• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.74-80
• /
• 2021

This study investigated the process quality level of a K5 gas mask, which recently acquired its operational capability, through statistical process analysis for the mass production stages and their lots. The tensile adhesion strength was the only operating requirement in the manufacturing process of the K5 gas mask. For this purpose, the results of tensile adhesion strength between the lens and facial rubber during the initial and second mass production stages were analyzed using conventional statistical and statistical process analysis methods. The conventional statistical results indicated that the second mass production stage was better than the initial mass production stage. In cases of a control chart and process capability of tensile adhesion strength, the process quality level was also improved by following the mass production stages. The improvement was caused by process stabilization and work skill elevation. These results and methods are expected to be conducted and utilized in the third mass production stage. Moreover, quality improvement of K5 gas mask mass production can be achieved using the Lean 6 sigma procedure, MDAIC (Define, Measure, Analyze, Improve, Control).

• The KIPS Transactions:PartD
• /
• v.12D no.7 s.103
• /
• pp.993-1000
• /
• 2005

Recently, software quality evaluation based on ISO/IEC 9126 and ISO/IEC 14598 has been widely accepted in various areas. However, these standards for software quality do not provide practical guidelines to apply the quality model and the evaluation process of software product=5. And the qualify management in most software projects has been conducted by managing defects without applying the standards for software qualify. Thus, we present a quantitative quality evaluation approach of artifacts in the Component Based Development (CBD). Particularly, our evaluation approach allows most of the standard evaluation process and adopts a quantitative quality model which uses the weights of quality characteristics obtained through carefully selected questionnaires for stakeholder and Analytic Hierarchical Process(AHP). Moreover, we have also examined the proposed evaluation approach with applying the checklists for the artifacts of the CBD to a small-scale software project. As a result, we believe that the proposed approach will be helpful for acquiring the high quality software.

• Convergence Security Journal
• /
• v.12 no.3
• /
• pp.11-17
• /
• 2012

According to ISO/IEC 9000, quality to satisfy users' requirements when using the product or service is defined as the characteristics of the synthesized concept. Secure web application coding information systems with the reliability and quality of service is one of the determining factor. Secure coding in order to achieve the quality based on the model is necessary. The reason is that the security is in quality properties in the range of non-functional requirements that necessitates. Secure coding for the design of quality systems based on the quality of the definition of quality attributes, quality requirements, quality attribute scenarios are defined, and must be set. To this end, referring to IEEE 1061 quality model for web application, quality model structure is developed. Secure web application architecture design is composed of coding quality of the model systems, web applications draw interest to stakeholders, decision drivers secure coding architecture, quality attributes, eliciting quality requirements of the security settings, creating web application architecture descriptions and security framework.

• Journal of the Korean Society for information Management
• /
• v.36 no.1
• /
• pp.73-94
• /
• 2019

The purpose of this study is to investigate the quality of service that affects satisfaction of special library users and to suggest ways to improve the function and role of special library. The data were collected by survey and interview method conducted with 111 library users in 6 local research institute using modified questionnaires based on LibQUAL+. The results revealed that human quality factor had more influence on library service satisfaction than space and information quality factor. Also, there were statistically significant influence between library service satisfaction and three sub service factors, such as service attitude, space convenience, and information usability. The interviewers indicated problems of special library service in lack of data, inactivation of digital data, space problem, data sharing problem, and lack of experts. Finally this study proposed several suggestions to improve service quality of special library of local autonomous entity research institution.

• Proceedings of the Korea Database Society Conference
• /
• 1999.10a
• /
• pp.191-201
• /
• 1999

데이터 웨어하우스와 데이터 품질에 관한 문헌연구를 통하여 데이터 웨어하우스 환경에서 데이터 품질의 향상을 위한 개념적 프레임워크를 개발하고자 하는 것이 본 연구의 목적이다. 데이터 웨어하우스 데이터 품질향상 활동을 지원하는 프레임워크를 개발하는 목적은 (1) 다양한 요구를 가진 사용자들이 웨어하우스 데이터에 접근하기 때문에, 사용자의 요구를 만족시키며 기업의 목적에 적합한 품질향상 활동을 지원하기 위해서이며, 다양한 기업활동을 가장 잘 지원할 수 있는 데이터 품질향상 지침을 관리자에게 제공하기 위해서 이다. (2) 웨어하우스 관리자의 데이터 품질향상 활동을 지원하기 위해서는 품질차원이나 데이터세트 등과같은 품질향상에 필요한 다양한 이슈를 관리자가 인식할 수 있도록 하기 위해서이다. (3) 데이터 웨어하우스 환경에서 데이터 품질 향상에 필요한 체계적이고 포괄적인 안목을 제공하기 위해서이다. 본 연구는 다음과 같은 단계로 수행하게 된다. 첫째, 데이터 웨어하우스의 개념과 데이터 웨어하우스의 구축단계 및 데이터 웨어하우스를 구성하는 프레임워크를 검토한다. 둘째, 데이터 웨어하우스 환경에서의 데이터 품질의 기준과 데이터 품질의 측정 및 데이터 품질의 향상 방안 등을 고찰한다. 셋째, 데이터 웨어하우스 환경에서 데이터 품질의 향상을 위한 개념적 프레임워크를 개발하기 위하여 데이터 웨어하우스 데이터 풀질 향상과 관련된 기업활동, 데이터 세트, 품질의 속성 및 차원 등을 정의한다. 마지막으로 데이터 웨어하우스 환경하에서 데이터 품질을 향상할 수 있는 3차원 구조의 개념적 프레임워크를 제안하며, 나아가 제안한 모형에 대하여 데이터 품질 향상을 위한 프로젝트 활동의 사례를 통하여 모형의 타당성을 개념적으로 설명한다.통하여 각각의 제품을 비교하였으며, 둘째 소프트웨어 종류별 평가로 제품을 응용소프트웨어, 응용개발도구, 시스템 소프트웨어로 분류하여 평균값으로 비교하였다. 셋째, 국내외 제품별 평가분석으로 전체 제품을 국내제품과 국외제품으로 분류하여 비교하였으며, 마지막으로 총괄분석을 통해 가중치를 적용하여 전 제품의 점수를 비교하였다. 여기에서는 각 제품의 평균점수에 대한 차이를 95%의 유의수준으로 T-Test를 실시하였다.uted to the society, and what the socioeconomic impacts are resulted from the program. It would be useful for the means of (ⅰ) fulfillment of public accountability to legitimate the program and to reveal the expenditure of pubic fund, and (ⅱ) managemental and strategical learning to give information necessary to improve the making. program and policy decision making, The objectives of the study are to develop the methodology of modeling the socioeconomic evaluation, and build up the practical socioeconomic evaluation model of the HAN projects including scientific and technological effects. Since the HAN projects cons

