• 한국ITS학회:학술대회논문집
• /
• 2005.11a
• /
• pp.209-214
• /
• 2005

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2C
• /
• pp.125-131
• /
• 2008

Ground stiffness(shear wave velocity) is one of the key parameters in geotechnical earthquake engineering. An In-situ seismic technique has its own advantages and disadvantages over the others in stiffness measurements. By combining the crosshole and seismic cone techniques and utilizing favourable features of bender elements, a new hybrid probe has been developed in order to enhance data quality and easiness of testing. The basic structure of the probe, called "MudFork" is a fork composed of two blades, on each of which source and receiver bender elements were mounted respectively. To evaluate the disturbance caused by the penetration of the probe, shear wave velocity measurements were carried out in the Kaolinite slurry in the laboratory. Finally, the probe was penetrated in coastal mud near Incheon, Korea, using SPT(standard penetration test)rods pushed with a routine boring machine and shear wave velocity measurements were carried out. The results were verified with data from laboratory and cone testing. The performance of the probe turns out to be excellent in terms of data quality and testing convenience.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.67-77
• /
• 2004

A treatment of outlier has been discussed. Outliers disrupt the reliability of information systems and they should be eliminated prior to the information and/or data fusion. A time series-based elimination algorithm were proposed and prediction interval, as a criterion of acceptable value width, was obtained with the model. Ten actual link values were used and the best model was identified as IMA(1,1). Although the actual verification was difficult in a sense that the matching process between the eliminated data and model data was not readily available, the proposed model can be successfully used in practice with some calibration efforts.

• Journal of the KSME
• /
• v.34 no.9
• /
• pp.705-710
• /
• 1994

열.유체유동 중 난류에 대한 유동현상은 매우 광범위한 영역에서 나타나기 때문에 그 응용성이 매우 크게 작용되어 상업용 설비, 항공기, 자동차, 연소기 및 각종 스포츠 등에 이르기까지 넓게 적용되고 있다. 본 계측법은 특히 기하학적 형상에 좌우되지 않는 범용데이터 처리와 결부시켜 이용하는 것으로 최근 컴퓨터의 보급이 활발히 정착됨에 따라 보다 정확한 방법으로 난류의 정량적인 자료와 정성적인 난류구조를 계측하기 위하여 컴퓨터와 온라인으로 연결한 열선한 열 선유속계의출력을 통계해석에 의해 분석하는 방법이 시도되고 있는 것이다. 끝으로 이 글에서 언급한 삼축 열선 프로브는 프로브의 제작에 대한 고도의 기술과 프로브의 겁사체적을 되도록 작게 해야 하는 과제를 안고 있으며, 이러한 문제들은 제작기술의 발달로 점차 해결되고 있으며 적용대상이 크기 때문에 앞으로 많이 이용 될 것으로 기대되는 바이다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.2
• /
• pp.133-141
• /
• 2021

The probe vehicle penetration rate is a required parameter in the estimation of entire volume, density, and queue length from probe vehicle data. The previous studies have proposed estimation methods without point detectors, which are based on probability structures for the locations of probe and non-probe vehicles; however, such methods are poorly suited to the case of multi-lane streets. Therefore, this study aimed to estimate the probe vehicle penetration rate at a multi-lane intersection and introduce a probability distribution of the queue length of each lane. Although a gap between estimates and observations was found, the estimates followed the trend of observations; the estimation could be improved by the correction factor hereafter. This study is expected to be used as a basic study for the estimation of entire volume, density, and queue length at multi-lane intersections without point detectors.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.173-184
• /
• 2018

