• Fire Science and Engineering
• /
• v.26 no.6
• /
• pp.99-108
• /
• 2012

These days, spontaneous ignition phenomena by oxidizing heat frequently occur in the circumstances of processing and storing waste tires. Therefore, to examine the phenomena, in this work, this researcher conducted the tests of fires of fragmented waste tires (shredded tire), closely investigated components of the fire residual materials collected in the processing and storing place, and analyzed the temperature of the starting of the ignition, weight loss, and heat of reaction. For the study, this researcher conducted fire tests with fragmented waste tires in the range of 2.5 mm to 15 mm, whose heat could be easily accumulated, and performed heat analysis through DSC and TGA, DTA, DTG, and GC/MS to give scientific probability to the possibility of spontaneous ignition. According to the tests, at the 48-hour storage, rapid increase in temperature ($178^{\circ}C$), Graphite phenomenon, smoking were observed. And the result from the DTA and DTG analysis showed that at $166.15^{\circ}C$, the minimum weight loss occurred. And, the result from the test on the waste tire analysis material 1 (Unburnt) through DSC and TGA analysis revealed that at $180^{\circ}C$ or so, thermal decomposition started. As a result, the starting temperature of ignition was considered to be $160^{\circ}C$ to $180^{\circ}C$. And, at $305^{\circ}C$, 10 % of the initial weight of the material reduced, and at $416.12^{\circ}C$, 50 % of the intial weight of the material decreased. The result from the test on oxidation and self-reaction through GC/MS and DSC analysis presented that oxidized components like 1,3 cyclopentnadiene were detected a lot. But according to the result from the heat analysis test on standard materials and fragmented waste tires, their heat value was lower than the basis value so that self-reaction was not found. Therefore, to prevent spontaneous ignition by oxidizing heat of waste tires, it is necessary to convert the conventional process into Cryogenic Process that has no or few heat accumulation at the time of fragmentation. And the current storing method in which broken and fragmented materials are stored into large burlap bags (500 kg) should be changed to the method in which they are stored into small burlap bags in order to prevent heat accumulation.

• The Korean Journal of Elementary Counseling
• /
• v.10 no.2
• /
• pp.167-184
• /
• 2011

This study has investigated how five peer status groups that were selected by a social skills scale exhibit different peer relationship problems by means of averages, standard deviations, and profile analysis. Social skills scale developed by Yi-Hwan Ahn(2007) and the inventory of peer relationships by Hae-Won Jung(2007) were administered to 551 fifth and sixth graders in 9 elementary schools located in Gyungnam province, and averages and standard deviations of 5 peer status groups' peer relationship problems were explored. Also in order to see if differences exist among 8 sub-scales in the inventory of peer relationships according to the peer status, an average profile of scores was represented by a graph and multivariate analysis was carried out. The main results of the study are as follows. First, statistical analysis of 551 cases included in the study showed the children were distributed into the Average group(319, 57.9%), the Popular group(111, 29.1%), the Rejected group(70, 12.9%), the Controversial group(41, 7.4%), and the Neglected group(10, 1.8%), in that order. Second, as a result of comparing average scores for each measure in the inventory of peer relationships according to the peer status group, a significant difference was found to exist according to a child's peer status. The Popular group showed the lowest scores in Too Controlling, Hard to be Supportive, the Cold, and Non-Assertive among the 5 peer status groups whereas the Rejected group showed the highest scores in Social Avoidant, Non-Assertive, and Too Responsible. Third, marked differences according to the peer status group were found. The Popular group showed the lowest profile among the peer status groups whereas the Rejected group had the highest profile. In the sub-scales of the peer relationship problems, the Rejected children showed a significantly higher level of Socially Avoidant and Non-Assertiveness in comparison to the Popular children, which implies the Popular children group has lower levels of peer relationship problems than the other groups.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5254-5260
• /
• 2012

