• Food Science and Preservation
• /
• v.20 no.6
• /
• pp.791-797
• /
• 2013

This study was conducted to investigate the changes in the composition and microbiological properties of domestic sun-dried salt (white and gray salts) according to their collection time and production method. The results showed that the moisture contents of the white and gray sun-dried salts were 10.4~13.2% and 5.2~8.0%, respectively, and the sand contents were 0.1% and 0.2~0.3%, respectively, according to the month. Several samples exceeded the criteria of 15% moisture content and 0.2% sand content. The ash content and salinity of gray salt (below 85% and 90%, respectively) were higher than those of white salt (both below 80%). The total chloride contents of the salts collected in September and October were slightly lower than that of the others and exceeded the criteria of above 40%. In the case of mineral contents, there was no significant difference among the collection times because the analyses showed a marked deviation. The microbiological analysis showed that there was no significant difference among the production method, but the salt samples collected in September and October had relatively high detection rates of total aerobe, staphylococci, and halophilic bacteria.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.67-72
• /
• 2018

This study was conducted to investigate a potential of Yellow poplar (Liriodendron tulipifera L.) as a raw material for the manufacturing of particleboard (PB) and oriented strandboard (OSB). PB panels were prepared at the parameters of $0.7g/cm^3$ density, 15 mm thickness, three-layer, $E_1$ grade urea-formaldehyde (UF) resin, emulsion wax, and hardener. OSB panels were manufactured with a density of $0.65g/cm^3$, thickness of 10 mm, and $E_1$ grade of UF resin. Particle size of the face layer of PB was 20~80 mesh with 7~9% moisture content (MC), while that of core-layer was 3~20 mesh with 3~5% MC, which was similar to the production condition of commercial PB. As a result, the manufactured PB panels with 15.8 mm thickness, $0.7g/cm^3$ density, and 5.8% MC satisfied the requirement of bending strength of 15 type PB of Korean Industrial Standard (KS F 3104). Both internal bonding (IB) strength and surface screw withdrawal resistance also satisfied the requirement of 18 type PB of the standard. But, the edge screw withdrawal resistance satisfied the requirement of 15 type PB of the standard. These differences in properties could be due to the slenderness ratio of raw particles. In case of OSB panels with 10.7 mm thickness, $0.68g/cm^3$ density, and 5.8% MC satisfied all the requirements of bending strength, screw withdrawal resistance, and IB strength of 18 type PB of the standard. These results suggest that Yellow poplar wood has a good potential as a raw material for the production of PB and OSB.

• Food Science and Preservation
• /
• v.14 no.2
• /
• pp.119-123
• /
• 2007

Sprays containing chitosan, grain amino acids, or wood vinegar, were applied to vine leaves of the Campbell Early grape variety, and effects on the quality and storability of grapes were investigated. Weights of grape clusters and individual bemies did not differ significantly from the values seen when traditional agnicultural chemical treatment was used. The percentage of clusters over 300g in weight was, however, higher after spraying with chitosan, grain amino acids, or wood vinegar, than after agricultural chemical treatment, Grape moisture contents, levels of soluble solids, and reducing sugar concentrations, did not differ when the traditional treatment and the newer sparys were compared. Among minerals, the levels of potassium, iron and zinc measured in fresh grapes were increased by the clitosan, grain amino acids, and wood vinegar spray. After 8 weeks of MA storage, reducing sugar levels decreased, and titratable acidities increased, compared to levels measured at the beginning of storage. This was true regardless of the method of vine treatment the hardness of berries decreased slightly over 4-6 weeks of storage, and increased thereafter. The weight losses of grapes were relatively low(0.28-0.35%) on storage after any vine treatment tested. Grapes from vines sprayed with chitosan or grain amino acids showed a lower decay rate than did fruit from vines that had received a traditional agricultural chemical treatment. Sensory evaluation results indicated that the marketability of grapes from vines treated with traditional agricultural chemicals was better than that of grapes from vines sprayed with chitosan, grain amino acids, or wood vinegar.

