• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.5
• /
• pp.54-60
• /
• 2017

In order to identify the characteristics of the flame transfer function gain, cold-flow transfer function was introduced, which is the part of the combustion instability research. Nitrogen and carbon dioxide was used to obtain the cold-flow transfer function and input/output variables was measured by hot wire anemometry. Density and fluid flow rate affect the cold-flow transfer function gain and peak frequency. In addition, acoustic resonance frequency affects the peak frequency of gain in the fuel feeding line.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.5
• /
• pp.100-108
• /
• 2012

The purpose of the study was to evaluate the influence of shading and ventilation on Mean Radiant Temperature(MRT) of the outdoor space at a summer outdoor. The Wind Speed(WS), Air Temperature(AT) and Globe Temperature(GT) were recorded every minute from $1^{st}$ of May to the $30^{th}$ of September 2011 at a height of 1.2m above in four experimental plots with different shading and ventilating conditions, with a measuring system consisting of a vane type anemometer(Barini Design's BDTH), Resistance Temperature Detector(RTD, Pt-100), standard black globe(${\O}$ 150mm) and data acquisition systems(National Instrument's Labview and Compfile Techs' Moacon). To implement four different ventilating and shading conditions, three hexahedral steel frames, and one natural plot were established in the open grass field. Two of the steel frames had a dimension of $3m(W){\times}3m(L){\times}1.5m(H)$ and every vertical side covered with transparent polyethylene film to prevent lateral ventilation(Ventilation Blocking Plot: VP), and an additional shading curtain was applied on the top side of a frame(Shading and Ventilation Blocking Plot: SVP). The third was $1.5m(W){\times}1.5m(L){\times}1.5m(H)$, only the top side of which was covered by the shading curtain without the lateral film(Shading Plot: SP). The last plot was natural condition without any kind of shading and wind blocking material(Natural Open Plot: NP). Based on the 13,262 records of 44 sunny days, the time serial difference of AT and GT for 24 hour were analyzed and compared, and statistical analysis was done based on the 7,172 records of daytime period from 7 A.M. to 8 P.M., while the relation between the MRT and solar radiation and wind speed was analyzed based on the records of the hottest period from 11 A.M. to 4 P.M.. The major findings were as follows: 1. The peak AT was $40.8^{\circ}C$ at VP and $35.6^{\circ}C$ at SP showing the difference about $5^{\circ}C$, but the difference of average AT was very small within${\pm}1^{\circ}C$. 2. The difference of the peak GT was $12^{\circ}C$ showing $52.5^{\circ}C$ at VP and $40.6^{\circ}C$ at SP, while the gap of average GT between the two plots was $6^{\circ}C$. Comparing all four plots including NP and SVP, it can be said that the shading decrease $6^{\circ}C$ GT while the wind blocking increase $3^{\circ}C$ GT. 3. According to the calculated MRT, the shading has a cooling effect in reducing a maximum of $13^{\circ}C$ and average $9^{\circ}C$ MRT, while the wind blocking has heating effect of increasing average $3^{\circ}C$ MRT. In other words, the MRT of the shaded area with natural ventilation could be cooler than the wind blocking the sunny site to about $16^{\circ}C$ MRT maximum. 4. The regression and correlation tests showed that the shading is more important than the ventilation in reducing the MRT, while both of them do an important role in improving the outdoor thermal comfort. In summary, the results of this study showed that the shade is the first and the ventilation is the second important factor in terms of improving outdoor thermal comfort in summer daylight hours. Therefore, it can be apparently said that the more shade by the forest, shading trees etc., the more effective in conditioning the microclimate of an outdoor space reducing the useless or even harmful heat energy for human activities. Furthermore, the delicately designed wind corridor or outdoor ventilation system can improve even the thermal environment of urban area.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1068-1071
• /
• 2009

현재 한강수계의 화천댐 상류, 임진강 상류지역의 상당부분이 북한에 속해있다. 따라서, 장기유출모의 수행을 위한 기본입력자료인 수문기상자료 및 수치주제도(토지이용, 토양)의 활용에 있어 미계측 유역으로 간주되어 왔다. 그러나, 전세계 기상통신망(GTS: Global Telecommunication System)을 통해 수문기상자료(강수량, 기온, 습도, 풍속 등)는 기상청에서 제공되고 있으며, 국제연합대학(United Nations University)에서 추진하고 있는 WaterBase 프로젝트를 통해 토지이용도(24종류, 1km 해상도) 및 토양도(5,000종류, 10km 해상도)를 활용할 수 있는 상황이다. 하지만, 언급한 자료에 대한 국내검토는 충분히 이루어지지 못하고 있다. 따라서, 본 연구에서는 화천댐 상류유역을 대상으로 전세계 기상통신망 수문기상자료와 전지구 토지이용과 토양자료에 대한 검토를 수행하였다. 또한 물리적 기반의 장기유출모형인 SWAT-K의 입력자료로 활용하여 유역물수지 및 유출분석을 실시한 후, 그 적용성을 평가하였다. 이러한 연구는 기후변화 및 북한지역의 댐건설과 같은 한강수계의 수문학적 조건 변화로 인한 수자원 관리 및 계획를 위해 보다 활발히 이루어져야 할 것으로 판단된다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.2
• /
• pp.202-212
• /
• 1985

