• 한국터널지하공간학회 논문집
• /
• 제19권3호
• /
• pp.517-532
• /
• 2017

도심지 터널에 주로 적용되는 횡류식 환기방식은 환기구간 거리가 길어질수록 환기성능이 저하되므로 균일한 풍량분배가 필요하다. 본 연구에서는 환기구간 거리가 길어져도 균일한 풍량분배를 통해 설계값의 환기성능을 확보할 수 있도록 급배기구의 개도율을 최적화하는 프로그램을 개발하였으며, TUNVEN DUCT 프로그램과의 비교를 통해 프로그램의 예측 성능을 검증하였다. 이를 위해 반횡류 급기 환기방식을 적용하였으며, 두 프로그램은 유사한 포트 크기 및 풍량 분배를 예측하고 있으며, 계산값의 변동범위는 각각 11.71% 와 1.36% 인 것으로 나타났다. 이 프로그램은 다양한 터널 연장 및 급배기 포트 설치 조건에 대한 신속한 분석이 가능하므로, 횡류식 및 반횡류 환기방식의 포트 최적화 설계에 상당히 유용할 것으로 판단된다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.701-705
• /
• 2009

After revision of law of architecture in 2006, all houses which have more 100 households must has ventilation unit for the indoor air quality. Optimal design of the natural and the mechanical ventilation has being considered. In this paper, it is carried out about optimal design for airflow distribution of total heat exchanger in houses using CFD. As the result, first design of ventilation has some problem in porch area. Adding diffusers in porch area and changing diffuser schedule make more efficient ventilation than original design.

• 설비공학논문집
• /
• 제21권10호
• /
• pp.545-552
• /
• 2009

It is common to design the duct branches where to supply the required air flow for individual room in residential apartment house. And TAB process is applied to control the designed air volume with adjusting volume dampers and/or supply diffusers after fully installing the ventilation system. This process has been resulted increasing the initial cost for the residential ventilation system because of man-hour and accessories such as volume control damper or diffuser. However it is difficult to adjust the air volume adequately in small air duct branches in residential ventilation system. The purpose of this study is to figure out the performance of Multidrop chamber coupling system for the residential ventilation system.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.589-593
• /
• 2007

In the mechanical ventilation system, it is a fundamental condition to distribute the air equally to the each room. In this study, distribution performance of the air distributor which generally connected to a circular duct was investigated by simulation and experiment. In the first CFD analysis, maximum air flow rate deviation was an 63% in the air distributor model. After numbers of model modification and simulation, maximum flow rate deviation was reduced to 19% in the final simulation model. An air distributor which used in the experiment was produced by using data obtained from the final analysis. When experimental result was compared with analysis result, there was a deviation difference as much as 9%.

• KIEAE Journal
• /
• 제9권4호
• /
• pp.17-22
• /
• 2009

It is common to design the duct branches where to supply the required air flow for individual room in residential apartment house. However it is difficult to adjust the air volume adequately in small air duct branches in residential ventilation system. The purpose of this study is to figure out the performance of Multidrop chamber coupling system for the residential ventilation system. The experiments were designed to simulate apartment of $84m^2$ and established multidrop chamber duct and general duct on the ceiling of the apartment. Distribution performance of air supply rate were evaluated in this experiments. As a result, distribution performance of air supply rate in the general duct is different from designed air supply rate by about 35% ~ 50% and about 10% in the multidrop chamber system. In additional the sound insulation performance of the multidrop chamber system decreased about 20% compared with general duct system. Therefore, the multidrop chamber system is considered to satisfy proper air supply rate of each room and to improve the sound insulation performance in apartment Houses.

• 설비공학논문집
• /
• 제19권9호
• /
• pp.622-629
• /
• 2007

Compact semi-center type automotive air handling system(AHS) is developed in this study and it's performance is compared with the conventional 3-pieces type air hand-ling system. The pressure drop is measured at component level and system level, and air flow rate and air distribution of discharge air through each ducts from air handling system are measured. System level characteristics of pressure drop at face and windshield discharge mode and air flow rate are investigated, and also temperature control linearities are tested. The volume of the air handling system package is reduced about 20%. And air flow rate increase about 5 to 20% compared to the conventional 3-pieces type air handling system at each discharge mode with significantly improved air pressure drop both component and system level. Also, air distribution and temperature controllability meet to evaluation criteria.

• 한국터널지하공간학회 논문집
• /
• 제21권1호
• /
• pp.177-188
• /
• 2019

횡류식 환기 시스템이 설치된 터널에서 급, 배기구 포트 개구면적의 최적화는 외부로부터 터널 내에 급기되는 신선공기의 분배를 균일하게 하고 터널 내 오염물질을 효율적으로 배출하여 터널 이용자에게 안전하고 쾌적한 터널 환경을 제공하기 위한 것이다. 이를 위하여 횡류 환기방식이 적용된 대심도 복층터널 내부에 균일한 급기 또는 배기풍량을 얻기 위해서 급, 배기구 포트 면적계산 및 최적화하기 위한 프로그램이 개발되었다. 개발된 포트 면적 계산 및 최적화 프로그램의 신뢰성 확보를 위해 현재 운영 중인 반횡류 환기방식을 적용하고 있는 터널의 덕트 내 풍속을 측정하였다. 또한 동일한 터널에 대한 3차원 수치해석을 수행하였고 CFD 결과를 측정된 값과 비교하였다. 분석결과, 프로그램이 예측한 값과 현장측정결과의 오차율은 약 6.72%를 보이고 있으며, 3차원 수치해석 결과와의 오차율은 약 4.86%로 나타났다. 두 결과 모두 10% 이내의 오차율을 보이고 있으므로, 이 포트 개구면적 최적화 프로그램을 사용해서 횡류식 터널의 급기 및 배기 포트의 최적화 설계가 가능할 것으로 기대된다.