• International Journal of Highway Engineering
• /
• v.11 no.3
• /
• pp.111-120
• /
• 2009

Recently, pay adjustment regulation (PAR) has been developed to induce better performing road pavements around the country. This regulation was successfully applied during rehabilitation of highway flexible pavements for the first time, and their results are the focus of this paper. For highway pavements, a lot has been defined by typical amount of works a day. This lot was further divided into several sublots depending on field conditions. According to AASHTO Quality Assurance Guide Specification, pay factors for each lot were statistically determined with field measurements of five performance indicators. And composite pay factors were calculated by accounting for the impact of individual performance indicators on a long-term performance of pavement. In 2008, the PAR was tested with asphalt overlays conducted at all six local headquarters of Korea Expressway Corporation. Also, concerns raised during implementation are discussed in this paper. Limited data used in this study showed that if all performance indicators fall within the construction limits with less variances final construction costs may increase by 50%, whereas 10% reduction in construction costs could be necessary if key performance indicators such as density do not meet the construction quality requirements.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.204-204
• /
• 2020

환경부는 기존 대형 강우레이더 관측망에 대한 동해안 지역 관측공백 해소와 집중호우에 의한 재해예방을 목적으로 2기의 전파강수관측소를 삼척과 울진 통고산에 구축 운영하고 있다. 본 연구에서는 삼척 및 울진 전파강수관측소 관측 자료 품질 향상을 위한 다양한 품질 분석 기법을 소개하고 그 결과를 제시한다. 설치된 전파강수관측소의 시스템 특성 중 하나인 Short/Long 펄스 신호에 따른 자료의 연속/불연속성 및 피뢰침에 의한 자료 품질, 그리고 강수에 의한 신호감쇠에 따른 유효관측거리 등을 분석하였다. 이러한 분석을 기반으로 신호보정옵셋 및 피뢰침 위치 등을 조정하여 자료 품질을 향상하였다. 또한 삼척과 울진 전파강수관측소를 대상으로 분포형 비차등위상차 산정 기술을 적용하고 그 결과를 분석하였다. 비차등위상차는 시스템 편차나 우박 등의 영향에서 자유로워 특히 전파강수관측소와 같은 X 밴드 정량강우 추정에서 중요하다. 일반적으로 비차등위상차는 차등위상차에 대한 필터링 기법으로 산출하는데, 이 방법은 약한 강수에 대해 변동성이 크며 지형에코 등에 의해 영향을 크게 받는다는 단점이 있다. 본 연구에서는 일반적인 필터링 기법에 의한 비차등위상차와 분포형 기법을 적용한 비차등위상차에 대해 비교 분석을 하였다. 전파강수관측소 강우 자료를 이용한 분포형 비차등위상차 시험적용 결과 기존 비차등위상차에 비해 정성적으로 우위를 보임을 알 수 있었다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.2
• /
• pp.186-193
• /
• 2002

A new integrated torque and speed control algorithm has been proposed for the load balancing of rollers in continuous strip processing line(CSPL). Using the proposed method, the output torque and speed can be controlled to follow the reference in spite of nonideal effects such as the speed reference error and/or the controller gain difference between rolls. This new algorithm can be easily implemented in a motor drive system of each roll as it does not require the torque feedback of the others. Through the simulation and experiments for a simple CSPL consists of four driven rolls, the load balancing performance of the proposed scheme is presented and compared with that of conventional method.

• Journal of radiological science and technology
• /
• v.43 no.2
• /
• pp.115-121
• /
• 2020

In a digital radiation system using a Flat Panel Detector, we attempted to the quality control of digital radiography system using the Exposure Index and Deviation Index. Calibration was performed with the radiation quality suggested by the International Electrotechnical Commission, and through an experiment using a phantom, appropriate inspection radiation conditions applicable to medical institutions were selected. The study was conducted using the selected radiation conditions. Through those chest posterior anterior image, information such as examination conditions and exposure index was obtained. The deviation index was derived by analyzing the exposure index based on the target exposure index calculated by the phantom study. As for the analyzed exposure index, 97.1% was distributed within the range of ± 2.0 based on the deviation index. Quality control of medical images should be performed through management of inspection conditions through exposure index and deviation index and management of medical images.

• Journal of Bio-Environment Control
• /
• v.18 no.3
• /
• pp.215-224
• /
• 2009

A survey on the actual state of heating, cooling, ventilation, and air-flow and experimental measurement of temperature and humidity distribution in tomato greenhouse were performed to provide fundamental data required in the development of air-flow control technology. In single-span plastic houses, which account for most of 136 tomato greenhouses surveyed, roof windows, ventilation and air-flow fans were installed in a low rate, and installation specs of those facilities showed a very large deviation. There were no farms installed greenhouse cooling facilities. In the hot air heating system, which account for most of heating type, installation specs of hot air duct showed also a large deviation. The exhaust air temperature and wind speed in hot air duct also were measured to have a big difference depending on the distance from the heater. We are using the maximum difference as indicator to determine whether temperature distribution is uniform. However if the temperature slope is not identical in greenhouse, it can't represent the uniformity. We analyzed relation between the maximum difference and the uniformity of temperature and humidity distribution. The uniformity was calculated using the mean and standard deviation of data from 12 measuring points. They showed high correlation but were represented differently by linear in the daytime and quadratic in the nighttime. It could see that the uniformity of temperature and humidity distribution was much different according to greenhouse type and heating method. The installation guidelines for ventilation and air-flow fan, the spread of greenhouse cooling technology for year-round stable production, and improvement of air duct and heating system, etc. are needed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.492-500
• /
• 2018

