• Title/Summary/Keyword: 품질검정

Search Result 518, Processing Time 0.022 seconds

Study for the Changes of Annual and Seasonal Mean Temperature Using Adjusted Temperature Data in the Republic of Korea (고품질의 기온자료를 이용한 연.계절평균기온의 변화에 관한 연구)

  • Park, Chang-Yong;Choi, Young-Eun
    • Journal of the Korean Geographical Society
    • /
    • v.46 no.1
    • /
    • pp.20-35
    • /
    • 2011
  • This study suggested the systematic steps for quality control, construction of the climatological reference series and homogeneity test and adjustment of temperature series in the Republic of Korea. It also attempted to evaluate more accurate magnitude of change using adjusted temperature data. All erroneous values produced by quality control were detected by internal inconsistency check. The method selected for homogeneity test in this study well defined fairly correct signals of station relocations. Therefore, this method might be regarded as the appropriate one to test homogeneity of temperature series of the Republic of Korea. The increase of temperature of the Republic of Korea after the adjustment were bigger than before the adjustment of annual and seasonal mean temperature. Adjusted temperature data produced by these steps will enable to evaluate more accurate characteristics and magnitude of climate change.

Study on the Food Service Industry Employees of Job Satisfaction and Quality of Service according to the Empowerment in Effect (외식기업 임파워먼트에 따른 직무만족 및 서비스품질에 미치는 영향)

  • Kim, Heon Chul
    • Culinary science and hospitality research
    • /
    • v.21 no.3
    • /
    • pp.13-28
    • /
    • 2015
  • This study analyzes how service quality is affected by individual empowerment and job satisfaction of food service industry employees. Based on preceding research, the independent variables used in this study focus on the matter of empowerment--specifically, 'autonomy', 'meaningfulness', 'respect', and 'capability'. The dependent variables are 'job satisfaction' and 'quality of service'. Based on data obtained through this study, a tentative theory is proposed: food service industry employee job satisfaction positively affects quality of service. In particular, 'autonomy' and 'meaningfulness' positively correlate with job satisfaction. However, 'respect' and 'capability' do not seem to influence job satisfaction. On the matter of 'empowerment', a tentative theory is also proposed: employee empowerment in the food service industry positively affects quality of service, with 'autonomy'(b=.257) the most significant influence, 'meaningfulness'(b=.221) the second, and 'respect'(b=.214) the third. 'Capability'(b=-.172) exhibited no correlation with quality of service. The essential finding of this study is as follows: employees' job satisfaction in the restaurant franchise domain positively affects quality of service.

The Factors Affecting on the User's Repurchase Intention in Chinese Internet Shopping Malls

  • Chung, Young-Soo;Jung, Chul-Ho;Wang, Tao;Piao, Shi-Guang
    • Proceedings of the Korea Database Society Conference
    • /
    • 2010.06a
    • /
    • pp.213-221
    • /
    • 2010
  • 정보통신 인프라의 확대 및 인터넷 사용자 수의 급속한 증가에 따라 중국 인터넷 쇼핑몰 시장은 방대한 잠재수요를 가진 새로운 시장으로 급부상하고 있다. 본 연구의 주목적은 중국 인터넷 쇼핑몰 이용자들을 대상으로 한 실증분석을 통해 인터넷 쇼핑몰 이용자의 재구매의도에 영향을 미칠 것으로 예상되는 중요한 특성요인을 도출해 보고자 하였다. 연구목적의 효과적인 달성을 위한 이론적 토대로서 정보시스템성공모델 관련 선행연구에 대한 종합적 고찰 결과를 토대로 인터넷 쇼핑몰의 정보품질, 시스템품질, 서비스품질, 고객만족, 재구매의도 등의 여섯 가지 요인을 포함한 연구모델을 구축하였고, 이들 변수들간의 상호 영향관계에 관한 가설을 수립하였다. 중국 인터넷 쇼핑몰 이용자 204명을 대상으로 한 설문조사 결과를 이용하여 공분산구조모델 분석을 통한 연구가설 검정을 실시하였다. 본 연구의 실증분석 결과를 요약해 보면 다음과 같다. 첫째, 중국 인터넷 쇼핑몰의 정보품질과 서비스품질이 고객만족에 긍정적인 영향을 미치는 반면 시스템품질은 별다른 영향을 미치지 못하는 것으로 밝혀졌다. 둘째, 인터넷 쇼핑몰 고객의 만족은 재구매의도에 긍정적인 영향을 미치는 것으로 밝혀졌다. 이상의 가설검정 결과를 토대로 본 연구에서는 연구의 시사점과 한계점 및 향후 연구방향에 관하여 논하였다.

