynamic and structural analysis and experimental test of a prototype propeller blade.