• Korean Journal of Agricultural Science
• /
• v.36 no.1
• /
• pp.63-71
• /
• 2009

Two experiments were conducted to investigate feed value of Yukmijihwangtang (herbal medicine) meal. In experiment 1, the chemical composition of Yukmijihwangtang ingredients was determined before and after extraction, and investigated the effects of partial substitution of dried Yukmijihwangtang meal on TMR for fattening cattle. In experiment 2, nine Korean native male goats were employed to investigate the palatability and ruminal parameters of Yukmijihwangtang meal silages. In experiment 1, the crude protein content after water extraction was higher in Alisma orientale Juzepczuk (Teaksa), and lower in Pachyma hoelen Rumph (Bokryeong). the crude fat content after water extraction was higher in Cornus officinalis Sieb. et Zucc (Sansuyu), and lower in other ingredients. ADF content after water extraction of Cornus officinalis Sieb. et Zucc (Sansuyu) was higher compared to those of Pachyma hoelen Rumph (Bokryeong) and Paeonia suffruticosa Andrews (Mokdanpi). Dioscorea japonica Thunberg (Sanyak) was the lowest in ADF content. Dry matter disappearance was increased by adding Yukmijihwangtang meal to TMR. In experiment 2, feed intakes of Yukmijihwangtang silage containing molasses (0.5 and 1%) for 30 min and 6 hr were significantly higher than that of control (0%) in Korean native goats. In various ruminl parameters, molasses addition to silage materials trended to increase total VFA, propionate and valerate contents, but trended to decrease iso-butylate, butylate and iso-valerate contents in Korean native goats. In conclusion, Yukmijihwangtang meal could be used as partial substitution of low level in TMR for fattening cattle. Molasses supplementation to silage materials contained with herbal medicine meal could improve its nutritional quality and palatability for Korean native goats. One percent level of molasses addition could give a useful effect in ensiling.

• Korean journal of food and cookery science
• /
• v.9 no.1
• /
• pp.1-6
• /
• 1993

The possession of microwave range, oven and oven-microwave range has been greatly increased with 88 Seoul Olympic Game as a momentum, and the possession rate was by 68%. The respondent answered the function of microwave range to be more necessary than that of oven, and the two household commodities have been mostly used to reheat and heat simply prepared frozen foods. The 35% among total respondent wished to cook the prepared frozen foods like pizza, but the 87% prefered to cook bakery. The frequencies of the use of oven were 35%, 35% for cooking premix and raw materials, and 20%, 20% for cooking half-prepared and prepared foods, respectively. The respondent of 39% was interested in premix foods as a future preference for food forms, and the respondent with interest in half-prepared food was 30%, but the preference for raw materials and prepared foods showed a trend to be decreased. The respondent of 60ft had eaten out six times week, and 50% had eaten instant and fast foods 1~3 times week. As the results of this survey, most of consumers prefer to more convenient foods. Therefore, it is expected that the function of oven and microwave range would be widely useful if various foods are improved with regards to convenience for use and preference.

• Fire Science and Engineering
• /
• v.17 no.4
• /
• pp.76-85
• /
• 2003

In this study, we write down the definitions, their causes and the techniques of analysis as a theoretical consideration of common cause failures, and investigate the limitation and the importance of the common cause failures by applying to the analysis on the fire protection as a representative safety facility. As you can know in the reliability analysis, most impressive cause is the malfunctions of pumping operations; especially the common cause failure of two pumps is dominant. In other words, it is possible to assess system-reliability as twice as actual without CCF From these, CCF is extraordinarily important and the results are highly dependent on the CCF factor. And although it would increase with multiple installations, the reliability are not defined as linear with those multiplications. In addition, the differences in results due to the models for analysis are not significant, whereas the various sources of data produce highly different results. Therefore, we conclude that the reliabilities are dependent on the quality of the usable data much better than the variety of models. As a result, the basic and engineering device for the preventions of CCF of the multiple facilities is to design it as reliably as to design the fire-water pump. That is to say, we must assess those reliabilities using PFD whether they are appropriate to SIL (Safety Integrity Level) which is required for the reliability in SIS (Safety Instrumented System). The result of the analysis on the reliability of the fire-water supply with CCF shows that PFD is 3.80E-3, so that it cannot be said to be designed as safely as in the level of SIL5. However, without CCF, PFD is 1.82E-3 which means that they are designed as unsafely as before.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.3
• /
• pp.345-356
• /
• 1996