Numerical and experimental studies are presented for turbulent flows and heat transfer in annular channel with circumferential fins on the inner tube in a double pipe heat exchanger. Flow and heat transfer characteristics are periodically fully developed, and complex flow patterns are shown. Numerical calculations are executed by using modified TEACH-2E computer program based on the standard k-.epsilon. turbulence model. Mean velocity, turbulent kinetic energy, and Reynolds stress distributions are measured with the hot wire anemometer. Static pressures on the outer wall of the pipe are measured for three pitch-height ratios and several Reynolds numbers. Numerical predictions generally show reasonable results in comparison with experimental results. When the pitch-height ratio is about 5.0 and other geometric parameters are fixed in this paper, maximum heat transfer is achieved. Reattaching flow patterns appeared in this region. As the pitch between fins is increased beyond 5.0, mean Nusselt numbers are decreased and the pressure drop through one pitch almost remains.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.103-110
• /
• 2004

The major trend in global automotive market is changing drastically in the way that a vehicle FECPS(Front End Cooling Pack System) is designed and manufactured as an assembly part. The system can encompass many functions, be assembled into a vehicle as a module, and reduce the production cost as well as time. The FECPS consists of an impact beam, an aluminum condenser and a radiator, a carrier and a cooling fan with a BLDC motor. In order to predict the performance of a FECPS accurately, it is essential to properly model the air flow field through various heat exchangers, such as a condenser or a radiator. In this study, the flow field of the system is measured by a PIV(Particle Image Velocimetry) system. The result is compared with that measured with multi-channel anemometer.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.94-94
• /
• 2020

최근 정부의 신북방정책 추진에 따라 수자원분야에서는 동북아지역 국제 공유하천을 중심의 물 정보 및 연구협력 기회 확보와 지정학적 특성을 고려한 지역 현안해결 중심의 연구가 재조명 되고 있다. 두만강은 이러한 동북아의 중심에 위치하고 있으며, 중국, 북한, 러이사의 국경을 따라 흐르며 지역 수자원의 대부분을 공급하는 국제하천이다. 또한, 지난 2018년 5월에는 하구유역이 람사르(Ramsar) 습지로 승인됨에 따라 철새 등을 포함한 생태가치의 중요성도 크게 증가하였다. 하지만 이 지역은 유역의 지정학적 민감성과 접근이 제한된 관측 정보들로 인해 그 수자원·환경 효용성을 정확하게 파악할 수 없을 뿐만 아니라, 최근 기후변화에 따른 영향으로 홍수, 가뭄 등의 수재해와 수질오염 등의 문제가 발생하고 있어 가용한 기술기반의 직·간접적 접근을 통한 장기수문 및 환경변화 등에 대한 분석과 관리방안 수립 등의 연구가 필요하다. 본 연구에서는 이러한 미계측 두만강 유역을 대상으로 우선, 가용한 위성자료 및 광역지표모형(MERRA-2) 기반 NASA POWER(Prediction of Worldwide Energy Resource) 수문기상 자료와 SWAT(Soil and Water Assessment Tool) 모형을 활용하여 장기 수문영향을 평가하고자 한다. SWAT 모형은 전 지구적으로 활용 가능한 격자 해상도 약 30m의 위성기반 수치표고모형(DEM), 광역 토양도, 지역 토지이용도 자료를 활용하여 두만강 유역을 전체 19개 소유역 및 18개 하도, 138개 HRUs의 수문분석 단위로 구축하였으며, 모의는 미국 NOAA NCDC(National Climate Data Center) 및 중국 CMDC(China Meteorological Data Service Center)의 주요 관측지점에서 선별한 총 13개소의 위치에 대해 재분석된 기후/기상자료들(NASA POWER 강수, 기온, 풍속, 상대습도 및 일사량)을 적용, 1990년에서 2019년까지의 30개년도 연속자료를 구축활용 하였다. 한편, 모형의 검·보정은 앞서 언급한 관측 자료의 부재로 과거 문헌 등을 통해 파악할 수 있는 연 단위 수자원 총량 등을 활용해 진행코자한다. 아울러, 향후는 최근 활용 가능한 장기 위성관측 강수량을 적용, 재분석 자료 결과와의 비교를 통해 상호 분석 오류를 줄여나갈 수 있을 것으로도 판단된다.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.110-119
• /
• 2020

