• 한국정밀공학회지
• /
• 제24권9호
• /
• pp.44-51
• /
• 2007

There are many methods to assemble various parts of a product, and one of them is the bolting system widely used in a industrial field due to the merits; easiness to obtain strong tightening force, simplicity of assemble or disassemble in order to repair, substitution or cleaning, and so on. But this bolting system needs attachments not to let a bolt loose and they are an important factor to cost a great deal. In this study, some equations are suggested and FE analyses are carried out to verify the cause of the bolt looseness occurring in the tightening process. And because the number of bolts in the bolting system has been decided by empirical know-how of designers in the field, safety rate in the plate type heat exchanger is often too high. Therefore the equations to decrease in quantity are suggested in consideration of the relationship between a critical shearing force acting on the screw and a normal force acting on the cooling plate by the working fluid.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.190-200
• /
• 1991

본 연구에서는 고온에 노출되는 열-점소성 거동의 해석을 위해 소성유동, 크 리프, 응력풀림(stress relaxation)등의 거동을 동시에 다룰 수 있는 통일구성방정식 모델에 대해 논하고 적절한 모델을 선정한다. 이 모델은 미소변형이론에 근거한 것 이므로 구조물의 거동을 소변형률(small strain)과 소회전(small rotation)의 범위내 로 가정하여 해석한다.선정된 모델에 대해서 시간변화율 형태의 방정식으로부터 유 한요소법을 통한 수치화와 사용된 구성방정식을 효율적으로 처리할 수 있는 수치해석 법상의 알고리듬을 제안한다. 제안된 알고리즘을 사용하여 유한요소법 전산코드를 적상하고, 작성된 코드를 이용하여 고온에서 하중을 받는 단순보와 국부적으로 심한 가열을 받는 구조물에 적용하여 고전적인 구성방정식으로 복합적인 해석이 어려웠던 열-점소성 거동을 효과적으로 해석할 수 있음을 보인다. 본 논문은 응력해석에 주안 점을 두었으므로 열해석에 관한 상세한 논의는 가급적 생략하기로 한다.

• 한국산학기술학회논문지
• /
• 제16권4호
• /
• pp.2356-2363
• /
• 2015

본 연구는 볼트강도등급 10.9에 의해 추천되는 조임 토크 640~800(Nm)가 볼트-너트 체결체에 가해졌을 때 풀림 방지를 위한 코일 스프링의 삽입 및 시뮬레이션 기반 설계 최적화에 관한 것이다. 먼저 볼트-너트-코일스프링으로 구성된 조립체에 대하여 등가응력에 기반을 둔 구조 안전성 판단을 위한 조립체 구조해석 시뮬레이션을 수행한다. 그리고 이러한 해석 시뮬레이션 결과로부터 설계 개선안 도출을 위한 설계전략을 수립한다. 또한 이 전략 안에서 기존 설계의 성능을 개선해 나가는 반복 과정을 제안한다. 이 과정에서는 먼저 반응표면법을 사용하여 설계 파라미터 후보점을 찾고, 그 후보점의 반응값과 실제 시뮬레이션 결과를 비교함으로써 설계 후보점(코일스프링 감감수 N = 6)이 최적인지를 검증한다.

• Tribology and Lubricants
• /
• 제35권1호
• /
• pp.65-70
• /
• 2019

Self-loosening of bolts owing to external forces occurs in several machines that are clamped by bolts and nuts. This study focuses on the self-loosening of the aiming bolt of the head lamp in a vehicle. It is important to prevent the aiming bolt from self-loosening as it has a decisive effect on the angle of the head lamp. A nut clamped with a bolt, known as a retainer, is made of plastic and has a partial screw thread. In addition, a transverse load has a considerable impact on the self-loosening of a bolt. We concentrate on the self-loosening of a bolt by a transverse load. The aim of this study is to define the limits of the external force that loosen the bolt. Based on the above conditions, we derive a theoretical equation and develop a numerical analysis program that can calculate the limiting forces for self-loosening. To verify the developed program, we design a test device that can measure the self-loosening by applying sliding forces to the aiming bolt. Using this method, we can draw the following conclusions. First, the developed testing device is suitable to prove the theory for calculating the self-loosening force. Second, the equation confirms the relationship of bolt self-loosening between resistance torque and shear force. Finally, the equation obtains the minimum value of the resistance torque required to decrease the change in the angle of the head lamp, thereby improving the possibility of increasing the stability of the head lamp.

