• Analytical Science and Technology
• /
• v.20 no.6
• /
• pp.508-515
• /
• 2007

Age determination was carried out with the bricks relating to Muryong Royal Tomb of the Baekje Kingdom, for which there is no information on the external gamma dose rate, by using the subtraction method of luminescence dating. In the subtraction method, each paleodose for fine grain and for quartz inclusion is required for the sample to be dated. In this study, the paleodose for the fine grain was estimated by thermoluminescence measurement and the paleodose for the quartz inclusion was determined using optically stimulated luminescence. The resultant ages among the bricks showed good agreement with standard deviation of 6 % error. Finally the bricks relating to Muryong Royal Tomb were evaluated as AD $530{\pm}50yrs$($1{\sigma}$ SD).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.195-202
• /
• 1998

In this study, we utilized various type of GPS observation measurements to get a camera projection center of the aerial triangulation and consequently to determine which type is acceptable. For the accuracy and the error analysis, comparison between a projection center from the conventional model adjustment and the result determined by the kinematic DGPS positioning which is fitted to the conventional model adjustment using 3D conformal transformation method has been made. The camera projection center is located within a $\pm{2m}$ for C/A code range measurements, $\pm{14cm}$ for L1 phase measurements and $\pm{10cm}$ for L1/L2 phase measurements with $1\sigma$. In this way, the accuracy of the camera projection center by the bundle block adjustment can be predicted.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.1
• /
• pp.11-19
• /
• 2013

As the temperature data show a distribution pattern with a number of peaks, assumption of normal distribution will result in a serious bias in the analysis. In this study, the Gaussian Mixture Distribution (GMD), a type of bimodal distribution, is presumed as a frequency distribution for the water temperature, in order to estimate the optimal parameter and to carry out the relation analysis between the optimal parameter and the basic statistical information such as mean and variance on the data. By the way, an estimation formulae to compute the frequency distribution of the data is developed by computing the parameters of GMD (i.e. ${\alpha}_1$, ${\mu}_1$, ${\sigma}_1$, ${\alpha}_2$, ${\mu}_2$, ${\sigma}_2$) by means of the major characteristic values, such as mean, standard deviation and skewness of the data. The formulae shows an excellent coincidence with the result from the observation data, in the RMS limit accuracy of 5%.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.2
• /
• pp.30-39
• /
• 2009

Extraction of glomeruli region plays a very important role for diagnosing nephritis automatically. However, it is not easy to extract glomeruli region correctly because the difference between glomeruli region and other region is not obvious, simultaneously unevennesses that is brought in the sampling process and in the imaging process. In this study, a new method for extracting renal glomeruli region using genetic algorithm is proposed. The first, low and high resolution images are obtained by using Laplacian-Gaussian filter with ${\sigma}=2.1$ and ${\sigma}=1.8$, then, binary images by setting the threshold value to zero are obtained. And then border edge is detected from low resolution images, the border of glomeruli is expressed by a closed B-splines' curve line. The parameters that decide the closed curve line with this low resolution image prevent the noises and the border lines from breaking off in the middle by searching using genetic algorithm. Next, in order to obtain more precise border edges of glomeruli, the number of node points is increased and corrected in order from eight to sixteen and thirty two from high resolution images. Finally, the validity of this proposed method is shown to be effective by applying to the real images.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.8
• /
• pp.975-981
• /
• 2013

A robust optimization is only one of the ways to minimize the effects of variances in design variables on the objective functions at the preliminary design stage. To predict the variances and to formulate the probabilistic constraints are the most important procedures for the robust optimization formulation. Though several methods such as the process capability index and the six sigma technique were proposed for the prediction and formulation of the variances and probabilistic constraints, respectively, there are few attempts using a percent defective which has been widely applied in the quality control of the manufacturing process for probabilistic constraints. In this study, the robust optimization for a lower control arm of automobile vehicle was carried out, in which the design space showing the mean and variance sensitivity of weight and stress was explored before robust optimization for a lower control arm. The 2nd order Taylor expansion for calculating the standard deviation was used to improve the numerical accuracy for predicting the variances. Simplex algorithm which does not use the gradient information in optimization was used to convert constrained optimization into unconstrained one in robust optimization.

• Journal of Yeungnam Medical Science
• /
• v.6 no.1
• /
• pp.109-119
• /
• 1989

We measured fasting serum angiotensin -converting enzyme (SACE) in 100 healthy controls and 75 coal worker's pneumoconiosis (CWP) patients by a commercial kits($ACEcolor^{(R)}$, Fujirio Inc., Japan) and evaluated this manual method. The linear range extends to an activity of 80U/L. Precision on a commercial control serum (ACE control-$N^{(R)}$, Sigma Co.)with a mean value, of 9.47U/L yielded a within-run and between-run CVs are 5.6% (N=15) and 6.9% (N=14) respectively. SAVE in 75 CWP was $20.3{\pm}5.7U/L$ ($mean{\pm}s.d.$) ; higher than in healthy controls ($13.4{\pm}3.9U/L$, P<0.01). No correlation was found between SACE, sex, and age. The results suggest that the measurement of SACE and follow-up SACE in coal workers may be a useful diagnostic fools for CWP.

