• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.75-77
• /
• 2015

디스플레이 해상도가 지속적으로 고해상화가 되면서, 기존 저해상도 영상을 고해상도 디스플레이 크기에 맞춰 해상도를 키우는 기법인 초해상화(super-resolution, SR) 기법에 많은 관심이 쏟아지고 있으며 이에 대한 많은 초해상화 논문들이 게재되었다. 이 중 현재 최상 품질의 고해상도 영상을 복원하는 한 초해상화 기법은, 입력 받은 저해상도 영상을 자가 예제(self-examples)로 사용하여 선형 매핑(linear mapping)을 통해 점진적으로 여러 레벨(level)를 거쳐 조금씩 키우는 방법이다. 이때 각 레벨마다 기존 저해상도 영상 크기로 반복적으로 줄여 오차를 줄이는 역투영법(back-projection)을 사용하는데, 이 방법은 처리된 영상에 시각적 품질을 낮추는 링 아티팩트(ringing artifacts)를 생산하며, 이는 매 레벨마다 계속 누적이 되어 고해상도 결과 이미지 품질에 악영향을 미치는 단점이 있다. 이를 보완하기 위해, 본 논문에서는 저해상도 정지 영상을 고해상도 정지 영상으로 점진적으로 키울 때 일반적인 역투영법 대신 비국소적 평균법(non-local means, NLM) 기반 역투영법을 사용하는 초해상화 기법을 제안한다. 제안하는 기법은 매 레벨마다 생기는 링 아티팩트를 효과적으로 제거하여 높은 시각적 품질의 고해상도 영상을 복원할 수 있게 한다. 실험을 통해 제안된 초해상화 기법을 사용 시 기존 초해상화 기법보다 향상된 고품질 고해상도 영상 복원이 가능한 것을 확인하였다.

• Informatization Policy
• /
• v.24 no.1
• /
• pp.30-47
• /
• 2017

The Korean government developed an organizational maturity model for public data quality management based on international standards to evaluate the data quality management level of public organizations, However, as the model has too many indicators to apply on the site, a new model with reduced number of indicators is proposed in this paper. First, the number of processes is reduced by integrating and modifying the processes of the previous model. Second, a new maturity evaluation method is proposed based on capability levels focused on the activity, not on the process. Third, the maturity level of public data quality management is represented by five discrete levels or real values of 1 through 5. Finally, characteristics of the proposed model are compared with those of the previous model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.319-326
• /
• 2015

Rainfall data is necessary component for water resources design and flood warning system. Most analysis are used long-term hourly data of surface synoptic stations from the Meteorological Administration, Ministry of land, Infrastructure and Transport and others. However, It will be used minutely data of more high density automatic weather stations than surface synoptic stations expecting to increase the frequency of heavy precipitation. But minutely data has a problem about quality of rainfall data by auto observation. This study analyzed about quality control method using automatic weather station's minutely rainfall data of meteorological administration. It was performed assessment of the quality control that was classified quality control of miss Data, outlier data and rainfall interpolation. This method will be utilized when hydrological analysis uses minute rainfall data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.133-136
• /
• 2012

In this paper, we found the many effective ways and apply for improve the 3D quality of Autostereoscopic 3D display products. Autostereoscopic products compared to traditional 3D glasses, the disadvantage is the poor depth of 3D picture quality and it only can see the fixed distance and position. So, for the compensate this disadvantage, we use the Head tracking technology and video placement algorithms and several techniques. In this paper, the will report on how to improve the Parallax Barrier Autostereoscopic 3D quality through the Head tracking of the user identification, video replacement algorithms and crosstalk improving method.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.324-325
• /
• 2012

반도체 소자의 미세화가 진행됨에 따라 고품질의 절연막, 즉 낮은 두께에서 높은 밀도와 낮은 누설 전류를 필요로 하게 되었다. 이를 위해 기존의 화학 기상 증착법을 이용한 절연막 증착의 공정 압력을 낮추어 1 Pa 이하의 공정 압력에서 절연막 증착 공정이 필요로 하게 되었다. 본 연구에서는 화학 기상 증착법을 이용하여 최저 0.1 mtorr의 극 저압에서 SiO2 절연막증착 공정을 구현하였고, 증착된 박막의 특성을 평가하였다. Fig. 1은 공정 압력의 변화에 따른 화학 기상 증착 장비의 플라즈마 상태를 나타낸 결과이다. 1.5 mtorr의 공정 압력 까지는 플라즈마의 상태가 균일하게 나타나지만, 그 이하의 압력에서는 플라즈마 균일도가 떨어지는 결과가 나타났다. 이는 기존의 플라즈마 공정을 이용하여 절연막 증착 공정이 어려움을 제시하는 결과이며, 이의 해결을 위해 새로운 형태의 플라즈마 장치가 필요함을 시사한다. Fig. 2는 각각의 공정 압력에 다른 $SiO_2$ 박막의 증착 결과를 AFM을 이용하여 측정한 결과이다. 박막의 표면 거칠기 값은 0.9 mTorr까지는 3 nm 수준이며, 0.1 mTorr에서는 0.4 nm로 측정되었다. 플라즈마 상태가 균일하지 않은 0.1 mTorr에서도 비교적 균일한 박막을 얻을 수 있었으나, 높은 공정 업력에 비해 전체적인 균일도도 낮은 결과이며, 이는 플라즈마 상태를 보완함으로서 해결 가능하다. 측정된 박막의 밀도는 2.311~2.59 g/$cm^3$의 수준으로 벌크 상태의 밀도 값에 근접한 결과를 얻었으며 이는 저압에서 증착한 $SiO_2$ 박막의 품질이 높음을 시사한다. 절연막의 증요한 특성 중 하나인 누설 전류 값은 MIM 구조를 이용하여 측정하였다. 측정된 누설 전류 값은 10~12 A 수준으로 기존 반도체 소자 공정에 적용 가능한 수준이다. 고 품질의 절연체 박막 증착을 위해서는 플라즈마 구조를 보완할 필요가 있으며, 이를 이용하면 반도체 소자 제작에 요구되어 지는 절연막 증착이 가능할 것으로 예상된다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.225-230
• /
• 2020