• 한국세라믹학회지
• /
• 제39권11호
• /
• pp.1090-1096
• /
• 2002

몬모릴로나이트군의 벤토나이트(BEN)와 첨가제로서 풀림제 및 음이온 계면활성제를 배합하여 6종의 수팽윤성 BEN 유동성 개질제(WSB-1~WSB-6)를 제조하였다. 제조한 WSB의 평균입경, 입자형태, 용액점도, 수팽윤성 및 첨가제에 따른 점도를 각각 측정하였고, WSB의 유동학적 거동을 레오메타를 이용하여 조사하였다. WSB-1의 점도는 pH가 낮을수록 BEN의 평균입경이 작을수록 각각 증가하였고, 풀림제로서 $Na_2CO_3$를 처리한 WSB-2의 점도가 가장 높게 나타났다. 이 결과는 WSB에 포함된 BEN 입자가 edge-to-face의 구조로 재배열이 일어나기 때문으로 해석할 수 있다. 또한 WSB에 풀림제 및 음이온 계면활성제가 포함된 WSB-4, WSB-5 및 WSB-6은 전단력에 따라 점도의 변화가 거의 없는 졸(sol)상으로 존재하지만, 음이온 계면활성제로서 Tetrasodium Pyrophosphate(TSPP)를 첨가한 WSB-3의 경우는 전단력에 따른 점도가 1000배의 차이가 남으로서 요변성(thixotropy)을 나타내었고, 이 결과로부터 TSPP의 음이온이 WSB-3에 포함된 BEN 입자의 edge에 배열된다고 설명할 수 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.636-641
• /
• 2007

This research focuses on the development of an analytical model loosening mechanism of dental implant system. The model is utilized for predictions of preload values for internal and external types of implants. It identifies the effects of various parameters such as friction, geometric factors and mechanical properties on the loosening mechanism of the implant system. The results of analytical model are compared to those of the numerical method for validation.

• 융복합기술연구소 논문집
• /
• 제2권2호
• /
• pp.20-24
• /
• 2012

In this paper, we perform a ANSYS simulation of assembly structure composed of three parts, bolt, nut, and coil spring, under the loading of a screw torque 640~800 ($N{\cdot}m$) derived from the given bolt tensile strength 10.9, which allows us to investigate a lock-nut mechanism for the prevention of bolt-loosening after three parts are fastened. And also we investigate the safety factor of each component with effective stress distribution obtained from the simulation, which enables us to estimate the structural safety of a new lock-nut structure. Both simulation and investigation shown in this paper will contribute to the development of a new lock nut structure.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1753-1762
• /
• 2000

An inverse method is presented to obtain material's flow properties by using small punch test. This procedure employs, as the objective function of inverse analysis, the balance of measured load-di splacement response and calculated one during deformation. In order to guarantee convergence to global minimum, simulated annealing method was adopted to optimize the current objective function. In addition, artificial neural network was used to predict the load-displacement response under given material parameters which is the most time consuming and limits applications of global optimization methods to these kinds of problems. By implementing the simulated annealing for optimization along with calculating load-displacement curve by neural network, material parameters were identified irrespective of initial values within very short time for simulated test data. We also tested the present method for error-containing experimental data and showed that the flow properties of material were well predicted.

• 한국압력기기공학회 논문집
• /
• 제11권1호
• /
• pp.79-86
• /
• 2015

The purpose of this study is to evaluate structural integrity of a weldment which is partially screwed and then welded. Two finite element models are constructed and solved: operating temperature and internal pressure are considered in the first simple model, and welding process and normal operating condition including heat-up process are simulated in the second model. Structural integrity assessment criteria are satisfied with both finite element models, therefore the repair weldment finely sustains structural integrity of this assembly and prevents leakage. Stresses are dramatically increased when weld residual stress is considered, but it should be considered as a secondary stress.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.281-282
• /
• 2006

Tension control performance is very important in high-speed printing machine. One of the major factors that effect to tension control performance is the process of roll changing. Even if the turret arm moves during roll changing process and the span length of the unwinding system varies, it is customary to neglect it in motion and tension control and to consider it as a disturbance. In this paper, its effect is modeled nonlinearly and compared with linear model, and an effect of an infeeder dancer is analyzed under the condition with no unwinder dancer. We verify the performance of the proposed method via simulation in the high-speed printing machine.