• Korean Journal of Remote Sensing
• /
• v.30 no.6
• /
• pp.797-807
• /
• 2014

The Sea Surface Temperature (SST) is one of the most important oceanic environmental factors in determining the change of marine environments and ecological activities. Satellite thermal infrared images can be effective for understanding the global trend of sea surface temperature due to large scale. However, their low spatial resolution caused some limitations in some areas where complicated and refined coastal shapes due to many islands are present as in the Korean Peninsula. The coastal ocean is also very important because human activities interact with the environmental change of coastal area and most aqua farming is distributed in the coastal ocean. Thus, low-cost airborne thermal infrared remote sensing with high resolution capability is considered for verifying its possibility to extract SST and to monitor the changes of coastal environment. In this study, an airborne thermal infrared system was implemented using a low-cost and ground-based thermal infrared camera (FLIR), and more than 8 airborne acquisitions were carried out in the western coast of the Korean Peninsula during the periods between May 23, 2012 and December 7, 2013. The acquired thermal infrared images were radiometrically calibrated using an atmospheric radiative transfer model with a support from a temperature-humidity sensor, and geometrically calibrated using GPS and IMU sensors. In particular, the airborne sea surface temperature acquired in June 25, 2013 was compared and verified with satellite SST as well as ship-borne thermal infrared and in-situ SST data. As a result, the airborne thermal infrared sensor extracted SST with an accuracy of $1^{\circ}C$.

• Journal of Oral Medicine and Pain
• /
• v.30 no.4
• /
• pp.401-410
• /
• 2005

The purpose of this study was to assess the effect of heat therapy on cutaneous blood flow and skin temperature at pre-auricular region. Moist heat therapy and ultrasound therapy were applied to 20 healthy subjects(male: 10, female: 10). Cutaneous blood flow and skin temperature before and after heat therapy were measured with laser doppler flowmetry and thermocouple. The results were as follows ; 1. Cutaneous blood flow and skin temperature were significantly increased after moist heat therapy and ultrasound therapy. 2. In application of moist heat therapy, cutaneous blood flow and skin temperature were more increased and maintained longer than in ultrasound therapy. 3. Before heat therapy, cutaneous blood flow and skin temperature were higher in male. 4. There was no significant gender difference in changes of cutaneous blood flow and skin temperature after heat therapy. In conclusion, both moist heat therapy and ultrasound therapy increased cutaneous blood flow and skin temperature significantly, and moist heat therapy was more effective to increase cutaneous blood flow and skin temperature and to maintain increased cutaneous blood flow and skin temperature. There was no significant gender difference in the effect of heat therapy on cutaneous blood flow and skin temperature.

• Journal of Oral Medicine and Pain
• /
• v.31 no.1
• /
• pp.47-57
• /
• 2006

The purpose of this study was to assess the effects of the superficial heat therapy on the cutaneous blood flow and the skin temperature at pre-auricular region. Two types of the superficial heat therapy-moist hot pack & infrared lamp- were applied to 20 healthy subjects(male: 10, female: 10). For each subject, the two parameters of cutaneous blood flow and skin temperature were measured before and after heat therapy, using laser doppler flowmetry(LDF). The author analyzed the differences of the effects between the two therapies and also characteristics of responsiveness between the two parameters. The results were as follows : 1. The two parameters were significantly increased after both superficial heat therapies. 2. Skin temperature showed a maximum peak immediately after both superficial heat therapies, but cutaneous blood flow showed a maximum peak 4 minutes after both superficial heat therapies. 3. Increased cutaneous blood flow after application of moist hot pack lasted longer than infrared lamp. 4. Increased skin temperature after both superficial heat therapies lasted for 60 minutes, but increased skin temperature after infrared lamp decreased more rapidly than moist hot pack. 5. Amount of changes in cutaneous blood flow after infrared lamp was larger in female than in male, but no significant gender difference was found since 20 minutes after infrared lamp. Both moist hot pack and infrared lamp showed favorable effectiveness in raising cutaneous blood flow and skin temperature. Moist hot pack was slightly superior in maintaining this effect.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.663-664
• /
• 2016

