• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.1
• /
• pp.50-59
• /
• 1997

Shipbuilder checks the status of main engine and propeller operation before sea trial. Generally these tests are carried out at a quay during fitting out of the ship. For these tests the operator has to estimate the maximum RPM with permissible torque and thrust to ensure the safety of the mooring line and ship. In this paper, the propeller characteristics according to the draft variation for a moored ship is inveatigated. From these tests, it is shown that shaft submergence is a dominant parameter in the propeller performance at shallow shaft submergence and that the propeller performance is dependent upon the propeller RPM when the shaft submergence is kept unchanged. In this study, a simple formula of the required thrust for a given propeller shaft submergence and propeller RPM is derived. 1be propeller thrust, which is calculated by another formula in case of dtep draft, is compared with results of bollard pull test for FPSO.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.4
• /
• pp.264-272
• /
• 2011

Shipbuilders carry out the operation test to check the conditions of the main propulsion system and auxiliaries for moored vessel in the quoy before the sea trial. The estimation of the thrust and torque for the partially submerged propeller should be prepared to ensure the safety of mooring line and the ship. In this paper, the variations of the thrust and torque according to the shaft submergence and the propeller rotating speed in bollard pull condition are investigated with the model test and the numerical analysis. Based on these resaearch, the empirical formula representing the physical phenomena of the partially submerged propeller is derived and validated through comparison to measurement results of full-scale propellers under the quoy operation test.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.25-27
• /
• 2014

황천 운항 중인 선박은 파도에 의한 과도한 운동과 그로 인한 슬래밍, 프로펠러노출, 갑판침수와 같은 현상으로 구조, 화물, 인명에 위험을 초래할 수 있다. 이 때문에 황천 시 선박은 안전 운항을 위하여 속도와 코스를 신중히 결정할 필요가 있다. 선박 운동 모니터링 시스템은 해상환경이 선박에 미치는 다양한 위험 상황을 사전에 예측하고 피할 수 있도록 의사 결정을 지원하며, 현재 선박의 운동상태와 구조적 안정성을 지속적으로 모니터링 함으로써 선박, 선원, 화물의 안전을 지원할 수 있도록 개발되었다. 본 시스템은 주파수 영역에서 New strip 방법에 기초하여 운동 응답과 수직 굽힘 모멘트를 계산하며, 슬래밍, 프로펠러노출, 갑판침수를 예측한다. 또한 선박 운동과 선체구조응력을 실시간으로 모니터링하여 과도한 선체운동이나 선체구조피로 등의 위험 상황을 표시하고 선원의 작업성과 승선감의 지표인 MII (Motion induced interruption), MSI (Motion sickness incidence)를 제공한다.

• Journal of Power System Engineering
• /
• v.11 no.1
• /
• pp.98-106
• /
• 2007

This paper presents a statistical prediction procedure for the propeller racing of ships with twin screw propellers sailing in ocean waves. The propeller racing is one of the most important factors of seakeeping qualities in relation to the safety of main engine and shafting system. It is especially significant key word for designing the twin-screw-propeller-type ship in view of allowable maximum propeller diameter etc.. In former studies, the propeller racing generally means the situation (propeller exposed) in which the relative motion amplitude between ship hull and wave surface would exceed a depth of point in rotary disk propeller. Therefore, it seems that the magnitude of the amplitude and its exceeding frequency have been examined as a principal subject of study as usual. However, the time during which the amplitude exceeds a depth of point must be also one of most important factor affecting the trend of propeller racing. This paper proposes a simply practical method for estimating the time lasting of exposed propeller related to twin screw propeller racing in rough confused seas on the basis of the statistics. Then, it is confirmed that the practical method is useful and convenience for considering the propeller racing in the stage of the basic design.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.16-20
• /
• 2003

Recently, The fast change of fishing boat fishery surrounding environment is connected by request of fan shape development that meet in restructuring of existing fishing boat fishery and new community, economical surrounding. In southern sea district along the coast work and district along the coast fishing bats that sail to exposed propeller fishing net, rope etc.. cold real condition that accident is increasing every year. This study is thing which analyze main performance of minuteness water jet type district along the coast fishing boat through model examination to propeller protection tunnel sticking district along the coast fishing boat that correct existing stem shape for marine accident prevention of district along the coast fishing boat in viewpoint such as ideal and examines.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.06a
• /
• pp.1-3
• /
• 1996

수중 트랜스듀서는 진동하는 물체위에 설치되어 다양한 외부 소음원이 유입되는 환경에 노출되어 있다. 외부 소음원으로는 선체 진동. 프로펠러 소음, 그리고 유동 유기 소음들을 들 수 있고, 트랜스듀서의 실제 작동시 이들의 레벨이 상당히 높아서 센서의 정확한 작동에 장애가 되고 있다. 본 논문에서는 외부 소음원에 무관한 고 정밀, 저 소음 특성을 지닌 음향센서를 개발하기 위하여 유한요소법 (FEN)을 사용하여 소음 전달 특성을 분석하고, air pocket과 음향 감쇠층의 다양한 조합으로 이루어진 구조를 개선한 음향센서의 설계 및 내소음성 평가를 하였다. 또한 사용한 음향 감쇠층의 최적 물성을 제시하고자 한다. 그 결과 센서 측면 하단부에 소음원이 위치할 경우 가장 큰 잡음 신호로 작용하며, 구조를 변경한 결과 기존 음향센서에 비해 55% 이상 내 소음성을 증진 시켰다. 그리고 음향 감쇠층의 최적 음향 임피던슨는 1 Mrayl 이하 혹은 4mrayl 이상으로 분석되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1083-1090
• /
• 2012

