• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.6
• /
• pp.703-709
• /
• 2014

In the AMP(Asymmetric Multiprocessing) based dual core using core-specific operating system in a single processor system, shared memory method is used to send data between processors in dual core. To used shared memory in different operating systems, there is a problem of needing to solving the issue of message communication and synchronization between the two operations systems. In this paper, separate memory controller was used for data sharing between different processor cores in dual core environment. This controller can designate two slave ports to allow simultaneous access from two processors, and in the case of process data simultaneously by two processors, priority order of slave ports is determined through memory mediator. When sending data from A to B processor, SRAM area was logically separated into 8 pages. It allowed using memory area from multiple processes with the size of 4KByte per page, and control register with the size of 4Byte was used to discern the usability of current page.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2012

Improving operating frequency of processors is no longer today's issues; a multiprocessor technique which integrates many processors has received increasing attention. Currently, high-performance processors that integrate 64 or 128 cores are developing for large data processing over 2, 4, or 8 processor cores. This paper proposes an optimal many-core processor for synthesizing guitar sounds. Unlike the previous research in which a processing element (PE) was assigned to support one of guitar strings, this paper evaluates the impacts of mapping different numbers of PEs to one guitar string in terms of performance and both area and energy efficiencies using architectural and workload simulations. Experimental results show that the maximum area energy efficiencies were achieved at PEs=24 and 96, respectively, for synthesizing guitar sounds with sampling rate of 44.1kHz and 16-bit quantization. The synthesized sounds were very similar to original guitar sounds in their spectra. In addition, the proposed many-core processor was 1,235 and 22 times better than TI TMS320C6416 in area and energy efficiencies, respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.1-10
• /
• 2014

This paper proposes a scheduling scheme that enhances power consumption efficiency of periodic real-time tasks using DVFS and power-shut-down mechanisms while meeting their deadlines on multicore processors. The proposed scheme is suitable for dependent multicore processors in which processing cores have an identical speed at an instant, and resolves the load unbalance of processing cores by exploiting parallel processing because the load unbalance causes inefficient power consumption in previous methods. Also the scheme activates a part of processing cores and turns off the power of unused cores. The number of activated processing cores is determined through mathematical analysis. Evaluation experiments show that the proposed scheme saves up to 77% power consumption of the previous method.

• The KIPS Transactions:PartA
• /
• v.19A no.2
• /
• pp.77-84
• /
• 2012

Speculative execution for improving instruction-level parallelism is widely used in high-performance processors. In the speculative execution technique, the most important factor is the accuracy of branch predictor. Unfortunately, complex branch predictors for improving the accuracy can cause serious thermal problems in 3D multicore processors. Thermal problems have negative impact on the processor performance. This paper analyzes two methods to solve the thermal problems in the branch predictor of 3D multi-core processors. First method is dynamic thermal management which turns off the execution of the branch predictor when the temperature of the branch predictor exceeds the threshold. Second method is thermal-aware branch predictor placement policy by considering each layer's temperature in 3D multi-core processors. According to our evaluation, the branch predictor placement policy shows that average temperature is $87.69^{\circ}C$, and average maximum temperature gradient is $11.17^{\circ}C$. And, dynamic thermal management shows that average temperature is $89.64^{\circ}C$ and average maximum temperature gradient is $17.62^{\circ}C$. Proposed branch predictor placement policy has superior thermal efficiency than the dynamic thermal management. In the perspective of performance, the proposed branch predictor placement policy degrades the performance by 3.61%, while the dynamic thermal management degrades the performance by 27.66%.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.11-20
• /
• 2011

In this paper, we propose an optimal scheduling scheme that minimizes the energy consumption of a real-time video task on the multi-core platform supporting dynamic voltage and frequency scaling. Exploiting parallel execution on multiple cores for less energy consumption, the propose scheme allocates an appropriate number of cores to the task execution, turns off the power of unused cores, and assigns the lowest clock frequency meeting the deadline. Our experiments show that the proposed scheme saves a significant amount of energy, up to 67% and 89% of energy consumed by two previous methods that execute the task on a single core and on all cores respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.135-141
• /
• 2020

Today, CPUs in general-purpose computers such as servers, desktops and laptops, as well as home appliances and embedded systems, consist mostly of multicore processors. In order to improve performance, it is required to use an out-of-order execution processor by Tomasulo algorithm as each core processor. An out-of-order execution processor with Tomasulo algorithm can execute the available instructions in any order and perform speculation in order to reduce control dependencies. Therefore, the performance of an out-of-order execution processor can be significantly improved compared to an in-order execution processor. In this paper, an out-of-order execution processor using Tomasulo algorithm and ARM instruction set is designed using VHDL record data types and simulated by GHDL. As a result, it is possible to successfully perform operations on programs written in ARM instructions.

• Electronics and Telecommunications Trends
• /
• v.24 no.6
• /
• pp.86-93
• /
• 2009

프로세서는 더 이상 동작 주파수를 높이는 방법이 아닌 다수의 프로세서를 집적하는 멀티프로세서로 기술 발전이 이루어지고 있다. 최근 2, 4, 8개의 프로세서 코어를 넘어 64, 128개 이상의 프로세서를 집적한 대규모 데이터 처리 및 과학 연산용 고성능 프로세서들이 개발되고 있다. 본 문서는 이러한 병렬 프로세싱의 개념 및 병렬 프로세서의 기술을 정리하고 최근 동향과 함께 당면한 문제점들을 기술한다.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.17-22
• /
• 2009

DaVinci processors are popular media processors for implementing embedded multimedia applications. They support dual core architecture: ARM9 core for video I/O handling as well as system management and peripheral handling, and DSP C64+ core for effective digital signal processing. In this paper, we propose our efforts for optimal implementation of object tracking algorithm in DaVinci-based smart camera which is being designed and implemented by our laboratory. The smart camera in this paper is supposed to support object detection, object tracking, object classification and detection of intrusion into surveillance regions and sending the detection event to remote clients using IP protocol. Object tracking algorithm is computationally expensive since it needs to process several procedures such as foreground mask extraction, foreground mask correction, connected component labeling, blob region calculation, object prediction, and etc. which require large amount of computation times. Thus, if it is not implemented optimally in Davinci-based processors, one cannot expect real-time performance of the smart camera.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10C
• /
• pp.1042-1050
• /
• 2007

This paper describes the system which automatically generates power-minimized embedded cores from MDL descriptions. An automatic generation system is constructed which generated embedded cores which consumes less power for application programs. From the usage information on pipeline stages for each instruction, the proposed system generates embedded cores with the capability of detecting/resolving pipeline hazards. The generated cores are configured such that the power consumption is minimized. The proposed system has been tested by generating HDL codes for ARM9, MIPS R3000 architectures. Experimental results show functional accuracy of the generated cores, and show that power reduction of $20%{\sim}40%$ has been observed for benchmark programs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.321-324
• /
• 2010

There have been lots of researches on a multi-core processor. The enhancement has been performed through parallelization method. Multi-core architecture in the mobile environment has emerged. But, there is a limit to a mobile CPU's performance. GP-GPU(General-Purpose computing on Graphics Processing Units) can improve performance without adding other dedicated hardware. This paper presents the implementation of Inverse Quantization, Inverse DCT and Color Space Conversion module in H.264/AVC decoder using Multi-Core GP-GPU for a mobile environments. The proposed architecture improves approximately 50% of performance when it use all the features.