The purpose of this study is to find the relationship between lumber Herniated Nuclesus Pulposus of specific part and fat infiltration in paraspinal muscle. Also we intended to find the relationship between Body Mass Index(BMI) and fat infiltration ratio in the lumber paraspinal muscle based on the sexes of patients. We conducted this study of patients who visited our hospital from May, 2010 to May, 2012. The subjects are composed of 40 patients(20 females and 20 males), who are 30 to 50 years old suffering from severe lumber herniated nuclesus pulposus, who had or were going to have operation treatment. BMI is measured through anthropometry of each patient and fat infiltration inside the muscle is estimated by measuring the cross section area of lumbar paraspinal muscle from mid-cross section of disc(L2-S1) and fat infiltration ratio. The data of this study are analyzed by independent t-test to figure out the difference of fat infiltration between male and female, and by paired sample T-test after getting mean and standard deviation to find the changes of fat infiltration of lumbar on each level. Also correlation analysis is done by setting age as a control variable to find the correlation between BMI and fat infiltration of the whole lumbar. As a result, we could get only the meaningful difference between the sexes on upper lumber part(L2-L3) while we couldn't find any significant difference in the rest of lumbar(L3-S1). Besides, the changes of fat infiltration ratio on each lumbar level increased rapidly from lumbar 3,4 to lumbar 4,5. We also found that there is no correlation between fat infiltration ratio of lumbar paraspinal muscle(L2-S1) and BMI.

• Journal of the Korean Society of Radiology
• /
• v.11 no.5
• /
• pp.379-385
• /
• 2017

This study identifies the optimal tube voltages depending on the changes in the patient's body type for limb tests using a digital radiography (DR) system. For the upper-limp test, the dose area product (DAP) was fixed at $5.06dGy{\ast} cm^2$, and for the lower-limb test, the DAP was fixed at $5.04dGy{\ast} cm^2$. Afterwards, the tube voltage was changed to four different stages and the images were taken three times at each stage. The thickness of the limbs was increased by 10 mm to 30 mm to change in the patient's body type. For a quantitative evaluation, Image J was used to calculate the contrast to noise ratio (CNR) and signal to noise ratio (SNR) among the four groups, according to the tube voltage. For statistical testing, the statistically significant differences were analyzed through the Kruskal-Wallis test at a 95% confidence level. For the qualitative analysis of the images, the pre-determined items were evaluated based on a 5-point Likert scale. In both upper-limb and lower-limb tests, the more the tube voltage increased, the more the CNR and SNR of the images decreased. The test on the changes depending on the patient's body shape showed that the more the thickness increased, the more the CNR and SNR decreased. In the qualitative evaluation on the upper limbs, the more the tube voltage increased, the more score increased to 4.6 at the maximum of 55kV and 3.6 at 40kV, respectively. The mean score for the lower limbs was 4.4, regardless of the tube voltage. The more either the upper or lower limbs got thicker, the more the score generally decreased. The score of the upper limps sharply dropped at 40kV, whereas that of the lower limps sharply dropped at 50kV. For patients with a standard thickness, the optimized images can be obtained when taken at 45kV for the upper limbs, and at 50kV for the lower limbs. However, when the thickness of the patient's limbs increases, it is best to set the tube voltage at 50 kV for the upper limbs and at 55 kV for the lower limbs.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.2
• /
• pp.109-117
• /
• 2017