Properties of enzymatic hydrolysates from ascidian tunic were assessed on supernatant ratio, solid yields and solid concentration. The concentartion of solid and yields in the extracts were increased as the enzyme concentration raised from $100\;{\mu}l\;to\;1000{\mu}l$ during the extraction period. The optima concentration and reaction time of each enzyme on digestion were $400\;{\mu}l$ 60 minutes, through treated with Duncan's multiple test. The percent of yields of solid, protein and carotenoids for 60 minutes extraction at $400\;{\mu}l$ were $32.32\%,\;1.34\%\;and\;74.60\;mg\%$, respectively, in Viscozyme systems. The extracts were composed with many kinds of carbohydrates such as arabinose, ribose, xylose, galactose, glucose, N-acetyl-D-galactosamine, and N-acetyl-D-glucosamine. Aspartic and glutamic arid were noted as predominant amino acids in all parts. Amino acid profiles of various ascidian tunic part were similiar to each other, but most of essential amino acids content of inter coat was higher than that of root and tunic (body). About sixty six fatty acids components were observed, and their distribution among neutral and polar lipids was compared. The main fatty acids were found to be 14:0, 16:0, 16:1n7, 18:0, 18:1n9, 18:1n7, 18:2n6, 20:5n3, and 22:6n3.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.3
• /
• pp.357-368
• /
• 1996

To utilize the ascidian tunic as a natural pigment and dietary sources for rainbow trout (Oncorhynchus mykiss), juvenile were fed on experimental diets containing enzymatic hydrolysates of ascidian tunic treated with three commercial mined enzymes (ultrazyme, cellulase, viscozyme) for 12 weeks. From the results of feeding experiment, similar growth rate was checked in the enzymatic hydrolysis group compared with control, and those were a higher than of ascidian tunic powder group. The total acetone extractable pigment in muscle of the enzymatic hydrolysates group was lower than that of the ascidian extracts group and carophyll pink group until 8 weeks, but the level of those pigment of the enzymatic hydrolysates was similar to the ascidian extracts and carophyll pink group after 12 weeks. The lipid content was increased with the pigment concentration in the all experimental group. But the ascidian tunic pigment did not influence on the composition of the fatty acids in the muscle and liver. From the consideration of results for pigmentation, the enzymatic hydrolysates of ascidian tunic were suitable for both a natural pigment and dietary protein and carbohydrates sources as a substitute synthetic pigment for aquaculture use.

• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.701-710
• /
• 2004

Uncertainty was quantified to evaluate calcium determination result in infant formula with AAS (Atomic Absorption Spectrometry) and ICP-AES (Inductively Coupled Plasma-Atomic Emission Spectrometry). Uncertainty sources in measurand, such as sample weight, final volume of sample, sample dilution and the instrumental result were identified and used as parameters for combined standard uncertainty based on the GUM (Guide to the expression of uncertainty in measurement) and Draft EURACHEM/CITAC Guide. Uncertainty components of each sources in measurand were identified as resolution, reproducibility and stability of chemical balance, standard material purity, standard material molecular weight, standard solution concentration, standard solution dilution factor, sample dilution factor, calibration curve, recovery, instrumental precision, reproducibility, and stability, Each uncertainty components were evaluated by uncertainty types and included to calculate combined uncertainty. The kinds of uncertainty sources and components in the analytical method by AAS and ICP-AES were same except sample dilution factor for AAS. The analytical results and combined standard uncertainties of calcium content were estimated within the certification range $(367{\pm}20\;mg/100g)$ of CRM (Certified Reference Material) and were not significantly different between method by AAS followed by ashing and method by ICP-AES followed by acid digestion as $359.52{\pm}23.61\;mg/100g\;and\;354.75{\pm}16.16\;mg/100g$, respectively. Identifying uncertainty sources related with precision, repeatability, stability, and maintaining proper instrumental conditions as well as personal proficiency was needed to reduce analytical error.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.2
• /
• pp.261-266
• /
• 2009

