• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.689-700
• /
• 2022

Layout work for building structures requires high precision to construct structural elements in the correct location. However, the accuracy and precision of the layout position are affected by the worker's skill, and productivity can be reduced when there is information loss and error. To solve this problem, it is necessary to automate the overall layout operation and introduce information technology, and layout process automation using construction robots can be an effective means of doing this. This study develops a prototype of an automated layout robot for building structures and evaluates its basic performance. The developed robot is largely composed of driving, marking, sensing, and control units, and is designed to enable various driving methods, and movement and rotation of the marking unit in consideration of the environment on structural work. The driving and marking performance experiments showed satisfactory performance in terms of driving distance error and marking quality, while the need for improvement in terms of some driving methods and marking precision was confirmed. Based on the results of this study, we intend to continuously improve the robot's performance and establish an automation system for overall layout work process.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.10
• /
• pp.99-110
• /
• 2009

In order to provide the design criteria, the characteristics of consolidation for soft ground improvement have been investigated using the field banking test performed by the vertical drain method at the northern container section in Busan New Port. Field test results indicated that the estimated degree of consolidation in design stage decreased by about 7% compared with the measured one. This difference is attributed to the fact that the conservative geological properties were applied with relatively high amount of maximum clay mixture ratio during the design stage. Based on this findings, another laboratory oedometer test was implemented to consider various combination of mixture ratio. It was found that the consolidation degree increased in accordance with the increase of sand/silt mixture ratio. Also, the proportion of 10%, 50%, and 40% for sand, silt, and clay, respectively, was observed as the best combination of mixture ratio to the actual measurement, which is very similar to the average grain size distribution in the banking test area. Therefore, it is suggested that the overall geological characteristics as well as the grain size distribution should be considered in design stage to improve the soft ground that contains mixture of sand, silt, and clay.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.303-308
• /
• 2023

The purpose of this study is to provide a practical guide for establishing BSC that can be practically applied by SMEs. To this end, a case study was conducted to establish a performance evaluation system through a field-required Balanced Scorecard (BSC) for company J, a tent pole manufacturer, and to provide a management strategy system map. As a survey method, the requirements of the ordering organization were organized through a comparison of the BSC-related proposal requests in the first stage. The BSC establishment method was organized through the arrangement of the second stage result report. The 3rd stage BSC derived KPI indicators for SMEs for each of the 4 perspectives. A corporate vision was derived through a 4-step SWOT analysis. A strategy map was developed through 5-step field-required KPI, weight setting, and BSC. The 6-step final strategy system was also drawn up. As a result of the study, the four perspectives of the BSC were reconstructed by department. That is, the financial (financial) perspective is from the executives' perspective, the customer's perspective is from the sales department's perspective, the internal process perspective is from the design department/production quality department's perspective, and the learning/innovation perspective is from the management department's perspective. In addition, a total of 11 CSFs and a total of 49 KPIs of J company were derived. The limitation of the study is that the final strategy system through the company's BSC has only been carried out, and it needs to be linked with the company's compensation system in the future.

• The Journal of Bigdata
• /
• v.7 no.2
• /
• pp.31-41
• /
• 2022

Steel is one of the most fundamental components to mechanical industry. However, the quality of products are greatly impacted by the surface defects in the steel. Thus, researchers pay attention to the need for surface defects detector and the deep learning methods are the current trend of object detector. There are still limitations and rooms for improvements, for example, related works focus on developing the models but don't take into account real-time application with practical implication on industrial settings. In this paper, a real-time application of steel surface defects detection based on YOLOv4 is proposed. Firstly, as the aim of this work to deploying model on real-time application, we studied related works on this field, particularly focusing on one-stage detector and YOLO algorithm, which is one of the most famous algorithm for real-time object detectors. Secondly, using pre-trained Yolov4-Darknet platform models and transfer learning, we trained and test on the hot rolled steel defects open-source dataset NEU-DET. In our study, we applied our application with 4 types of typical defects of a steel surface, namely patches, pitted surface, inclusion and scratches. Thirdly, we evaluated YOLOv4 trained model real-time performance to deploying our system with accuracy of 87.1 % mAP@0.5 and over 60 fps with GPU processing.