Temperature difference power generation using sea water is a method repeatedly closed liquefaction and gasification by using the ammonia (refrigerant) of the deep sea water and surface water with a temperature difference between turning the turbine. The larger the temperature difference between the nature of the temperature characteristic energy generation development, the better. This is the story that the surface waters of the deep-water temperature difference is large. But the winter is not large temperature difference between surface water and deep water has lowered energy efficiency. And desalination technologies accounted for 97% of the earth, but we can not eat the technology to convert sea water into fresh water, fresh water produced by the desalination technology that is available for various industries such as irrigation, drinking water in the vessel.In this paper, LNG transport vessels, based on the LNG transport ship to the temperature difference power generation using cold energy of thermal energy and LNG marine diesel engines, which use the existing order to improve the temperature of the surface waters of the season that is the current problem we propose that a complex development of desalination and desalination of seawater freezing research into hybrid research and utilizing the cold energy of the engine.

• Journal of Energy Engineering
• /
• v.8 no.4
• /
• pp.567-575
• /
• 1999

This study found potential ability to generate electric power using difference in water temperature between sea surface water and deep water in the East Sea which includes the East Sea Proper Water with the temperature less than 1$^{\circ}C$ throughout a year without seasonal variation. To quantify the difference in water temperature between sea surface water and deep water in the East Sea. We computed the annual mean ($^{\circ}C$), the annual amplitude ($^{\circ}C$), the annual phase (degree) and the duration time which showed more than 15$^{\circ}C$ temperature difference from the water temperature data using Harmonic analysis during 1961~1997. The best place for generating electric power in the East Sea seems to be the eastward ocean areas (36$^{\circ}$ 05'N, 129$^{\circ}$ 48'E~36$^{\circ}$ 05'N, 130$^{\circ}$ 00E'E) from Pohang city. The annual mean of the difference in water temperature between sea surface water and 500 m depth was 24$^{\circ}$C at the place to generate electric power in August according to the data of 1961~1997. the maximum duration periods with more than 15$^{\circ}C$ temperature difference were 215 days (5/5-12/10) a year in the place mentioned electricity with a stable plan. In the East Sea coastal areas of the Korean peninsula, the average minimum depth to reach the East Sea Proper Water from surface water is 300 m and fluctuates between 250 m and 350 m throughout a year. Further studies could be needed for the utilization of cold water, such as the East Sea Proper Water for energy conversion.

• Korean Journal of Remote Sensing
• /
• v.24 no.4
• /
• pp.273-287
• /
• 2008

Characteristics of skin-bulk sea surface temperature (SST) differences in the Northeast Asia seas were analyzed by utilizing 845 collocated matchup data between NOAA/AVHRR data and oceanic in-situ temperature measurements for selected months from 1994 to 2003. In order to understand diurnal variation of SST within a few meters of the upper ocean, the matchup database were classified into four categories according to day-night and drifter-shipboard measurements. Temperature measurements from daytime drifters showed a good agreement with satellite MCSST (Multi-Channel Sea Surface Temperature) with an RMS error of about $0.56^{\circ}C$. Poor accuracy of SST with an rrns error of $1.12^{\circ}C$ was found in the case of daytime shipboard CTD (Conductivity, Temperature, Depth) measurements. SST differences between MCSST and in-situ measurements are caused by various errors coming from atmospheric moist effect, coastal effect, and others. Most of the remarkable errors were resulted from the diurnal variation of vertical temperature structure within a few meters as well as in-situ oceanic temperatures at different depth, about 20 cm for a satellite-tracked drifting buoy and a few meters for shipboard CTD or moored buoy. This study suggests that satellite-derived SST shows significant errors of about ${\pm}3^{\circ}C$ in some cases and therefore it should be carefully used for one's purpose on the base of in-depth understanding of skin-bulk SST difference and vertical temperature structure in regional sea.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.27-35
• /
• 2017

Human activity such as agriculture, industrial development and urban sprawl has been the major threat to wetlands ecosystem, which have caused the greatest losses of coastal wetlands. The Garorim bay provides one of the most important wetland habitate and Ministry of Oceans and Fisheries designated Garorim bay to marine ecosystem protected area in July 2016. The purpose of this research is to analysis the spatial pattern of Garorim bay using Landsat 5 (TM), Landsat 7 (ETM+), Landsat 8 (OLI & TIRS). The surface temperature and NDVI of Garorim bay were processed with spatial analysis method and time series analysis were applied to 25 years Landsat satellite 19 images. The results of time series distribution map compared with the several wetland habitate on remotely sensed images. Landsat images showed the change area of wetland vegetation distribution from 1988 to 2014. The southern part habitate of Garorim bay have been changed with vegetation patterns on coastal wetland which were covered with tidal flat.