Copper alloys are widely used for casting materials including ship's propellers and pump impellers as they provide high corrosion resistance. In addition, the demand for these alloys is increasing with rapid growth of offshore structures and exploitation of various substitute energy sources. However, they require regular maintenance because of erosion and cavitation damages induced by exposure to marine environment at high speed flows for a long period of time. Water cavitation peening have received attention as one of surface modifications for durability improvement of the copper alloys. This is a environment friendly technology without influence of heat and easily applicable to casting materials. In this research, water cavitation peening was employed in distilled water for copper alloy castings as a function of time and evaluation of corrosion resistance was followed in seawater for the modified surface by using electrochemical methods. The result suggests that the water cavitation peening for 2 minutes was found to be the optimal peening parameter in terms of durability and corrosion resistance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1257-1263
• /
• 2010

The naval structure exposes to environmental vibration of shafted propeller propulsion and engine vibration. The shipboard equipments are developed compliance to MIL-STD-167-1A. For this purpose, vibration fatigue life of shipboard equipment for long lives should be estimate via an analytical approach and vibration test. In this paper, High cycle fatigue strength of cast aluminum alloy A356 using shipboard equipment was evaluated by 14 S-N method. The stress applied on the structure is evaluated by an analytical method(frequency response analysis with sinusoidal input and a fatigue evaluation) to simulate a MIL-STD-167-1A test. The frequency with the maximum equivalent stress is shown by Max. test frequency and the vibration fatigue life of shipboard equipment was estimated by Miner's rule.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2
• /
• pp.10-15
• /
• 1997

The hydrophones is mounted in many applications on a vibrating surface and functions as an underwater acoustic signal receiver without sensing the vibrations from the mounting surface. However, their performance is usually degraded by the interference of exterior noises such as acoustic cavitation in water stream, host structural vibration in the hull, and propeller motions. This paper describes the design and evaluation of a self noise suppressing hydrophones which shows very poor sensitivity to the external noises, first, effects of the external noise on the its receiver performance is simulated with finite element method(FEM). Second, the geometrical variations are implemented on the original structure that include additional air pockets and acoustic walls which work as acoustic shied or scatter of the noises. The results show that the effect of the external noise is the most significant when it is applied near to the bottom of the side wall of the hydrophones. The transverse noise induced by the outside water flow is isolated most effectively when a thin compliant (damping) layer combined with two air pockets is inserted to the circumference of the nose. Noise level is reduced about fifty nine percent of that of the original structure.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.106-106
• /
• 2018

해양환경용 선박재료는 전기화학적인 부식을 발생시키는 염소이온($Cl^-$)이 다량 포함된 부식 환경에 장기간 노출되어 있어 부식에 대해 취약하다. 따라서 우수한 내식성 및 내침식성을 가진 재료를 선정하는 것은 매우 중요하다. 알루미늄 합금은 충분한 강도와 부동태 피막 형성으로 인해 내식성이 우수하여 해양환경용 선박 재료로서 널리 이용되고 있으며, 이에 따른 부식 특성에 관한 연구도 활발히 이뤄지고 있다. 그러나 선박에서는 부식에 의한 손상뿐만 아니라 전식에 의한 부식 손상도 발생할 수 있다. 특히 선미 부분은 프로펠러의 동합금과 알루미늄 합금의 이종금속 간 전위차에 의한 전식이 발생하여 선체의 다른 부위에 비해 부식이 더 심하게 진행될 수도 있다. 또한 전식은 해안 부두에 접안된 선박의 용접 시미주전류(stray current)에 의한 부식손상이 발생할 수 있으나 이에 대한 연구는 미미한 실정이다. 따라서 본 연구는 해양환경에서의 전식을 인위적으로 모사할 수 있는 부식 정전류 시험법을 이용하여 다양한 크기의 전식 손상을 유발시켰으며, 해양환경 하에서 선박재료로 주로 사용되는 알루미늄 합금인 Al5083-H321, Al5052-O, Al6061-T6에 대한 전식 특성을 비교, 분석하였다. 실험 방법으로 작동전극은 각 재료의 시험편을 $2cm{\times}2cm$ 으로 절단하여 sand paper # 2000 번까지 연마 후 아세톤과 증류수로 세척하고 건조하였으며, 제작된 시험편은 자체 제작한 홀더를 이용하여 $1cm^2$만 노출시킨 후 정전류 가속 실험을 실시하였다. 기준전극은 은/염화은(Ag/AgCl) 전극을, 대응전극은 백금(Pt) 전극을 사용하였다. 정전류 가속 조건은 $0.001mA/cm^2$, $0.1mA/cm^2$, $1mA/cm^2$, $5mA/cm^2$, $10mA/cm^2$의 전류 밀도를 천연해수에서 30분간 인가하였다. 각 재료에 대한 전식 특성은 실험 전후의 무게 감소량으로 전식의 저항 특성을 확인하였다. 그리고 3D 현미경으로 표면 손상 경향과 깊이를 측정하였으며, 주사전자현미경 (SEM)을 통해 표면 형상을 미시적으로 관찰하였다. 부식 정전류 시험 결과 모든 시편에서 $0.01mA/cm^2$에서 미세한 국부적인 부식이 일어났으며, 전류밀도가 증가할수록 표면 전반에 부식이 진행되고 성장하였다. 그리고 모든 인가 전류밀도의 조건에서 Al6061-T6가 5000계열(Al5083-H321, Al5052-O)보다 더 우수한 내식성을 나타났다.