• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.1
• /
• pp.57-63
• /
• 2021

In this study, isoscoparin was selected as an indicator component to develop Silene seoulensis extract as a functional cosmetic material, and we developed an analysis method using high performance liquid chromatography (HPLC) for quality control. HPLC was performed on a Unison US-C18 with a gradient elution of 0.05% (v/v) trifluoroacetic acid (TFA) and methanol at a flow rate of 1.0 mL/min at 35 ℃, and the detection wavelength was 330 nm. The HPLC method was performed in accordance with the international conference on harmonization (ICH) guideline (version 4, 2005) of analytical procedures with respect to specificity, precision, accuracy, and linearity. The limits of detection and quantitation were 0.02 and 0.07 mg/mL respectively. Calibration curves showed good linearity (R2 > 0.99988), and the precision of analysis was satisfied (less than 0.46%). In addition, the recovery rate was in the range of 99.10 to 101.61%, it was shown to be accurate. This result indicated that the established HPLC method is very useful for the determination of marker compounds in Silene seoulensis extracts.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.267-267
• /
• 2021

제주도는 화산섬의 지질특성상 강수의 지표침투성이 높아 지표수의 개발이용여건이 취약한 관계로 용수의 대부분을 지하수에 의존하고 있다. 따라서 지하수의 보전관리는 매우 중요한 사항이며 특히 지하수의 안정적인 이용을 위해서는 지하수 취수가 주변지역 지하수위에 미치는 영향 분석이 반드시 필요하다. 본 연구는 딥러닝 알고리즘인 Long Short-Term Memory(LSTM)를 활용하여 제주도 남동쪽 표선유역 중산간지역에 위치한 2개 지하수위 관측정을 대상으로 지하수 취수영향을 분석하였다. 입력자료로써 인근 2개 강우관측소의 일단위 강수량자료와 인근 6개 취수정의 지하수 취수량자료 및 연구대상 관측정의 지하수위 자료(2001. 2. 11. ~ 2019. 10. 31.)를 사용하였다. 지하수위 변동특성을 최대한 반영하기 위해 LSTM의 예측일수를 1일로 설정하였다. 보정 및 검증 기간을 사용하여 매개변수의 과적합을 방지하였으며, 테스트 기간을 사용하여 LSTM의 예측성능을 평가하였다. 평가지수로써 Nash-Sutcliffe Efficiency(NSE)와 평균제곱근오차(RMSE)를 사용하였다. 그리고 지하수 취수가 주변 지하수위 변동에 미치는 영향을 분석하기 위해 취수량을 최대취수량인 2,300 m³/일, 최대취수량의 2/3인 1,533 m³/일 및 0 m³/일로 설정하여 모의하였다. 모의결과, 2개 감시정의 보정, 검증 및 예측기간에 대한 NSE는 최대 0.999, 최소 0.976의 범위를 보였으며, RMSE는 최대 0.494 m, 최소 0.084 m를 보여 LSTM은 우수한 예측성능을 나타내었다. 이것은 LSTM이 지하수위 변동특성을 적절히 학습하였다는 것을 의미하며 따라서 추정된 매개변수를 활용하여 지하수 취수영향을 모의 및 분석하였다. 그 결과, 지하수위 하강량은 최대 0.38 m 였으며 이것은 대상지점에 대한 취수량은 지하수위 하강에 거의 영향을 주지 않는다는 것을 의미한다. 또한 취수량과 지하수위 하강량과의 관계는 한 개 관측정에 대해 선형적인 관계를 보인 반면 나머지 한 개 관측정에 대해서는 비선형적인 관계를 나타내는 것을 확인하였다. 따라서 LSTM 알고리즘을 활용하여 제주도 표선유역 중산간지역의 지하수위 변동특성을 분석할 수 있다.