• Journal of the Korean earth science society
• /
• v.41 no.6
• /
• pp.617-629
• /
• 2020

Sea surface temperature (SST), which plays an important role in climate change and global environmental change, can be divided into skin sea surface temperature (SSST) observed by satellite infrared sensors and the bulk temperature of sea water (BSST) measured by instruments. As sea surface temperature products distributed by many overseas institutions represent temperatures at different depths, it is essential to understand the relationship between the SSST and the BSST. In this study, we constructed an observation system of infrared radiometer onboard a marine research vessel for the first time in Korea to measure the SSST. The calibration coefficients were prepared by performing the calibration procedure of the radiometer device in the laboratory prior to the shipborne observation. A series of processes were applied to calculate the temperature of the layer of radiance emitted from the sea surface as well as that from the sky. The differences in skin-bulk temperatures were investigated quantitatively and the characteristics of the vertical structure of temperatures in the upper ocean were understood through comparison with Himawari-8 geostationary satellite SSTs. Comparison of the skin-bulk temperature differences illustrated overall differences of about 0.76℃ at Jangmok port in the southern coast and the offshore region of the eastern coast of the Korean Peninsula from 21 April to May 6, 2020. In addition, the root-mean-square error of the skin-bulk temperature differences showed daily variation from 0.6℃ to 0.9℃, with the largest difference of 0.83-0.89℃ at 1-3 KST during the daytime and the smallest difference of 0.59℃ at 15 KST. The bias also revealed clear diurnal variation at a range of 0.47-0.75℃. The difference between the observed skin sea surface temperature and the satellite sea surface temperature showed a mean square error of approximately 0.74℃ and a bias of 0.37℃. The analysis of this study confirmed the difference in the skin-bulk temperatures according to the observation depth. This suggests that further ocean shipborne infrared radiometer observations should be carried out continuously in the offshore regions to understand diurnal variation as well as seasonal variations of the skin-bulk SSTs and their relations to potential causes.

• Korean Journal of Remote Sensing
• /
• v.32 no.6
• /
• pp.589-601
• /
• 2016

Sea surface currents were estimated by applying the Maximum Cross Correlation (MCC), Zero-mean Sum of Absolute Distances (ZSAD), and Zero-mean Sum of Squared Distances (ZSSD) algorithms to Himawari-8/Advanced Himawari Imager (AHI) thermal infrared channel data, and the comparative analysis was performed between the results of these algorithms. The sea surface currents of the Kuroshio Current region that were retrieved using each algorithm showed similar results. The ratio of errors to the total number of estimated surface current vectors had little difference according to the algorithms, and the time required for sea surface current calculation was reduced by 24% and 18%, relative to the MCC algorithm, for the ZSAD and ZSSD algorithms, respectively. The estimated surface currents were validated against those from satellite-tracked surface drifter and altimeter data, and the accuracy evaluation of these algorithms showed results within similar ranges. In addition, the accuracy was affected by the magnitude of brightness temperature gradients and the time interval between satellite image data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.77-85
• /
• 1992

Layer material properties of asphalt concrete changes with climatic conditions. Pavement design and analysis should be performed in the representative climatic condition that gives standard physical properties of pavement layer materials. In this study, an evaluation procedure of pavement design temperature is proposed and programed based on damage effect analysis using fatigue failure criterion. Three regions, Seoul, Daegeon, and Pusan, are chosen to obtain the representative climatic data of South Korea. Domestic pavement design temperature is developed by applying the proposed algorithm to 6 domestic pavement section models with the respective regional climatic data. Asphalt concrete pavement failure criterion is also proposed for the condition of developed domestic pavement design temperature. The design temperature for the region of South Korea is estimated as $l7^{\circ}C$, which is converted to $23.6^{\circ}C$ for the AC surface layer temperature. It is found that the procedure to determine design properties of AC surface layer material at $20^{\circ}C$ gives overestimated results of AC moduli for the domestic pavement system. From the comparison study, it is also found that the estimated pavement design temperature is similar to the result of SHELL Design Chart.