• Analytical Science and Technology
• /
• v.20 no.3
• /
• pp.183-192
• /
• 2007

The various environmental regulation directives such as RoHS (restriction of hazardous substances in electrical and electronic products) and WEEE (waste from electrical and electronic equipments) are practically used as the technical barrier in international trade (TBT) of vehicles and electrical and electronic products recently. Regarding such an environmental regulation, Korea Research Institute of Standards Science (KRISS) organized a proficiency testing scheme to establish the reliability of measurement results produced by the relevant research institutes and test laboratories in Korea. Participants were 31 laboratories related to production of the electrical and electronic equipments and mobile vehicles. Two polypropylene samples of pellet type were employed as the proficiency testing materials (PTMs). Cadmium and lead were the analytes chosen among six components regulated in European Union (EU) RoHS directive. The PTMs were sent to the participants by post on September $1^{st}$ 2006, and deadline for results submission were October $10^{th}$ 2006. The results of each laboratory were evaluated in comparison with KRISS reference values using Robustic Z-score and Youden plot methods. The results of the various sample digestion methods were also compared. Most of participants reported good agreement within 10 % range of reference values. However, results from several laboratories showed significant biases from reference values. These laboratories should establish the quality assurance system for improvement of the measurement reliability.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.348-355
• /
• 2023

Biodiesel is known as an environmentally friendly neutral fuel, and a policy of obligatory mixing of a certain ratio is implemented on land. In this study, to verify the feasibility of using biodiesel as a ship fuel, component analysis, metal corrosion test, and storage stability test were performed on the mixing ratios of 0 %, 5 %, 10 %, and 20 % of marine diesel and biodiesel. Component analysis evaluated a total of eight factors including density, kinematic viscosity and flash point according to ISO 8217:2017 standards and the reliability of biodiesel through metal corrosion tests and storage stability tests under atmosphere temperature and harsh conditions (60 ℃) for 180 days. Results demonstrate that component analysis satisfied the ISO 8217:2017 standard in all biodiesel mixing ratios. Furthermore, as the biodiesel mixing ratio increased, the kinematic viscosity, density, and acid value increased and the sulfur content decreased. Metal corrosion rarely occurred in the case of carbon steel, iron, aluminum, and nickel, whereas in the case of copper, corrosion occurred under the influence of oxygen-rich biodiesel under the harsh conditions (60 ℃) of 20 % biodiesel mixture. As for storage stability, discoloration, sludge formation, and fuel separation were not visually confirmed.

• Information Systems Review
• /
• v.24 no.4
• /
• pp.119-142
• /
• 2022

Organizations are attempting a digital transformation that converts physical business processing into virtual business processing. Through this digital transformation, organizations are overcoming time and space constraints and creating competitiveness. The digital transformation of this work environment has been accelerated as many organizations have implemented remote work due to the recent COVID-19 pandemic. This study focused on business process virtualizability, which is the result of the rapid digital transformation of the work environment. Business process virtualizability is the resulting quality, such as the suitability or excellence of business processing in a virtual environment. This research model is the effect of process, IT and organizational characteristics on business process virtualizability. As a result of the verification of people who have experienced remote work in a virtual environment, first, it was confirmed that, in terms of process characteristics, sensory requirements affect business process virtualizability, but relationship requirements, synchronism requirements, and identification and control requirements do not. Second, in terms of IT characteristics, it was confirmed that representation and reach affect business process virtualizability. Third, it was confirmed that, in terms of organizational characteristics, job autonomy affects business process virtualizability, but evaluation unfairness does not. This study found that representation and reach of IT had the most significant influence on business process virtualizability, job autonomy was next, and sensory requirements had the lowest influence. This presents practical implications for organizations to increase the success potential of business process virtualizability.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.1
• /
• pp.5-14
• /
• 2024