Objectives: The purpose of this study was to evaluate the change of body shape and the patient alignment state during image-guided volumetric modulated arc therapy in head and neck cancer patients, Materials and Methods: We performed a image-guided volumetric modulated arc therapy plan for 89 patients with head and neck cancer who underwent curative radiotherapy. Ten of them were evaluated for set up error. The landmarks of the ramus, chin, posterior neck, and clavicle were specified using ARIA software (Offline review), and the positional difference was analyzed. Results: The re-CT simulation therapy was performed in 60 men with $17{\pm}4$ cycles of treatment. The weight loss rate was $-6.47{\pm}3.5%$. 29 women performed re-CT simulation at $17{\pm}5$ cycles As a result, weight loss rate was $-5.73{\pm}2.7%$. The distance from skin to C1, C3, and C5 was measured, and both clavicle levels were observed to measure the skin shrinkage changes. The skin shrinkage standard deviations were C1 (${\pm}0.44cm$), C3 (${\pm}0.83cm$), and C5 (${\pm}1.35cm$), which is about 1 mm shrinkage per 0.5 kg reduction. Skin shrinkage according to the number of treatments was 1 ~ 4 fractions (no change), 5 ~ 13 fractions (-2 mm), 14 ~ 22 fractions (-4 mm) and 23 ~ 30 fractions (-6 mm). Conclusion: When the body shape changes about 5 mm, the central dose starts to differ about 3 % or more. Therefore, the CT simulation treatment for the adaptive therapy should be additionally performed. In addition, it is necessary to actively study the CT simulation therapy method and set up method of the lower neck and to examine the use of a new immobilization device.

• Journal of Broadcast Engineering
• /
• v.20 no.2
• /
• pp.310-339
• /
• 2015

In this paper, the possibility of a terrestrial fixed 4K UHD (Ultra High Definition) and mobile HD (High Definition) convergence broadcasting service through a single channel employing the FEF (Future Extension Frame) multiplexing technique in DVB (Digital Video Broadcasting)-T2 (Second Generation Terrestrial) systems is examined. The performance of such a service is also investigated. FEF multiplexing technology can be used to adjust the FFT (fast Fourier transform) and CP (cyclic prefix) size for each layer, whereas M-PLP (Multiple-Physical Layer Pipe) multiplexing technology in DVB-T2 systems cannot. The convergence broadcasting service scenario, which can provide fixed 4K UHD and mobile HD broadcasting through a single terrestrial channel, is described, and transmission requirements of the SHVC (Scalable High Efficiency Video Coding) technique are predicted. A convergence broadcasting transmission system structure is described by employing FEF and transmission technologies in DVB-T2 systems. Optimized transmission parameters are drawn to transmit 4K UHD and HD convergence broadcasting by employing a convergence broadcasting transmission structure, and the reception performance of the optimized transmission parameters under AWGN (additive white Gaussian noise), static Brazil-D, and time-varying TU (Typical Urban)-6 channels is examined using computer simulations to find the TOV (threshold of visibility). From the results, for the 6 and 8 MHz bandwidths, reliable reception of both fixed 4K UHD and mobile HD layer data can be achieved under a static fixed and very fast fading multipath channel.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.16-21
• /
• 2017

In this paper, a Small-sized and planer resonator design of Magnetic Resonance - Wireless Power Transfer(MR-WPT) were proposed for practical applications of mobile devices, such as a laptop, a smart-phone and a tablet pc. The proposed MR-WPT system were based on four coil MR-WPT and designed as a transmitter part (Tx) and a receiver part (Rx) both are the same shape with the same loop and resonator. There are four different spiral coil type of resonators with variable of line length, width, gap and turns in $50mm{\times}50mm$ size. The both of top and bottom side of substrate(acrylic; ${\varepsilon}_r=2.56$, tan ${\delta}=0.008$) ere used to generate high inductance and capacitance in limited small volume. Loops were designed on the same plane of resonator to reduce their volume, and there are three different size. The proposed MR-WPT system were fabricated with two acrylic substrate plane of Tx and Rx each, the Rx and Tx loops and resonators were fabricated of copper sheets. There are 12 combinations of 3 loops and 4 resonators, each combination were measured to calculate transfer efficiency and resonance frequency in transfer distance from 1cm to 5cm. The measured results, the highest transfer efficiency was about 70%, and average transfer efficiency was 40%, on the resonance frequency was about 6.78 MHz, which is standard band by A4WP. We proposed small-sized and planer resonator of MR-WPT and showed possibility of mobile applications for small devices.