• Journal of Korea Port Economic Association
• /
• v.39 no.3
• /
• pp.191-210
• /
• 2023

The Covid-19 pandemic has had a significant impact on global logistics and supply chains, leading to major discrepancies in logistics performance across countries worldwide. Through an examination of logistics performance index and supply chain tracking data, this study aimed to identify the changes in global supply chains and logistics environments during the pandemic. The analysis of the logistics performance index showed that overall, countries around the world, especially developed nations, showed improvements in metrics such as customs and border management efficiency, the quality of trade and transport infrastructure, capability and quality of logistics services, and cargo tracking abilities. However, the competitive pricing feasibility of international transportation and the on-time delivery frequency of goods saw a decline due to the pandemic's effects. The supply chain tracking data revealed that ports in Asian countries demonstrated high processing efficiency. In contrast, the U.S. and European countries took comparatively more time. Particularly for air cargo, parcels, and express shipments, the U.S. showed relatively longer processing times, leading to logistical delays. In conclusion, during the Covid-19 pandemic, Asian countries maintained relatively high efficiency in their logistics and trade environments. Conversely, the U.S. and some European countries showed delays and decreased efficiency in various metrics. In the future, efforts should be made to address delays and congestion, namely, the deceleration of logistics processes.

• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.321-326
• /
• 2008

The software defects that are not found in the course of a project frequently appear during the conduct of the maintenance procedure after the complete development of the software. As the frequency of surfacing of defects during the maintenance procedure increases, the cost likewise increases, and the quality and customer reliability decreases. The defect rate will go down only if cause analysis and process improvement are constantly performed. This study embodies the defect tracking system (DTS) by considering the Pareto principle: that most defects are repetitions of defects that have previously occurred. Based on the records of previously occurring defects found during the conduct of a maintenance procedure, DTS tracks the causes of the software defects and provides the developer, operator, and maintenance engineer with the basic data for the improvement of the software concerned so that the defect will no longer be manifested or repeated. The basic function of DTS is to analyze the defect type, provide the measurement index for it, and aggregate the program defect type. Doing these will pave the way for the full correction of all the defects of a software as it will enable the defect correction team to check the measured defect type. When DTS was applied in the software configuration management system of the W company, around 65% of all its software defects were corrected.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.408-408
• /
• 2022

환경부 홍수통제소의 경우는 전국단위의 강수량(지상, 레이더), 하천수위, 유사량 관측과 국부적으로 증발산량과 토양수분 관측이 이루어지고 있는 상황이며, 기상청 및 다른 공공기관도 각 목적에 맞게 수문기상관측이 이루어지나 유역(또는 지역) 단위의 물순환 과정(강우량, 유출량, 증발산량, 지하수함양량, 토양수분량 등 포함)을 규명하는 조사·연구는 매우 미비한 실정이다. 개별적인 물순환 성분별 수문조사에서 벗어난 전체적인 관점을 고려한 유역단위의 물순환 과정을 규명하는 것은 매우 중요하다. 즉 물순환 성분별 명확한 수문량 산정 결과는 수자원 개발과 물환경 보전에 중요한 정보를 제공할 수 있다. 따라서 물순환 성분별 명확한 분석을 위해서는 중·소규모 유역 단위를 대상으로 지속적이고 신뢰성 있는 자료의 획득과 축적이 중요하므로 중·소규모 유역 단위의 대표성 있는 시험유역의 운영은 매우 의미가 있다고 볼 수 있다. 본 논문에서는 한국건설기술연구원에서 운영하는 차탄천 유역(보막교 수위관측소 기준, 유역면적 88.17km², 유로연장 18.69km, 유로경사 1.62%, 경기도 연천군 소재)의 2021년 수문관측자료를 이용하여 지표수 물순환 성분인 강우량, 하천유출량, 증발산량의 자료를 산정하였다. 기본 관측자료인 강우량은 각 지점강우량의 관측자료의 비교·검토 등 품질관리를 통해 자료를 확정하고 유역평균강우량을 산정하였다. 하천수위는 기준수위표와의 검토를 통해 자료를 확정하였으며, 하천유출량은 기존 유량측정성과와 단면검토를 통해 수위-유량관계곡선식을 개발하고, 확정된 수위자료를 적용하여 산정하였다. 그리고 증발산량은 유역내의 기상관측자료와 유역인근 3개 관측소(동두천, 파주, 철원)의 기상자료를 이용하여 잠재증발산량을 산정하여 추정한 값이다. 각 물순환 성분별로 생성된 2021년의 차탄천 유역(보막교 수위관측소 기준)의 총강우량은 1,149.8mm이며, 하천유출량은 701.2mm(총강우량 대비 61.0%), 실제증발산량(잠재증발산량 추정값)은 381.3mm(33.2%)이며, 그 외는 유역 손실량이다. 이와 같이 산정된 물순환 성분별 자료는 유역의 물순환 과정 규명을 위한 기초자료로 매우 유용하게 활용될 수 있으며, 유역 물관리를 위한 의사결정 과정에 중요한 역할을 할 수 있을 것으로 기대된다.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.3
• /
• pp.36-48
• /
• 2015