PHC piles demonstrate superior resistance to compression and bending moments, and their factory-based production enhances quality assurance and management processes. Despite these advantages that have resulted in widespread use in civil engineering and construction projects, the design process frequently relies on empirical formulas or N-values to estimate the soil-pile friction, which is crucial for bearing capacity, and this reliance underscores a significant lack of experimental validation. In addition, environmental factors, e.g., the pH levels in groundwater and the effects of seawater, are commonly not considered. Thus, this study investigates the influence of vibrating machine foundations on PHC pile models in consideration of the effects of varying pH conditions. Concrete model piles were subjected to a one-month conditioning period in different pH environments (acidic, neutral, and alkaline) and under the influence of seawater. Subsequent repeated direct shear tests were performed on the pile-soil interface, and the disturbed state concept was employed to derive parameters that effectively quantify the dynamic behavior of this interface. The results revealed a descending order of shear stress in neutral, acidic, and alkaline conditions, with the pH-influenced samples exhibiting a more pronounced reduction in shear stress than those affected by seawater.

• Research in Plant Disease
• /
• v.30 no.2
• /
• pp.124-130
• /
• 2024

Leaf blight caused by Stemphylium vesicarium is one of the most important fungal diseases of garlic (Allium sativum L.) worldwide, which results in a reduction of quality and yield. The breeding of resistant cultivars is an efficient approach to decrease the use of chemical fungicides and minimize crop losses. In this study, to find the resistant garlic resources against S. vesicarium, we evaluated the resistance degree of 20 garlic germplasms. To do this, garlic seedlings at four-leaf stage were rubbed with nonabsorbent cotton and then inoculated with spore suspension (3.0×10⁵ spores/ml of potato dextrose broth) of S. vesicarium by spray method. Three to seven days after inoculation, the infected leaf area (%) of garlic seedling was measured. 'Daeseo' and 'Namdo' were included as susceptible and resistant control cultivars, respectively. After 3 to 7 days of incubation, the infected leaf area (%) of garlic seedling was measured. Our results showed that IT245512, IT245528, and IT244068 lines exhibited the highest resistance against S. vesicarium, whereas IT257134 and IT253043 lines were more susceptible than the susceptible cultivar 'Daeseo'. Based on the results, the resistant genetic resources selected in this study can be used a basic material for resistant garlic breeding system against leaf blight.

• Korean Journal of Clinical Laboratory Science
• /
• v.55 no.4
• /
• pp.253-260
• /
• 2023

The germanium-68/gallium-68 (⁶⁸Ge/⁶⁸Ga) generator has high spatial utilization and requires little maintenance, making it economical and easy to produce. Thus, the frequency of use of ⁶⁸Ga radiopharmaceuticals is rapidly increasing worldwide. Therefore, this study attempted to develop an automated synthesizer for the routine clinical application of ⁶⁸Ga radiopharmaceuticals. The automated synthesizer was based on a fixed tubing system and the structure was designed after adjusting the position of the parts to reflect the synthesis method. Using various components that can be supplied in Korea, the automated synthesizer was manufactured at a much lower price cost than that of a commercialized automated synthesizer sold by companies. ⁶⁸Ga-DOTA-[Tyr3]-octreotide (⁶⁸Ga-DOTATOC) was synthesized to evaluate the performance of the automated synthesizer. ⁶⁸Ga-DOTATOC could be synthesized with about 65% of non-decay corrected yield, and the synthesized ⁶⁸Ga-DOTATOC met all quality control standards. We have synthesized ⁶⁸Ga-DOTATOC more than 100 times, and only faced a few problems caused by mechanical errors. In this study, we successfully developed a simple automated synthesizer for ⁶⁸Ga radiopharmaceuticals with high reproducibility. As various ⁶⁸Ga radiopharmaceuticals have recently been developed, it is expected that the automated synthesizer developed in this study will be useful for routine clinical use.