As the portable traffic information collection system using probe vehicles spreads, it is becoming possible to collect road hazard information such as portholes, falling objects, and road surface freezing using in-vehicle sensors in addition to existing traffic information. In this study, we developed a integration and decision algorithm that integrates time and space in real time when multiple probe vehicles detect events such as road hazard information based on GPS coordinates. The core function of the algorithm is to determine whether the road hazard information generated at a specific point is the same point from the result of detecting multiple GPS probes with different GPS coordinates, Generating the data, (3) continuously determining whether the generated event data is valid, and (4) ending the event when the road hazard situation ends. For this purpose, the road risk information collected by the probe vehicle was processed in real time to achieve the conditional probability, and the validity of the event was verified by continuously updating the road risk information collected by the probe vehicle. It is considered that the developed hybrid processing algorithm can be applied to probe-based traffic information collection and event information processing such as C-ITS and autonomous driving car in the future.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2004.11a
• /
• pp.21-28
• /
• 2004

모든 생명체의 genetic information에는 보존적 염기서열과 다형적 염기서열이 존재한다. 다형적 염기서열과 보존적 염기서열은 하나의 종(species)을 감별하거나, 여러 종류의 종을 동시에 감별할 수 있는 genotyping의 표지자로 각각 이용될 수 있다. 본 논문은 병원성 감염질환 세균, 식중독 유발 세균, 생물의약품 오염 유발 세균 및 환경오염 세균 등 세균의 존재 유무와 속과 종 감별을 위해 대부분 세균 종의 보존적 염기서열과 다형적인 염기서열을 포함하고 있는 23S rDNA 유전자의 표적 염기 서열로부터 고안된 세균 특이적(bacterial-specific), 속 특이적(genus-specific), 종 특이적(species-specific) 올리고 뉴클레오티드프로브와 프라이머를 디자인하는 시스템을 소개한다. 시스템을 통해서 얻어진 프로브와 프라이머들은 PCR을 통한 검증단계를 거쳐서 디자인 결과의 정확성을 확인하였다. 본 시스템의 이용으로 프로브와 프라이머를 디자인하는데 몇 주가 소요되는 시간을 몇 일 내로 줄일 수 있었으며, 체계적인 데이터의 관리로 결과의 정확성을 높일 수 있었다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.183-193
• /
• 2019

This study developed a shockwave detection and prediction of their extinction point method based on continuous wavelet transform using trajectory data from probe vehicles equipped with automotive sensors.. To analyze the effectiveness of the proposed method, this paper proposed two measures which are a distance error between the extinction points of the predictor and an time-location error of the extinction points. The proposed concept was proved using the micro simulation based experiment with three exogenous variables of traffic volume, lane-close duration, market penetration of probe vehicles. The analysis results show that the proposed method is capable of detecting the traffic shockwaves as well as predicting their extinction point, and also that the accuracy of the proposed method is highly dependent on the rate of the probe vehicles.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.29-41
• /
• 2017

In this study, we used individual trip data to estimate a macroscopic fundamental diagram (MFD) that relates flow (or production) to density (or state) in Daegu metropolitan city. The individual trip data were generated by processing data that were collected from DSRC-based (dedicated short range communication) traffic data collection system. Using the processed individual trip data, we first examined whether the assumptions for MFD are valid, and then the relation between outflow and accumulation was estimated in our study site. As a result, we found that i) the assumptions are valid to construct MFD; and ii) the reproducible and well-defined MFDs exist in the network level.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.1
• /
• pp.79-88
• /
• 2018

With the increasing popularity of electronic toll collection system using 5.8 GHz dedicated short-range communications (DSRC) technology, DSRC-based travel-time collection systems have been deployed on major urban and rural arterial routes in Korea. However, since probe sample sizes are frequently insufficient in probe-based systems, the gathered travel times from probe vehicles fluctuate significantly compared to those of the population; as a result, the accuracy of the collected travel times could decrease. To mitigate the fluctuations (also known as biases), smoothing techniques need to be applied. In this study, some smoothing techniques-moving average, the Loess, and Savitzky-Golay filtering-were applied to probe travel times. Resultantly, the error in the smoothed travel times at the lowest sampling plan (5%) decreased as much as 45% compared to those in non-smoothed travel times. The results of this study can be practically applied to probe-based travel-time estimation systems for providing reliable travel times along the travel corridor.