• Korean Journal of Construction Engineering and Management
• /
• v.11 no.3
• /
• pp.125-133
• /
• 2010

Although work-efficiency of construction machinery is a critical factor for estimating its workable-quantity perunit time, the efficiency figure table presented in the Poom-Sam that is used for Construction Cost Estimation of public sectors in Korea is very subjective for practical usage. In order to suggest objective work-efficiency table for a Pump-Dredger, domestic and overseas documentary records were investigated and on-going construction sites were also visited. Moreover, actual work quantities collected from the site visits were compared with the ones calculated based on the Standard Measurement Methods used in Japan. The research found that the table can be revised by means of detailing down by several factors, namely project type, depth of soil, undersea-site shape, and condition on the sea for better estimation of its workable-quantity. The research will be the foundation for applying the rapid development of Construction Equipment and technology to the appropriate cost estimations and the ground work of related studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.133-139
• /
• 2016

In order to obtain a reasonable value for the thermal load to use in designs, a bridge specimen of a full-size steel box girder (bridge) was manufactured. The temperature data were measured at 21 points in the bridge specimen and 19 points in the steel box bridge. The steel box bridge specimen was installed in a similar direction to a nearby real one. The maximum effective temperatures in the bridge specimen and bridge were calculated for air temperatures in the range of $24^{\circ}C{\sim}38^{\circ}C$. The maximum effective temperature of the bridge specimen and bridge showed correlations of approximately 93.2% and 87.4%, respectively, compared with the Euro code. The maximum effective temperature calculated in this study was very close to the Euro code and the maximum temperature of the Highway Bridge Design Criteria. When the effective temperature obtained in the study is combined with the highest temperature calculated from the Contour map for each region, the design criteria for the thermal load in domestic bridge design, taking into consideration the characteristics of each region, can be established.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6788-6798
• /
• 2015

In recent high speed rail way, the operating speed of train is enhanced and the introduction of EMU train vehicles is increased. In addition, as expected the demand of the concrete slab track and the trend of design cross-section reduction, the clear behavior of evaluation of internal slab layer is demanded about the variation of design load and speed. The purpose of this study is to evaluate and identify the mechanical behavior pattern of concrete slab track and track-road bed with the variation of axle load and train speed. To this end, the behavior of TCL and HSB was evaluated in according to the variation of axle load and speed. And the analysis results and the data measured TCL strain sensor, which was embedded in TCL slab under installation on Honam high speed railway, was analyzed. The analysis result shows that the strain are increasing in according to the speed-up of train, and line regression was obtained from measured data. Analysis data of the state of bonding condition of slab layer and measured data was analyzed. It is conducted that the TCL layer stress of HEMU 430X, which of axle load, is lighter was similar to the stress of KTX-Honam, the standard deviation of measured stress is dramatically increased.

• Nuclear Engineering and Technology
• /
• v.4 no.4
• /
• pp.340-344
• /
• 1972

Isomeric ratios were measured for the capture of thermal neutron by $^{79}$ Br, $^{80}$ Se, $^{103}$ Rh, $^{115}$ In and $^{133}$ Cs as well as those of epi-cadmium neutron by $^{79}$ Br, $^{80}$ Se and $^{l33}$Cs. The measurements were performed by analysing decay curves obtained by ${\gamma}$-ray spectrometry after irradiation. The counting efficiency curve was determined by using the calibrated standard sources with overall uncertainties of about 1%. Isomeric ratios, given in $\sigma$ high spin/($\sigma$ high spin + $\sigma$ low spin), of $^{80, 80m}$Br, $^{81,81m}$Se, $^{014, 104m}$Rh, $^{116,116m}$In and $^{134, 134m}$Cs produced by thermal neutron activation were found to be 0.21$\pm$0.01, 0.14$\pm$0.02, 0.12$\pm$0.02, 0.69$\pm$0.07 and 0.058$\pm$0.004, respectively, Those values of $^{80, 80m}$Br, $^{81,81m}$Se, and $^{134, 134m}$Cs Produced by epi-cadmium neutron were found to be 0.19$\pm$0.02, 0.29$\pm$0.02 and 0.074$\pm$0.011, respectively. The experimental values obtained were compared with the theoretical values deduced from the statistical model. There were the general agreements between the theory and the experiment.t.

• Korean Journal of Acupuncture
• /
• v.35 no.3
• /
• pp.130-138
• /
• 2018

Objectives : The purpose of this study is to explore patients' perceptions that deserve attention when designing core questions for a clinical practice guideline of Korean medicine(KM) for degenerative lumbar spinal stenosis (LSS). Methods : Patients who had been admitted to Pusan National Korean Medicine Hospital from November 1, 2015 to October 31, 2016 were invited to the survey. Patients were eligible if they were both clinically and radiologically confirmed as degenerative LSS. The structured questionnaire was distributed by mail and outpatient visits. Questions included types of experienced Korean/Western medical interventions for LSS, their perceived effectiveness on symptoms, the necessity for studies of KM for degenerative LSS, the types of KM interventions to be investigated and the types of outcome measures after treatments. Data were descriptively analysed. Results : Twenty of thirty-one invited participants responded to the questionnaire. Acupuncture and herbal medicine were the most frequently used KM interventions. Eighteen respondents reported that KM treatments were helpful for their improvement. Sixteen patients who mentioned that research on KM is needed chose acupuncture as the top priority(88%) among KM interventions. The most important outcomes in the view of nineteen respondents included functional recovery (68%) and pain relief (53%). Thirteen respondents (65%) replied that both short-term and long-term outcome were important for them. Conclusions : Our findings may have limited validity due to the small number of respondents and the potential selection and information bias. Further qualitative studies and large-scale surveys to comprehensively identify patients' views are warranted.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.4
• /
• pp.125-135
• /
• 2015