  • PDF

Quality Characteristics of Tofu Added with Black Soybean Hull Powder (검정콩 종피 첨가 제조한 두부의 품질특성)

  • Kim, Jean;Jeon, Jeong-Ryae
    • Journal of the Korean Society of Food Culture
    • /
    • v.20 no.6
    • /
    • pp.633-637
    • /
    • 2005
  • The effects of adding hull powders of black soybean on quality characteristics of tobu were studied. Proximate composition of the black soybean hull powders was crude ash, crude protein, crude fat, and carbohydrate at 2.60, 11.35, 2.18, and 73.97%, respectively. The addition of 5% black soybean hull powder decreased the production of whey and consequently increased the yield of tobu. Texture properties of evaluation hardness, adhesiveness, chewiness were the best in tobu which was made with 5% black soybean hull powders. Sensory evaluation showed texture, firmness were not significantly different among tobu with yellow soybean, black soybean, and added to 0.5% black soybean hull powders. At the beginning of the period of storage, there were not differences of microbial cell count as increasing black soybean hull powders, but observed after passing 5 days. The results of total microbial cell count showed that adding 5% black soybean hull powders in processing tobu extend storage time.

Development plan and Inspection Status of Hydrological Measuring Instrument (수문조사기기 검정현황 및 발전방안)

  • Kim, Ji Hun;Jang, Bok Jin;Kim, Ji Chan;Jung, SungWon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.213-213
    • /
    • 2016
  • 수문조사기기의 검정은 수문조사에 활용할 기기를 일관되고 표준화된 기준으로 검사하여 수문조사에 적합한 기기인지 확인하는 것이다. 이러한 검정은 국가수문자료의 신뢰도를 높이고 유지하는 기본적이고 중요한 업무이다. 검정대상기기는 강수량측정기기, 유속측정기기, 수위측정기기, 부유사측정기기, 토양수분측정기기, 증발산량측정기기로 총 6가지이며, 2009년부터 국토교통부 위탁사업으로 한국건설기술연구원(유량조사사업단)에서 수행하고 있다. 특히 유량조사사업단에서는 유속측정기기를 제외한 나머지 5개 수문조사기기에 대해 검정을 수행하고 있다. 연도별로 2009년부터 2015년까지 98대, 334대, 572대, 539대, 359대, 682대, 690대로 총 3,274대를 검정하였고, 관측기종별로 강수량 1,579대, 수위 1,589대 부유사 23대, 토양수분 33대, 증발산량 50대이다. 신청기관별로는 국토교통부(홍수통제소) 1,847대, 환경부(국립환경과학원) 4대, 한국건설기술연구원(유량조사사업단 포함) 81대, K-water 338대, 한국수력원자력(주) 91대, 일반업체 913대에 대한 검정을 실시하였다. 검정을 실시한 강수량측정기기 1,579대 중 보정없이 합격된 기기는 1,495대, 허용오차기준에 미달되어 보정 실시 후 합격한 기기는 76대이며, 불합격 처리된 기기는 8대이다. 수위측정기기는 합격이 1,586대, 기준에 미달되어 불합격된 기기가 2대로 나타났다. 강수량측정기기의 각 연도대비 통계분석 결과 보정률은 2009년 97대 중 8대(8.2%), 2010년 194대 중 3대(1.5%), 2011년 180대 중 24대(13.3%), 2012년 175대 중 17대(9.7%), 2013년 165대 중 15대(9.1%), 2014년 547대 중 8대(1.5%), 2015년 221대 중 9대(4.1%)로 다소 낮은 수치로 나타났다. 이처럼 보정률이 낮게 나타난 이유는 관할기관의 검정을 위한 유지관리 및 사업자의 사전검사 등을 통해 감소한 것으로 판단되며, 이와 같은 결과는 수문자료의 품질 및 신뢰도 향상으로 이어졌다. 그러나 여전히 선진국에 비해 수문조사기기 검정의 중요성에 대한 인프라 구축이 미흡한 실정이다. 수문조사기기 검정의 선진국이라 할 수 있는 미국의 경우 USGS에서 HIF(Hydrogical Istrumentation Facility)라는 별도 조직을 운영하여 관측기기의 렌탈, 수리, 교정 및 검정, 개발, 교육 등 이러한 작업을 일괄 수행하고 있고 조직 내 자체 시설로 수중펌프 시험소, 자연과 유사한 환경에서 테스트 하는 장소, 대형온도챔버 등을 갖추고 있으며, 이러한 시설을 이용하여 기기의 교정 및 검정, 연구 등을 현장과 비슷한 환경에서 다양한 실험을 통해 검정방법을 비교, 분석하는 것을 볼 수 있다. 현재 우리나라의 수문조사기기는 다양한 방법으로 현장에 설치되어 검정방법의 다양성이 요구된다. 향후 우리나라도 HIF와 같이 다양하고 선진화된 시설과 기술을 개선하고 다각적인 시험 과정을 통해 수준 높은 검정방법체계를 갖추려는 노력이 필요하다.