• The Journal of the Korea Contents Association
• /
• v.16 no.6
• /
• pp.529-536
• /
• 2016

The purpose of this research is to evaluate the quality of Differential Police Response strategy. Although it has been approximately three years since these new police response systems were introduced, there is no research to evaluate them empirically. Using two types of statistical quality control techniques, Xbar-R control charts for variables data and P charts for attributes data, this study analyzes approximately 3,000 calls reported throughout the year 2012 to the 112 Integrated Dispatch Center in Ik-san police station. The Xbar-R control charts revealed that the police did not consistently respond to an emergency call for service (i.e., code one case) within 3 minutes. The P control chart also identified that there was a significant variation in the portion/number of defective calls where police failed to respond to non-emergency calls for service within 5 minutes. The results from this study suggest the police may need to review the target response time for code 1 and code 2 respectively.

• The Journal of the Korea Contents Association
• /
• v.14 no.7
• /
• pp.559-570
• /
• 2014

The purpose of this study is to derive the suggestion of satisfaction of e-book services on the basis of the recent literature on quality assessment for e-service which have been mainly studied on library realm. For this purpose, This study added post-management service which is applicable to measure satisfaction of e-book services based on E-S-Qual and Libqual. We expand our scope of service to using of e-book content and services for individual customers, and analyzed the relationship between satisfaction with the system, the content, the after-sale service. On this foundation, existing e-book service companies can offer their services more efficiently, thereby making the e-book content more diverse, along with developing specialized e-book service to increasing their customer's satisfaction. In addition, the latest and diversity is important as well. Moreover, performing rapid post-management services after the sale of the product or service, can be important variables for customer satisfaction. Therefore, not only the system and content, providing required level post-management services by customers can satisfy the existing customers and create new customers.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.3
• /
• pp.190-198
• /
• 2018

The Epoxy-coated Reinforcing bars have been proved to be able to extend a durability life because of its excellent corrosion resistance in bridges and structures under marine and severe environments. The usage of epoxy-coated reinforcement is continuously increasing in developed countries such as the US and Japan. However, domestic use is extremely limited due to lack of research and development, poor production facilities, low quality, increase of initial costs, and difficulty of field management. This study suggests the improvement of construction quality management such as manufacturing, transportation and construction for the field application through the test construction of the proven product in the related test results of the epoxy coated steel bars produced in the recently improved manufacturing facility.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.310-315
• /
• 2021

In the case of weapon systems used by the military, defense standards are applied for economical and efficient procurement, management, and maintenance. Defense specifications are documents describing procedures and methods for determining whether technical requirements for products and services are consistent and apply to the production of weapon systems, quality assurance, and configuration management. Software is also subject to defense specifications, and is documented and managed in the same way as other defense specifications. Sometimes it happened to be standardized without some(or all) software. In this case, a competitive contract is impossible and it may affect the quality of weapon systems because the manufacturer arbitrarily changes the software without prior approval. So, software standardization is required, but it is very difficult to verify for firmware installed in hardware. This paper proposed a verification method for g software standardization, and we expect it will contribute to the efficient production and quality assurance of weapon systems.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.11
• /
• pp.87-95
• /
• 2022

The geotechnical information constructed in the National Geotechnical Information DB System has been extensively used in design, construction, underground safety management, and disaster assessment. However, it is necessary to refine the geotechnical information because it has nearly 300,000 established cases containing a lot of missing or incorrect information. This research proposes a method for automatic quality control of geotechnical information using a fully connected neural network. Significantly, the anomalies in geotechnical information were detected using a database combining the standard penetration test results and strata information of Seoul. Consequently, the misclassification rate for the verification data is confirmed as 5.4%. Overall, the studied algorithm is expected to detect outliers of geotechnical information effectively.