The tendency of more longer span length being required economical in railway bridges is studying about PSC I shaped girder. In this case, it is important to analyze and choose the effective girder section for stiffness of bridge. This study investigates the dynamic properties and safety of PSC I shaped girder being used wide upper flange whose selection based on radii and efficiency factor of flexure for railway bridge in different span type. In addition, 40m PSC Box girder bridge adopted in Honam high speed railway is further analyzed to compare dynamic performance of PSC I shaped girder railway bridge with same span length. Time history response is acquired based on the mode superposition method. Static analysis is also analyzed using standard train load combined with the impact factor. Consequently, the result met limit values in every case including vertical displacement, acceleration and distort.

• Journal of the Korean Geophysical Society
• /
• v.3 no.2
• /
• pp.77-90
• /
• 2000

Five electrical resistivity dipole-dipole and two seismic reflection surveys were performed in the southeastern margin of the Yongdong basin to delineate the shallow basin architecture. To investigate the intra-basin structure, twenty four resistivity sounding points and three dipole-dipole lines were selected especially in the vicinity of volcanic masses. The basin-fault boundaries are identified in electrical dipole-dipole resistivity section as high resistivity-contrast of approximately $1,500\;{\Omega}{\cdot}m$, characterized as a band of high standard-deviation. They are also effectively clarified in the seismic reflection data: amplitude and continuity contrasts in the common shot gather, first-arrival profiles, complex attribute plots. The intra-basin resistivity structures are constructed by interpolating vertical electrical sounding data and dipole-dipole profiles. The high-resistivity anomalies most likely originate from the northsouth-trending and northeast-dipping volcanic masses, which are to be further quantitatively investigated with geomagnetic and magnetotelluric surveys.

• Journal of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.430-439
• /
• 2002

The development of reinforcing steel is required in reinforced concrete structures. The standard hooks that have been widely used for the tensile development in the beam-column joints tend to create difficulties of construction such as steel congestion as the member cross sections are becoming smaller due to the use of higher strength concrete and higher grade steel. Using the reinforcing bars with end mechanical anchoring device (headed reinforcement) provides potential economies in construction such as reduction in development lengths, simplified details, and improved responses to cyclic loadings. In this paper, the pullout strengths and behaviors of the headed reinforcement were experimentally studied. In 33 pullout tests performed using D25 deformed reinforcing bars, the test parameters were embedment depth, edge distance, head size, and the use of transverse reinforcement. The pullout strengths determined from tests closely agreed with the pullout strengths predicted using the CCD method. The pullout strengths increased with increasing embedment depths nd edge distances. The strengths tend to increase with the use of larger heads. From the experimental program where the effect of the transverse reinforcement was examined, a modification factor to the CCD was suggested to represent the effect of such reinforcement that is installed across the concrete failure plane on the pullout strengths.

• Journal of the Korean Geographical Society
• /
• v.48 no.6
• /
• pp.856-878
• /
• 2013

This paper examines the recent changes of urban center in metropolis in terms of land use. Jung-Gu, Daegu City is analyzed for a case study, and publicly notified individual land price data of 2000 and 2011 are used as analysis materials. The analyzing results show that a lot of residential land uses diminished in urban center, but residential function is still significant despite such decrease. Commercial land uses also decreased. Office land uses increased, but the increase is insignificant. On the contrary, unused or miscellaneously used land increased considerably. The phenomena implicate that land uses in the urban center are not positive under the influence of inner city decline. Overall, more land use changes occurred in the frame than in the core of urban center. That is, land uses in the core is more stable than them in the frame. However, decreasing commercial land uses in the core is noticeable, comparing to the frame. Mixed land uses for residence and commerce are most deconcentrated and office land uses most concentrated. Mean center point and standard deviation distance of land uses did not change significantly from 2000 to 2011, despite considerable change of land uses. The finding reveals that land use changes are widely occurring in urban center.

• Korea Journal of Hospital Management
• /
• v.20 no.2
• /
• pp.15-27
• /
• 2015

As patient satisfaction is a crucial component of improved health care outcomes, there is a need to evaluate the relationship between physicians' attitude and patients' satisfaction. The objective of this study is to examine the relationship between patients' satisfaction and physicians' friendly and caring attitudes by using recent physician ratings by patients. Data from a cross-sectional survey using a convenience sampling was utilized to examine the relationship between physicians' attitudes and patients' satisfaction. The independent variable was the physician's attitude, and the dependent variables were patients' satisfaction with the physician and the office setting. A total of 273,994 patients it the US were included. The patients' average (standard deviation, SD) satisfaction with the physician was 78.08 (0.14), and the average (SD) satisfaction with the office setting was 78.62 (0.12) out of 100. Physicians' attitude was a significant predicting factor impacting the patients' satisfaction with the physician and the office setting (p < 0.001). To facilitate patients' satisfaction with healthcare, a continuous effort to develop physicians' ability to communicate in an empathetic manner should be undertaken so that patients perceive their physicians as empathetic.