  • PDF

하청생산에서의 구매 및 생산과업에 관한 연구

  • 이규상
    • Korean Management Science Review
    • /
    • v.6 no.2
    • /
    • pp.27-49
    • /
    • 1989
  • 본 논문은 우리나라 제조기업의 하청생산 관계에 있어서 구매와 생산시스템에 관한 연구를 대기업의 부품구입 구매과업과 중소기업의 생산과업을 각각 원가절감, 품질행상, 납기준수라 설정하고 이를 연구한 것이다. 세가지 생산과업 중 상대적으로 더 강조하는 기업을 원가절감 전략그룹, 품질향상 전략그룹, 납기준수 전략그룹이라 명명하고, 연구내용은 첫째 중소기업 생산과업과 대기업 구매과업과의 결합도를 분석하였다. 둘째 대기업의 중소기업에 대한 지원성과의 차이를, 세째 과업그룹간의 과업의 성과차이를 분석하였다. 이를 실증적으로 분석하기 위하여 서베이 조사방법을 이용하였는데, 연구대상 기업은 국내의 자동차, 전자.통신, 중장비.기계.조선업종의 세트조립 대기업에 부품과 원료를 공급하는 수급기업체 협의회 회원 중소기업으로 하였다. 중소기업의 업종은 금속, 기계, 장비 제조 및 화학, 석탄, 고무 및 프라스틱 제조인 등록 및 일반 법인이었고, 전국에서 112개 중소기업이 표본으로 추출되어 분석되었다. 연구가설들은 통계 패키지를 이용한 독립성 검정, 요인분석, 분산분석, 비모수 검정방법을 통하여 검정되었다.

  • PDF

A Quality Assessment Method of Biometrics for Estimating Authentication Result in User Authentication System (사용자 인증시스템의 인증결과 예측을 위한 바이오정보의 품질평가기법)

  • Kim, Ae-Young;Lee, Sang-Ho
    • Journal of KIISE:Computing Practices and Letters
    • /
    • v.16 no.2
    • /
    • pp.242-246
    • /
    • 2010
  • In this paper, we propose a quality assessment method of biometrics for estimating an authentication result in an user authentication system. The proposed quality assessment method is designed to compute a quality score called CIMR (Confidence Interval Matching Ratio) as a result by small-sample analysis like T-test. We use the C/MR-based quality assessment method for testing how to well draw a distinction between various biometrics in a multimodal biometric system. We also test a predictability for authentication results of obtained biometrics using the mean $\bar{X}$ and the variance $s^2$ in T-test-based CIMR. As a result, we achieved the maximum 88% accuracy for estimation of user authentication results.