• Applied Microscopy
• /
• v.33 no.3
• /
• pp.195-204
• /
• 2003

The Experimental calibration method has been investigated to correct d-spacing estimation and to identify phases in the electron diffraction data acquired by imaging plates. When the diffraction data from the imaging plate was corrected by the d-spacing calibration method with the radial intensity distribution plotting in this experiment, The accuracy of d-spacing estimation was significantly increased in errors of about 0.5%. The experimental calibration equation followed up the first order exponential decay function was derived from the trace of d-spacing deviation between the measured and the calculated values. It was applied to the analysis of d-spacing and the phase identification of the transitional phases formed from [001] gibbsite specimen by electron beam irradiation effect. In this case more accurate phase identification and d-spacing evaluation is possible for the transitional phases whose diffraction patterns are complicatedly superimposed. It is concluded that ${\chi}$-alumina, ${\gamma}$-alumina and ${\sigma}$-alumina are clearly identified as the major transitional phases formed from gibbsite by electron beam irradiation for 120 min.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.6
• /
• pp.1349-1356
• /
• 1994

The results of laboratory experiments on the clear-water scour of cohesionless bed sediment for three types of pier shape were presented. According to the experimental data, the local scouring around the pier was initiated at $V/V_c=0.4{\sim}0.5$ and $Fr_p{\fallingdotseq}0.2$, and the relative local scour depths linearly increased with respect to the velocity ratio and the pier Froude number. The relative scour depth had the linear relationship with ${\tau}_r$ for ${\tau}_r$ < $10^{-4}$, but it tends to become constant for ${\tau}_r$ > $10^{-4}$, irrespective of ${\tau}_r$. And also the relative scour depths showed the close relationship with both the geometric standard deviation and the pier shape.

• Analytical Science and Technology
• /
• v.26 no.3
• /
• pp.165-173
• /
• 2013

To establishment of PT Program for Indoor air quality field that manufacture of confidential development PTMs (proficiency testing materials) and examined of proficiency testing evaluation included sampling process whether or not that is valid. Confirmation of homogeneity and stability of PTMs prepared. PTMs were confirmed to be homogeneous enough to be used as proficiency testing materials since withinbottle homogeneities of the RMs were lower than 0.3 times of targeted standard deviation of proficiency testing. The result of this study showed that the Robust RSD of proficiency testing for VOCs (volatile organic compounds) appeared 23~43% in concentration of 50~320 ${\mu}g/m^3$ for Method A(Distribution by adsorption in Tenax-tube of VOCs), but less 13~42% in concentration of 200~1200 ${\mu}g/m^3$, 16~31% in concentration of 100~450 ${\mu}g/m^3$ for Method B (distribution by VOCs of gas phase in 10L Tedalr bag), C (directly sampling of cylinder with high pressure) respectively. The result of this study showed that method C with sampling is most adequate to the proficiency testing for VOCs in indoor air.

• Geophysics and Geophysical Exploration
• /
• v.19 no.1
• /
• pp.1-10
• /
• 2016

The hypocenter distribution of microseismic events generated by hydraulic fracturing for shale gas development provides essential information for understanding characteristics of fracture network. In this study, we evaluate how inaccurate velocity models influence the inversion results of two widely used location programs, hypoellipse and hypoDD, which are developed based on an iterative linear inversion. We assume that 98 stations are densely located inside the circle with a radius of 4 km and 5 artificial hypocenter sets (S0 ~ S4) are located from the center of the network to the south with 1 km interval. Each hypocenter set contains 25 events placed on the plane. To quantify accuracies of the inversion results, we defined 6 parameters: difference between average hypocenters of assumed and inverted locations, $d_1$; ratio of assumed and inverted areas estimated by hypocenters, r; difference between dip of the reference plane and the best fitting plane for determined hypocenters, ${\theta}$; difference between strike of the reference plane and the best fitting plane for determined hypocenters, ${\phi}$; root-mean-square distance between hypocenters and the best fitting plane, $d_2$; root-mean-square error in horizontal direction on the best fitting plane, $d_3$. Synthetic travel times are calculated for the reference model having 1D layered structure and the inaccurate velocity model for the inversion is constructed by using normal distribution with standard deviations of 0.1, 0.2, and 0.3 km/s, respectively, with respect to the reference model. The parameters $d_1$, r, ${\theta}$, and $d_2$ show positive correlation with the level of velocity perturbations, but the others are not sensitive to the perturbations except S4, which is located at the outer boundary of the network. In cases of S0, S1, S2, and S3, hypoellipse and hypoDD provide similar results for $d_1$. However, for other parameters, hypoDD shows much better results and errors of locations can be reduced by about several meters regardless of the level of perturbations. In light of the purpose to understand the characteristics of hydraulic fracturing, $1{\sigma}$ error of velocity structure should be under 0.2 km/s in hypoellipse and 0.3 km/s in hypoDD.