To complete various types of finish works with higher quality in much less time, TACT, which was mostly used for high-rise buildings, has been adapted to meet the needs for systematic schedule management in construction sites. However, the effectiveness of adapting TACT has not been shown as expected due to the different perspectives on productivity from both general contractor and subcontractors based on unforeseen conditions according to the types of site. Furthermore, not enough theoretical backgrounds, empirical data, and systematic approaches to solve the fundamental problems caused by each participants' different views on productivity has produced obstacles for establishing effective solutions. Therefore, this research aims to analyze the possible main reasons for having different point of views regarding productivity among various participants of residential building sites using TACT based on literature review, site survey, and interviews. Also, case study was conducted to propose obtainable productivity (OP) regression equation and productivity achievement ratio (PAR) with reduction factors (RFs) and actual productivity (AP) data from an actual construction site. The proposed outcome may assist general contractors converting output management with PPC to productivity management with actual data using PAR. On the other hand, subcontractors would be able to estimate theory-based maximum productivity of construction sites with TACT by using OP. The PAR will enhance the communication between general and sub-contractors for their decision making process. Finally, the main RFs derived from PAR could be used as essential keys for productivity management to increase the economical and operational effectiveness of the construction project.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.432-435
• /
• 2008

It's necessary to judge between success and failure of a project in order to secure the objective evaluation index and the transparency of that. In case of the public works including a construction section, the large-scale budget input proceeds, but the awareness regarding the efficiency and usefulness of the public works is decreasing because it's hard to estimate benefit originated from the results of the budget input. Therefore, this study is to propose the measurement standard for the post-evaluation based on the list of the resident response degree and user satisfaction degree to systematically and quantitatively measure the results of the post-evaluation for the public projects within the range of quantifying the consumer satisfaction degree for the facilities which preform the post-evaluation among the public projects with 50 billion budget.

• Journal of the Korean Society for information Management
• /
• v.33 no.4
• /
• pp.27-57
• /
• 2016

The objective of this study is to explore the strategies to promote the use of the subject guide for Korean modern literature. To meet this objective this study conducted a survey on users' awareness of the subject guide service and sought out experts' opinions to identify the strategies to promote and improve the subject guide for Korean modern literature. The study proposes the following strategies: 1) Conduct promotional activities utilizing a variety of social media; 2) provide education for the user to enhance understanding of the utility of the subject guide; 3) build a website dedicated to the subject guide service for Korean modern literature; 4) provide an efficient subject-specific bibliography service by improving the quality of the subject guide, by offering full texts, ongoing content updates, and coordination with other institutions and agencies; and 5) tailor the service to user characteristics such as gender, age, occupation, and education level. Suggestions for future directions include research on the collaborative system, additional specific promotional strategies to promote the use of the subject guide, and development of evaluation indicators of the subject guide for Korean modern literature.

• Journal of the Korean Society for information Management
• /
• v.24 no.4
• /
• pp.345-374
• /
• 2007

Community colleges are key constituents of higher education in Korea, along with four-year universities. The number of community colleges in Korea also holds significance. However, the main focus of the Master Plan for Library Development decisively lies in university libraries, with little consideration to the poor condition of community college libraries. This study aims to identify problems of community college libraries by conducting a document research on their current standing and, based on that, to present six policy proposals for government support. They are a) to develop library collections based on the school specialty, b) to build theme-oriented libraries, c) to facilitate cooperation between community college libraries, d) to reinforce capacities for library service, e) to improve legal status of community college libraries and develop an evaluation index, f) and to estimate demand and evaluate service quality.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.112-117
• /
• 2016

For artificial ground greening construction without root-proofing layer, this research reviewed the effect on watertightness of asphalt waterproofing layer by plant roots penetration based on crack width, and crack penetrated roots. Experiment on concrete crack width was performed with three conditions such as 0.15, 0.30, and 0.45 mm, and all three conditions confirmed that all plant roots penetrations were made through crack area in 12 ~ 18 months. In addition, according to evaluation of effects on waterproofing layer by crack penetrated plant roots and in condition of 0.45 mm crack width, it indicated that penetration is made on asphalt waterproofing layer in 12 months due to roots penetration.