• Journal of Hospice and Palliative Care
• /
• v.13 no.1
• /
• pp.13-23
• /
• 2010

Purpose: This study was to identify the role of general hospice palliative nurse through job analysis (duties, task, and task elements). Methods: The sample consisted of 136 nurses or professors who were performing duties related to hospice care areas in Korea. A survey method was used, and the questionnaire included frequencies, criticality, and difficulties of task elements in job description by the DACUM method. Descriptive statistics were performed by using SPSS WIN 17.0. Results: The job description of general hospice palliative nurse was identified 8 duties, 36 tasks, and 137 task elements. As for the 8 duties, the average scores of frequency, criticality, and difficulty were 2.94, 3.66, and 2.80, respectively. The role of ‘pain assessment’ was the most important task element among frequency and criticality. The lowest score at the frequency and criticality were ‘manage public finance’ and ‘collect datum through diagnostic test & lab', respectively. Furthermore, the role of 'identify spiritual needs of patients and family' was the most difficult task, whereas the role of 'manage documents and information' was the least. Conclusion: In this study, we could recognize the reality of general hospice palliative nurse's performances. For general hospice palliative nurse, therefore, concrete practice guide lines of psychosocial and spiritual care, communication skills, and bereavement care with qualifying system are critically needed.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.279-288
• /
• 2007

Today, design is not free from fashion, which emerges and vanishes temporarily, and aims at equalization. As a result, products quickly become obsolete because of fashion. This means that the span of products is determined by a social concept, which is not clarified, regardless of their functions. Usable products will gradually disappear from us and it will cause serious environmental problems, unless we can find out measures against fashion. As such, it is important to study the characteristics of the shaker's design in this circumstance. The Shaker's community has a distinguishable difference from other general societies. Temporary fashion and misled information cannot interfere with their consciousness. Religion, the life and the principle of design have developed on the same level in their community. Especially, any decoration or the difference of materials is not allowed in shaker's design. It reflects their thinking that all people are equal in the sight of God. Therefore, any decoration for social and economical superiority can not be used. Through this consciousness, they can be free from fashion or decoration. They, also, believe that they can reach perfection through practicality and simplicity. The reason why shaker's design is not disturbed by fashion is that their belief is involved in their design. Consequently, if religious or conscious contents are primarily set up, design can be free from fashion and products can be used for a long time.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.2
• /
• pp.339-348
• /
• 2004

This study was peformed to assess the relationships among bone mineral density (BMD), Physiological characteristics and lifestyle factors in 61 premenopausal working women aged 30∼49 y in Busan. The BMDs of the lumbar spines (Ll∼L4), femoral necks (FN), ward's triangles (WT) and trochanters (TC) were measured by dual energy X-ray absorptiometry. Data for physiological characteristics and physical activity was assessed by questionnaire and usual intakes of coffee, green tea, alcohol, Coca cola by food frequency questionnaire. The BMDs of L14, FN, WT and TC were 1.02 g/$\textrm{cm}^2$, 0.76 g/$\textrm{cm}^2$,0.69 g/$\textrm{cm}^2$ and 0.66 g/$\textrm{cm}^2$respectively The BMD of FN was assessed as osteopenia by T-score. The BMD of WT was positively correlated with age of monarch (p<0.05) and the BMD of Ll4 was positively correlated with delivery number (p<0.05). The BMD of Ll4 was positively correlated with hours of outdoor activity per weekend and week (p<0.05, p<0.05). The BMDs of FN and WT (p<0.05, p<0.05) were positively correlated with intake of green tea per month and the BMD of FN (p<0.05) was positively correlated with intake of wine per month. But the BMD of Ll (p<0.05) was negatively correlated with intake of Coca cola per month. So nutritional education for increasing hours of outdoor activity and decreasing intake frequency of beverage contributing to diminishment of bone mineral density is needed for premenopausal working women to prevent osteoporosis.