The performance evaluation of cold weather clothing is mainly carried out with thermal resistance. However, the results of the revised test method regarding the same specimen were decreased compare to previous one. In addition, there were deviations of the results among the authorized testing institutes according to the different interpretation of the KS test method. This makes it a considerable difficulty to the quality assurance of combat supplies. The purpose of this study is to minimize the variation of the results before and after the revision by analyzing the cause of the decrease in the heat insulation rate according to the revised test method. For this purpose, the difference between the test conditions before and after the revision of KS is analyzed and the possible results are reviewed. In addition, we want to minimize the result deviation between testing laboratories by analyzing the cause of the result deviation between test laboratories according to arbitrary interpretation of the standard. Based on this, we propose a standardized test method to prevent the decrease of the heat insulation rate by checking the pre-revision test method and the condition with the least deviation.

• Journal of radiological science and technology
• /
• v.37 no.1
• /
• pp.1-6
• /
• 2014

Breast shooting performance management and quality control of the generator is applied to the amount of current IEC(International Electrotechnical Commission) 60601-2-45 tube voltage and tube current are based on standards that were proposed in the analysis of the test results were as follows. Tube voltage according to the value of the standard deviation by year of manufacture from 2001 to 2010 as a 42-3.15 showed the most significant, according to the year of manufacture by tube amperage value of the standard deviation to 6.38 in the pre-2000 showed the most significant, manufactured after 2011 the standard deviation of the devices, the PAE(Percent Average Error) was relatively low. This latest generation device was manufactured in the breast of the tube voltage and tube diagnosed shooting the correct amount of current to maintain the performance that can be seen. The results of this study as the basis for radiography diagnosed breast caused by using the device's performance and maintain quality control, so the current Food and Drug Administration "about the safety of diagnostic radiation generator rule" specified in the test cycle during three years of self-inspection radiation on a radiation generating device ensure safety and performance of the device using a coherent X-ray(constancy) by two ultimately able to keep the radiation dose to the public to reduce the expected effect is expected.

• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.132-140
• /
• 2022

This study was conducted to identify the optimal lotion manufacturing conditions with decursin and decursinol angelate of Angelica gigas Nakai extraction. Lotion was confirmed that it had viscosity (5,208±112 cPs), assay (99.71±1.01%), and pH (5.62) for 3 months. The optimization of manufacturing conditions of mixing 4 for lotion formulation were made by 22+3 full factorial design. Mixing temperature (40-80℃) and mixing time (10-30 min) were used as independent variables with three responses(assay, pH, and weight variation) as critical quality attributes (CQAs). The model for assay and weight variation identified a proper fit having a determination coefficient of the regression equation (about 0.9) and a p-value less than 0.05. Estimated conditions for the optimal manufacturing process of lotion were 61.93℃ in mixing temperature and 15.85 min in mixing time. Predicted values at the mixing temperature (60℃) and mixing time (20 min) were 100.69% of assay, 5.57 of pH, and 98.07% of weight variation. In the verification of the actual measurement the obtained values showed 100.29±0.98% of assay, 5.57±0.02 of pH, and 98.27±0.89% of weight variation, respectively, in good agreement with predicted values.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.601-606
• /
• 2008

When sharing real-time media in the ubiquitous computing environments, due to heterogeneous performance of devices, conflict to users' media service requirements might be occurred. To address the problems, there are extensive researches about media streaming QoS control schemes in the aspects of network or application. However, their deployment has met with difficulty because of critical reasons such as high development cost and system complexity. In this paper, in the level of media services, we propose a negotiation approach to offer improved quality of media services. The proposed approach Constructs video distribution group between producer and consumer services, which target to globally minimize the concession of users' quality requirements Consequently, users can be provided video services in the level of conformation to the users' expectation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1683-1691
• /
• 2013

Concrete surface grinding is frequently used for flatness of concrete surface, concrete pavement rehabilitation, and adhesiveness in pavement construction. The procedure is, however, labor intensive and has a hazardous work condition. Also, the productivity and the quality of concrete surface grinding highly depend on the skills of worker. Thus, the development of remote controlled concrete surface grinding equipment is necessary to prevent the environmental pollution and to protect the workers from hazardous work condition. However, it is difficult to evaluate the grinded surface objectively in a remote controlled system. Also, The machine vision system developed in this study takes the images of grinded surface with the network camera for image processing. Then, by representing the quality test results to the integrated program of the remote control station, the quality control system is constructed. The machine vision algorithm means the image processing algorithm of grinded concrete surface and this paper presents the objective quality control standard of grinded concrete surface through the application of the suggested algorithm.