The development of the industrial revolution can confirm the paradigm of manufacturing is changing from the mass production of small varieties to the form of small-scale production of many varieties. That is a form that can reduce the burden of indiscriminate raising of producers and a change in the industrial form that seeks to make up for the problems of the productivity portion that should change as modern society develops. Looking at the 3D printing environment, there are many problems in reaching the final stage of printing. The problem is not just the low-cost, low-end 3D Pirnter, but the high-priced 3D Printers released as finished products also show the same symptoms. This can cause anxiety factors in the printing process. Therefore, the research was conducted to compensate such problems. Based on the research, we propose the design of IoT beacon-based 3D Printer remote safety and quality control system targeting 3D Printer individual users.

• Journal of Digital Convergence
• /
• v.16 no.5
• /
• pp.239-245
• /
• 2018

So far, various researches have been conducted on evaluation of e-learning software, but subjective evaluation criteria are formed according to the classification presented from the viewpoint of the researcher rather than systematized form according to related standards. In addition, standards for software evaluation are continuously being supplemented for practical use, so it is urgent to establish evaluation bases by establishing evaluation criteria. Therefore, in order to establish the quality evaluation standard of e-learning software, this study analyzes the quality requirements of e-learning software based on the usability system among the quality characteristics of ISO/IEC 25000 series. This evaluation standard is distinguished by the fact that the evaluation standard of e-learning software that reflects the latest trend of related standardization has been established and practical utilization has been improved. It can be used effectively for quality evaluation and certification of e-learning software in the future.

• Informatization Policy
• /
• v.19 no.1
• /
• pp.45-73
• /
• 2012

Most online games today are provided via a website interface. Researchers found that various aspects of a game website importantly influence the success of the online game business. This paper aims at identifying key site-related quality factors affecting the success of online casual game websites and creating a model for measuring such success. To meet this end, we extracted basic factors from the literature and expanded them through a Delphi survey method in which domain experts were asked to identify key quality factors of online game websites. Then we performed a questionnaire survey using online game users for an empirical analysis. The results revealed that information quality, service quality, and system quality are all positively related to user satisfaction and that an increase in user satisfaction leads to an improvement in both gamer loyalty and business outcomes. However, it was found that gamers' loyalty does not necessarily increase business outcomes. The paper offers practical as well as academic implications based on the research findings.

• Journal of Digital Convergence
• /
• v.14 no.9
• /
• pp.241-250
• /
• 2016

This research aimed to analyze that there are main causes influencing the quality of trade distribution service. It means that the study was conducted to prove how the quality on trade distribution service affects customer satisfaction and loyalty with managers or higher who are responsible for trade distribution service overall. In accordance with analysis results, main causes (Reliability, Responsiveness, Support System) have a good implication for the quality of trade distribution, and Tangible has little influence. Moreover, customer satisfaction with the quality on trade distribution service has a positive impact on loyalty. Subject to the results, quality components of trade distribution service was ultimately verified that it has a positive relationship with loyalty via customer satisfaction. On the basis of this research, it is confidently expected to help improve the quality on trade distribution service.

• Journal of Convergence for Information Technology
• /
• v.11 no.1
• /
• pp.216-224
• /
• 2021

This study analyzes the differences in perception of cosmetic quality (safety, stability, functionality, usability) and satisfaction according to consumer characteristics, targeting 317 men and women from their 18 to 50s who use cosmetics in Seoul and Gyeonggi Province, and the differences in effect of cosmetic quality perception on satisfaction according to side effects experience was analyzed. Among the cosmetic quality factors, the usability was satisfied, but the perception of safety, stability, and functionality was low, so overall quality improvement was necessary. In particular, the quality perception and satisfaction by men and 40s was low, so a customized solution was needed for this. In the order of usability and functionality, to both those experiencing or not side effect, had a significant positive effect on the satisfaction level, and the improvement of usability and functional awareness was the main factor that increased satisfaction. Improving product quality and supplementing factors that positively influence consumer perception are thought to be of great help in improving quality perception and satisfaction.