• Title/Summary/Keyword: 프로그램 모듈

Search Result 967, Processing Time 0.036 seconds

Analysis FIPS 140-2 DTR(Derived Test Requirement of FIPS 140-2 of CMVP(Cryptographic Module Validation Program) (암호화 모듈 평가 프로그램(CMVP) 표준인 Derived Test Requirement(DTR) of FIPS 140-2 분석)

  • 이병석;정성민;박성근;김석우;박일환
    • Proceedings of the Korea Institutes of Information Security and Cryptology Conference
    • /
    • 2003.12a
    • /
    • pp.311-316
    • /
    • 2003
  • 정보통신기술의 발달로 대부분 사회의 기반구조가 사이버 사회로 전환되었고 다양한 형태의 경제사회 활동을 수행키 위해 정보보호제품의 활용이 극대화되었으며 더욱 중요시되었다. 이러한 사회흐름에 기반하여 정보보호제품의 안전한 선택 및 사용을 위한 기본적 선택기준은 검증받은 암호화 모듈을 바탕으로 하는 정보보호제품에 대한 신뢰 기관의 안전성 평가 결과일 것이다. 암호화 모듈에 대한 안전성 평가로 가장 널리 참조되는 것은 미국의 NIST(National Institute of Standards and Technology)가 수행하는 CMVP(Cryptographic Module Validation Program)이며, 세계적으로 인정받고 있다. 본 논문에서는 암호 모듈의 평가체계에 대해 설명하였으며 그 기준인 FIPS 140-2 DTR을 분석하여 향후 개발 가능한 CMVP의 안전성 평가 툴 기준에 대해 제시하였다.

  • PDF

A study on domestic and foreign policy trends of CMVP (국내외 CMVP 정책 동향에 관한 연구)

  • Choi, Myeong-Gil;Jeong, Jae-Hun
    • Proceedings of the KAIS Fall Conference
    • /
    • 2010.05a
    • /
    • pp.471-474
    • /
    • 2010
  • 정보통신분야의 발전으로 인해 익명성의 사이버 사회가 도달하였고 해킹과 같은 역기능이 많이 발생함에 따라 정보보호를 위해 암호모듈에 대한 수요가 급증하고 있다. 하지만 국내에서는 암호모듈에 대한 평가 기준 정립이 미흡하여 수요자가 모듈 선택 시 어려움이 있고, 모듈 및 제품 상호간의 운용 및 호환성 확보에 어려움이 있다. 본 논문은 정보보호 제품에 대한 안전성을 평가해 제품의 신뢰성을 높이고, 기술의 향상을 유도하는 국외의 정보보호 제품에 대한 평가 프로그램인 CMVP의 현황을 살펴본다. 이를 통해 다가오는 국제 표준에 대비하여, 국내 정보보호 제품 보호와 기술보호를 위해 선진외국의 제도, 기술, 현황분석 및 국제 암호제도 공조체계 구축을 위한 기반을 제공코자 한다.

  • PDF

Design and Implementation of Embedded Ethernet Module (임베디드 이더넷 모듈의 설계 및 구현)

  • Kim, Yung-Jin
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.12 no.4
    • /
    • pp.636-642
    • /
    • 2008
  • Upon the changes of human life style due to the distribution of ultra-high speed internet services and the development of high-tech information equipment, the idea of necessity fer home networking has been widely accepted. Thus, "embedded ethernet module" was designed in this paper for the stabilization of home networking by using 8051 MCU, Hardwired TCP/IP (W3150A). By executing remote software on established simple web-server on the target machine, controlling electric equipment became available elsewhere. With this module, establishing a low-cost home automations system would become possible in a ubiquitous society.

Design and Implementation of an Embedded Linux-based Mobile EPD Display-module Testing Device (임베디드 리눅스 기반의 휴대형 EPD 디스플레이 검사장치 설계 및 구현)

  • Nam, Young-Jin;Lee, Jong-Tae;Park, Young-Kyun;Kim, Jung-Mok;Kim, Eung-Ryul
    • Annual Conference of KIPS
    • /
    • 2010.11a
    • /
    • pp.1621-1624
    • /
    • 2010
  • 디스플레이 모듈 검사 장치는 디스플레이 모듈 제조공정 및 품질보증부서에서 주로 사용되며, 디스플레이 모듈의 불량유무를 확인하여 디스플레이 출하 제품의 품질을 높이는 장비이다. 기존의 검사장비는 부피가 크고 별도의 프로그램을 통하여 PC에서 제어하는 형태로 되어 사용이 불편하고 휴대가 어려운 문제가 있다. 이러한 문제를 해결하기 위하여 본 논문에서는 소형 휴대형 디스플레이 모듈 검사 장치를 설계 및 구현하였다. 설정데이터 전송 및 1600*1200크기의 EPD 디스플레이에 JPEG/BMP정지영상을 출력하여 BMP재현함으로 검사기기의 성능을 검증하였다.