• Korean Journal of Food Science and Technology
• /
• v.26 no.5
• /
• pp.500-506
• /
• 1994

For comparison of beef quality, four kinds of beef (Korean native cattle beef, dairy cattle beef, imported beef, cross-bred beef) were investigated through tenderness, juiciness and flavor related components measurement and organoleptic tests. Flavor related chemical components such as NPN, IMP, free fatty acid and free amino acids were analyzed, water holding capacity, contents of hydroxyproline and intramuscular fat were measured for evaluation of beef tenderness. Instron was also used for measuring beef tenderness as an objective method. Triangle test and descriptive analysis test were conducted for comparison and evaluation of preference of various beef samples. In hardness analysis using Instron, imported and cross-bred beefs had higher value than that of Korean native cattle or dairy cattle beef. Water holding capacity and pH of Korean cattle beef was higher than that of others. The intramuscular fat content of Korean cattle beef was highest, so it was expected juicier than other beef. In flavor related compound analysis, NPN content of Korean native cattle beef was the lowest, which shows it spent the least time among sample meats after slaughter. IMP, hypoxantine and inosine were most abundant in Korean native cattle beef. In free amino acids analysis showed that the proportion of basic acid and aromatic acid content of Korean native cattle beef was highest, whereas that of sulfur containing amino acid of imported beef was highest. TBA value of Korean native cattle beef was the lowest, and analysis of fatty acid composition revealed that the proportion of unsaturated fatty acid of Korean native cattle beef was higher than imported and dairy cattle beef, but similar to cross-bred beef. Organoleptic test was performed by triangle test and descriptive analysis. In triangle test, most panelist could distinguish Korea native cattle beef from imported beef and cross-bred beef, imported beef from cross-bred beef. In descriptive analysis which relys on subjective standards of panelists, there was no difference among beef in aroma, flavor and tenderness except juiciness. Even though contents of non volatile flavor compounds in Korean native cattle beef were higher than those of other beef samples, there were no significant differences in subjective panel test. The results showed that Korean consumers do not have common standards for beef quality evaluation.

• Korean Journal of Breeding Science
• /
• v.42 no.1
• /
• pp.75-86
• /
• 2010

End-use properties of 26 Korean wheat cultivars (KWC) were evaluated to assess consumer satisfaction with 6 imported wheat and 5 commercial wheat flours. In end-use quality testing of cooked noodles, Absorption of noodle dough sheet of ASW (Australian standard white) was similar to Anbaek, Eunpa, Gobun, Hanbaek, Jeokjoong, Jonong, Namhae, and Sukang. Thickness of noodle dough sheet of KWC was showed thin difference. In imported wheat and commercial flour, Commercial flour for baking cookie (Com5) with lower protein flour was lower than those flours. In lightness of prepared noodle dough sheet, Lightness value ($L^*$) of KWC was lower than those of Commercial flour for making white salted noodle (Com1), commercial flour for making for yellow alkaline noodle (Com2), and commercial flour for multi-purpose (Com4). Lightness value ($L^*$) showed significantly negative correlations with particle size of flour, ash, damaged starch, and protein content. Hardness of cooked noodles positively correlated with protein content. In texture of cooked noodles, Hardness of Com1 was similar to that of Alchan, Dahong, Jeokjoon, and Sukang. Also, hardness of Com2 was similar to that of Gobun, Jokyung, Jonong, Keumkang, and Namhae. In end-use quality of bread, bread loaf volume of commercial flour for making bread (Com3) was similar to Alchan, Jokyung, Keumkang, and Namhae but firmness was low. Bread volume showed better relationships with higher SDS-sedimentation volume, longer mixing time of mixograph, higher height of dough during development. Firmness of crumb was negatively correlated with bread volume. Diameter of cookie showed significantly negative correlations with particle size of flour, damaged starch, and protein content. Also, Top gain score became higher as the increase diameter of cookie. In end-use quality testing of cooked cookie, Cookie diameter of Com5 was similar to that of Dahong, Geuru, Olgeuru, Tapdong, and Uri but top grain was low.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.1
• /
• pp.132-141
• /
• 2012

This current survey was conducted to examine consumer attitudes toward factors determining beef purchasing and improving distribution systems. The frequency of beef purchasing was shown to reflect social and economic status, where inhabitants in large cities, such as Seoul, with higher salaries showed a higher frequency. In addition, consumers that were in their forties bought beef more frequently than consumers that were in their twenties. Consumers in Seoul and the megalopolis with a monthly income of higher than 200 million won preferred to purchase meat from department stores and discount markets. In contrast, people in small cities with lower incomes tended to buy meat from butcher shops and brand shops. In a question regarding unsatisfaction factors of retail beef, individuals that were in their thirties with a high income had concerns associated with packaging problems. For people under thirty with low income, the consistency of quality and price were the prime concerns. In regards to the beef grading system, consumer response varied between inhabitants, monthly income and age group, where consumers from small cities that were in their twenties and forties with a low income had a negative viewpoint. For the differential beef distribution system, housewives between the ages of 30 and 40 from a small city with an income higher than 200 million won had a positive response; however, a large number of consumers were not familiar with this system. The most demanding beef cuts were in the following order: loin, flank and rib. In addition, the most important factors determining purchasing beef were as follows: price, breed and portion.