This study investigates the improvement in the performance of a temperature and humidity measuring system developed by Company A using the Aspirated Radiation Shield (ARS). The shield has been used in the industry and its accuracy was verified recently. The study also experimentally examines the impact of the wind speed of the ARS device on temperature and humidity. The results are summarized as follows. Before the improvement of the system, the temperature of Company A's system was up to 10.2℃ higher than that measured by the ARS device, and the measured relative humidity was approximately 20.0% lower. After improving the system, the temperature and relative humidity of nodes 1 and 2 were found to be almost identical. The temperature deviations including the maximum, mean, and minimum temperatures between those measured in node 2 and by ARS were approximately 0.2 to 0.7℃, respectively; further, the values measured by ARS tended to be slightly lower or higher. In terms of relative humidity, the ARS measurements yielded values approximately 10.0% higher immediately after sunset; otherwise, the values were approximately 1.9% lower. Moreover, when node 1 was set to minimum-middle, middle-maximum, and maximum, the deviations including the maximum, mean, and minimum temperatures of nodes 1 and 2 were 0.1 to 0.4℃, 0.0 to 0.2℃, and 0.0 to 0.5℃, respectively. The deviations including the maximum, average, and minimum temperatures of the three points of node 1 and the ARS ranged from 0.2 to 0.5℃, 0.1 to 2.2℃, and 0.1 to 1.1℃, respectively, indicating that the temperature deviation according to the wind speed was negligible. In addition, considering the results of the previous study with those from this study, the optimal wind speed to improve the temperature deviation is considered to be in the range of 1.0~2.0 m·s^-1.

• Journal of Bio-Environment Control
• /
• v.29 no.1
• /
• pp.73-79
• /
• 2020

The objective of this study is to analyze the heat transfer loss of covering materials in a single-span plastic greenhouse under the steady-state wind environment. To achieve this objective, the following were conducted: (1) design of a small-scaled wind tunnel (SCWT) to analyze heat losses of the greenhouse and its performance; (2) determination of the overall heat transfer coefficient (OHTC) for the covering materials using a small-scaled greenhouse model. The SCWT consists of the blowing, dispersion, steady flow, reduction and testing areas. Each part of the SCWT was customized and designed to maintain air flow at steady state and to minimize the variances in the SCWT test. In this study, the OHTCs of the covering materials were calculated by separating each with the roof, side wall, front and back of the small-scaled greenhouse model. The results of this study show that the OHTC of the roof increases as wind speed increases but the zones in which the increase rate of the OHTC decreased, were distinguished by wind tunnel wing speed of 2 ms^-1. For the side wall, the increase rate of the OHTC was particularly higher in the 0-1 ms^-1 zone.

• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.579-587
• /
• 2012

Shin-gumho station in Seoul underground subway have been selected to be experimentally investigated and analyzed for the real air supply & exhaust capacity compared to the original capacity of ordinary and emergency condition. The depth of Shin-gumho station is 43.6m which consists of the island-type platform ($8^{th}$ floor in underground) and a two-story lobby (first & second floor in underground). An emergency staircase connects between the platform and the lobby. Hot-wire anemometer, capture hood, wind vane & velocity meter and data acquisition systems are employed to perform the automatic measurement in this experiment. For ordinary case, air supply and exhaust capacity in the lobby were reduced by 34% and 46% compared to the original capacity, respectively. Air supply and exhaust capacity in the platform were reduced by 66% and 38%, respectively. For emergency case, air supply in the lobby was reduced by 42% and air exhaust in the platform was reduced by 28% compared to the original capacity. Therefore, air pollution in the station is expected to be worse in the ordinary environment and smoke control capability in the platform will be weakened in case of fire emergency.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.2
• /
• pp.31-40
• /
• 2023

We installed temporary strong motion seismometers at the ground surface, 1 m, 2 m, and 9 m at an existing seismic station that houses permanent seismometers installed at 20 m and 100 m, to investigate the influence of installation depth on the recorded ambient and anthropogenic noise level and the characteristics of earthquake signals. Analysis of the ambient noise shows that anthropogenic noise dominates where vibration period T < 1 s at the studied site, whereas wind speed appears to be strongly correlated with the noise level at T > 1 s. Frequency-wavenumber analysis of 2D seismometer array suggests that ambient noise in short periods are predominantly body waves, rather than surface waves. The level of ambient noise was low at 9 m and 20 m, but strong amplification of noise level at T < 0.1 s was observed at the shallow seismometers. Both the active-source test result and the recorded earthquake data demonstrated that the signal level is decreased with the increase of depth. Our result also shows that recorded motions at the ground and 1 m are strongly amplified at 20 Hz (T = 0.05 s), likely due to the resonance of the 3 m thick soil layer. This study demonstrates that analysis of ambient and active-source vibration may help find optimal installation depth of strong motion seismometers. We expect that further research considering various noise environments and geological conditions will be helpful in establishing a guideline for optimal installation of strong motion seismometers.