Study of On-line Performance Diagnostic Program of A Helicopter Turboshaft Engine (헬리콥터 터보축 엔진의 온라인 상태진단 프로그램 연구)

  • Kong, Chang-Duk;Koo, Young-Ju;Kho, Seong-Hee;Ryu, Hyeok
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.37 no.12
    • /
    • pp.1238-1244
    • /
    • 2009
  • This work proposes a GUI-type on-line diagnostic program using SIMULINK and Fuzzy-Neuro algorithms for a helicopter turboshaft engine. During development of the diagnostic program, a look-up table type base performance module for reducing computer calculating time and a signal generation module for simulating real time performance data are used. This program is composed of the on-line condition monitoring program to monitor on-line measuring performance condition, the fuzzy inference system to isolate the faults from measuring data and the neural network to quantify the isolated faults. The reliability and capability of the proposed on-line diagnostic program were confirmed through application to the helicopter engine health monitoring.

Three-dimensional finite element static analysis and safety evaluation of attachable roadside barriers on bridges (탈·부착식 교량 방호울타리의 3차원 유한요소 정적해석 및 안전성 평가)

  • Lee, Sang-Youl
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.15 no.4
    • /
    • pp.2414-2418
    • /
    • 2014
  • This study carried out three-dimensional finite element analysis and structural safety evaluation of attachable roadside barriers. The effects of diaphragm distance and the number of bolts on displacements and maximum stresses for various parameters are studied using the LS-DYNA finite element program for this study. In this study, the existing finite element analysis of barriers using the LS-DYNA program is further extended to study static behaviors and structural safety of the barrier with module structures connected by anchor bolt inserted through concrete bridge decks. The numerical results for six parameters are verified by comparing different models with displacements and stress distribution occurred in the barrier and shows good structural performance.

Standardized Description Method of Image Acquisition Characteristics Tests for Image Sensors and Modules (이미지 센서 및 모듈의 영상 취득 테스트를 위한 표준화된 기술 방법)

  • Lee, Seongsoo
    • Journal of IKEEE
    • /
    • v.18 no.1
    • /
    • pp.64-76
    • /
    • 2014
  • In the image acquisition tests of image sensors and modules, how to compare pixel values, how to digitize "defect", and how to determine "fault" are extremely varied from test equipments. Therefore, setup of test equipments for image acquisition characteristics should be customized for target devices under test. In general, test procedures are delivered as technical documents in not standardized but arbitrary formats. So test equipment should be manually programmed fitting individual setup condition. This costs huge time and effort and has high risk of human error. In this paper, the standardized description method is proposed to apply to almost all existing tests where various tests are described in a single framework.

An Experimental Study of Private Key and Secret Key Disclosure Vulnerability in Cryptographic Service Provider(CSP) Module (Cryptographic Service Provider(CSP) 모듈의 개인키/비밀키 노출 취약점에 대한 실험적 연구)

  • Park, Jin-Ho;Cho, Jae-Ik;Im, Eul-Gyu
    • Convergence Security Journal
    • /
    • v.7 no.3
    • /
    • pp.61-70
    • /
    • 2007
  • In Windows operating system, CSPs(Cryptographic Service Providers) are provided for offering a easy and convenient way of using an various cryptographic algorithms to applications. The applications selectively communicate with various CSPs through a set of functions known as the Crypto API(Cryptographic Application Program Interface). During this process, a secure method, accessing data using a handle, is used in order to prevent analysis of the passing parameters to function between CryptoAPI and CSPs. In this paper, our experiment which is using a novel memory traceback method proves that still there is a vulnerability of private key and secret key disclosure in spite of the secure method above-mentioned.

  • PDF

Design and Implementation of Auto Set-up Program for SFP Module by using VEE (VEE를 이용한 SFP 모듈 자동 설정 프로그램 설계 및 개발)

  • Choi, Jeoung-Hoon;Jun, Byung-Uk;Koo, Yong-Wan
    • Journal of Internet Computing and Services
    • /
    • v.8 no.2
    • /
    • pp.67-76
    • /
    • 2007
  • Data used for the SFP module are stored in A0 and A2 memory area based on the SFP-MSA standard. In this paper the auto set-up program for SFP module has been designed and implemented. In order to make the Digital Diagnostic Monitoring Interface, the specific value has been written into the designated register via RS232 communication channel in the LD Driver IC. The Agilent VEE is used as a programming language for factory automation, and optical characteristics of SFP module and SFP-MSA standard are main structure of the implementation. The implemented program has been applied to the manufacturing field and the system gains a higher effect than the result of 6-Sigma.

  • PDF

Design and Implementation of USB Module for Foot Switch (풋 스위치용 USB 모듈 설계 및 구현)

  • Lee, Jong-Hyeok
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.14 no.8
    • /
    • pp.1849-1854
    • /
    • 2010
  • As for information system in hospital which digital hospital aims at, there are PACS(Picture Archiving and Communication System) and soon. PACS transfer and store various medical pictures which are occurring in hospital. The various medical pictures is captured by using keyboard or foot switch during a surgical operation. In this paper, foot switch USB module that can be mounted into a main foot switch case is designed and implemented, it is having a MCU circuit with a built-in micro-controller and a I/O interface having a maximum of five switch. we also developed foot switch control software program with various functions. The result of using the module in the hospital field confirms that the module operates safely.