All of the subjects of the investigation (n=141) were schools that have food services under direct management. The number of students who get food services at the schools were $1,001{\sim}1,500$ students with 46.8% investigation. In school food services, fried foods were highly preferred and the biggest merits of fried foods were (in order of highest importance) 'improvement of food services satisfaction'> 'source of calories supply'> 'easiness of cooking process'. Service frequency of fried food were in the order of 'twice a week'> 'three times a week'> 'once a week', and for the factors to decide service frequency of fried food, 'preference leaning on fried food', and 'excessive fat intake' were the most considered. The most considered factors in the case of choosing fried food were 'preference' and 'calories and nutritional value'. For the cautious steps during the frying process, 'keeping after frying' was picked the most, and the reasons were 'lack of containers to keep in appropriate temperature and quality' and 'time consuming'. For preference and service frequency of ingredients in fried foods, 'chicken' and 'pork' were very high. As the result, it was analyzed that preference by ingredients matched service in school lunches by using a ranking test. Total cooking and processing time of fried foods required in school lunches were approximately $237{\pm}99$ minutes ${\sim}291{\pm}141$ minutes which showed total required time was about same no matter what ingredients were used. As the result of comparing and analyzing the processes, vegetables took less thawing and frying time, but the processing time for vegetables was more complicated since handling time before frying was longer compared to meat. In the important management process by the main groups of fried foods, the frying process was the most cautious cooking process in the category of meat or fish and shellfish used as ingredients. In addition, if vegetables were used as ingredients, storing it after frying was the process that needed the most care.

• Korean journal of food and cookery science
• /
• v.27 no.5
• /
• pp.557-565
• /
• 2011

The objectives of this study were to investigate the physicochemical characteristics of soybean leaves in different cultivars and to develop a soybean curd prepared with soybean leave powder as a functional food. Four cultivars (Daewonkong leaf, Daepungkong leaf, Hwangguemkong leaf, and Seoritae leaf) were selected for this experiment. A significant difference was observed in the proximate composition of soybeans leaves (p<0.05). Soybean leaves had the highest content of carbohydrates. The mineral composition and isoflavone content in soybean leaves were significantly different among the cultivars (p<0.05). In particular, Daepongkong leaf had the highest content of genistein, daidzein, and total isoflavones. This study was also conducted to determine the quality characteristics of a soybean curd developed from daepongkong leaf with various concentrations (0, 0.1, 0.2, and 0.3%) of soybean leaf powder (SLP). The soybean curd yield rate increased according to the level of SLP added, whereas the L and a color values decreased. In the sensory evaluation, intensity scores for color, after taste, leafy taste, and chewiness were highest for the 0.3% soybean curd. The soybean curd with 0.2% SLP soybean milk attained the highest overall acceptability score. These results showed that soybean leaf was preferred over soybean curd containing 0.2% soybean leaf powder.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.1
• /
• pp.41-51
• /
• 2012

We produced Hwanggiju (added 0.5~2.0% of ground Astragali Radix compared to starch contents) and investigated the physicochemical characteristics, DPPH free radical scavenging activities, polyphenol contents, and sensory evaluation. For all treatments, the initial pH was 3.9~4.1 and gradually decreased for 6 days from the 1st mashing day, and then rapidly increased to 4.67. As the fermentation proceeded, total acid contents increased in most of the treatments, reduced temporarily after the 2nd mashing time because of the addition of starch material and water, and then slightly rose again. There were little changes in pH and total acid contents followed by adding ground Astragali Radix (AR) to the fermentation periods. Amino acidities of all treatments showed patterns of which consistently rose as the fermentation proceeded and slightly reduced followed by increasing the addition rate of ground AR to the mashes. Soluble solid and alcohol contents also increased continuously and there were few differences among the treatments followed by adding to the ground AR rate. In color, there was no differences in L value, but a and b value showed significant differences by adding ground AR rate. In DPPH free radical scavenging activities, the control (no AR added) showed 53.6% and when grinded AR added, there were improving effects of the activities (0.52~6.9%). In polyphenol contents, the control was 1.05 mg/mL and the ground AR added treatments increased slightly. In the sensory evaluation, the control received a relatively high score ($5.0{\pm}1.0$), and the treatments which added 0.5% ground AR during the 2nd mashing time were also well received ($4.5{\pm}1.3$).