• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.215-215
• /
• 2015

Ag-Cu 공정 합금을 이용한 스테인리스 강의 brazing 거동에 미치는 산소의 영향을 조사하고 최적 brazing 조건을 도출하기 위하여 304L 스테인리스 강에 대한 다양한 산소농도의 Ag-Cu 공정 합금의 젖음성을 실험적으로 측정하였다. 0.02~0.07wt%의 범위에 해당하는 산소를 함유하였을 때 양호한 젖음 특성을 나타내었고, sandwich brazing 테스트를 통하여 유사한 조건에서 건전한 접합면을 얻을 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.10
• /
• pp.1451-1457
• /
• 2002

When an aqueous liquid such as water having high electric conductivity and high surface tension is discharged from a nozzle under a strong DC electric field, fine drops ranging from 30 to 450 microns can be obtained only through the spindle mode. In the present study, effects of the electric conductivity and the surface wettability of nozzle materials on formation of drops with this mode were investigated. For that, three nozzles with the same size but with different materials were prepared and tested; a stainless steel needle, and a plain and a metal (gold)-coated (except for the tip portion) silica needles. Uniform drops were obtained with the gold-coated silica nozzle over the wider range of the DC voltage input. That is, formation of the liquid cone and detachment of the liquid spindle (ligament) can be more stabilized and frequent with the needles having high electric conductivity but with low surface wettability at their tips.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.671-674
• /
• 2008

We investigate the slippage effect in a micro-channel depending on the surface characteristics; hydrophilic, hydrophobic, and super-hydrophobic wettabilities. The micro-scale grooves are fabricated on the vertical wall to make the super-hydrophobic surfaces, which enable us visualize the flow fields near walls and directly measure the slip length. Velocity profiles are measured using micro-particle image velocimetry (Micro-PIV) and compared those in the hydrophilic glass, hydrophobic PDMS, and super-hydrophobic PDMS micro-channels. To directly measure the velocity in the super-hydrophobic micro-channel, the transverse groove structures are fabricated on the vertical wall in the micro-channel. The velocity profile near the wall shows larger slip length and, if the groove structure is high and wide, the liquid meniscus forms curves into the valley so that the wavy flow is created after the grooves.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.105-112
• /
• 1995

방전에 의한 섬유의 표면개질 기술로서, 저온 플라즈마, Sputter Etching 처리에 대해 서술하고 표면개질 효과를 표면장력, ESCA, SEM을 근거로해서 고찰하였다. 더우기 접착성, 염색물의 색채에 미치는 효과에 대해 검토하였다. 섬유의 염색가공에 있어 젖음, 발수, 발유, 접착, 대전방지, 광택, 촉감 등의 표면에 관련하는 기능적 혹은 감각적 특성이 중요한 역할을 하고 있다. 섬유재료의 내부(bulk)의 특성을 살리면서 표면특성의 개질에 의해 한층 기능성을 향상시키는 것은 큰 의미를 가지며, 그와 관련한 표면개질 기술의 연구에 관심을 갖게 되었다. 종래에는 오로지 습식법에 의한 화학약품 처리나 그라프트 공중합 등이 많이 이용되어져 왔으나 습식가공법은 공업적으로는, 다량의 물, 유기용제, 색재, 수지, 계면활성제 등을 사용하기 때문에 피처리물의 건조에 필요한 에너지, 배수처리, 유기용제의 회수 등의 문제가 지적되고 있다. 이들 습식계의 문제점을 극복하는 기술로서 최근은 방전처리나 자외선 처리 등의 건식처리가 많이 연구되어 오고 있다.

• Journal of the Korean Ceramic Society
• /
• v.38 no.7
• /
• pp.608-614
• /
• 2001

수지결합질 탄소재의 사출성형시 중요한 요소는 열유변학적 거동이다. 수지결합질 탄소재의 열유변성, 기계적 물성은 충진제(흑연)의 표면상태에 영향을 받는다. Coupling 처리에 의한 충진제의 표면개질은 binder와의 젖음성과 호환성 등에 영향을 미쳐 수지결합질 탄소재의 특성을 향상시킨다. 본 연구에서는 충진제의 표면개질을 위해 실란 coupling 처리하였다. 충진제의 표면에 코팅된 실라놀은 FT-IR과 침수거동 관찰결과 충진제 표면에 단층으로 코팅되었음을 보였다. Coupling 처리는 충진제 표면에 활성을 가함으로써 수지결합질 탄소재의 열유변학적 거동과 기계적 물성에 기여하였다.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.52-57
• /
• 2010

The low viscous epoxy resin(bisphenol F) with carboxylic acid as the reductants was introduced for high performance and reliability in the ACA with a low melting point alloy filler system. The curing characteristics of the epoxy resin and temperature dependant viscosity characteristic of epoxy resin at the melting temperature of LMPA were investigated by dynamic mode of differential scanning calorimetry (DSC) and rheometer, respectively. Based on these thermo-rheological characteristics of epoxy resin and LMPA, the optimum process system was designed. In order to remove the oxide layer on the surface of LMPA particle, three different types of carboxyl acid-based reductant were added to the epoxy resin. The wetting angles were about $18^{\circ}$ for carboxypropyldisilioxane, and $20.3^{\circ}$ for the carboxy-2-methylethylsiloxane, respectively.

• Journal of the Korean Ceramic Society
• /
• v.37 no.12
• /
• pp.1172-1177
• /
• 2000

최근 콘크리트 보호 재료는 코팅을 이용하는 과거의 방법에서 함침을 이용하는 기법으로 전환하였다. 이중 발수제는 콘크리트의 표면의 특성을 변화시키는 것으로 친수성의 콘크리트를 소수성 물질을 결합시켜 물에 의한 젖음을 방어하는 것으로 콘크리트에 사용하였을 경우 콘크리트의 고유한 표면 장력을 작게 변화시키고 장력이 큰 물질 중의 하나인 물의 흡수를 방어하게 한다. 본 실험은 발수제의 성능 평가를 위하여 다공질의 재료인 콘크리트의 접촉각을 측정하여 그 변화를 관찰하였으며, 발수제들의 우수한 기능 중의 하나인 통기성을 시편의 중량 감소로 측정하였다. 발수제로 n-octyl ethoxy silane을 사용한 콘크리트 시편의 흡수 능력은 사용하지 않은 것의 약 10% 정도로 측정되었으며 시편의 수분 중량 감소는 7일 동안 90~130%로 관찰되어 통기성이 유지되어 콘크리트의 강도 유지에 효과적임을 알 수 있었다. 또한 겉보기 접촉각은 처리하지 않은 시편에서 24~33$^{\circ}$로 측정되었으나 처리된 시편의 최초면에서 130~141$^{\circ}$이었으며 2mm의 연마면에서는 127~132$^{\circ}$로 측정되어 콘크리트 표면 장력 변화가 유지되고 있음을 알 수 있었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.192-192
• /
• 2011

본 연구에서는 LED lead frame을 위한 Sn-3.5Ag 솔더의 젖음 특성과 반사율에 관하여 조사하였다. 금속기판과 액체금속간의 젖음성은 wetting balance tester를 이용하여 평가하였으며, 최대인출력, 최대인출시간 등을 측정하고 표면장력을 계산하였다. Sn-3.5Ag 솔더를 $250{\sim}290^{\circ}C$의 온도에서 젖음성을 측정하였는데 온도가 증가함에 따라 젖음성이 향상되는 것을 확인할 수 있었다. 또한 솔더가 도금된 Cu-coupon의 반사율을 측정하였는데 $270^{\circ}C$에서 가장 높은 반사율을 나타냈다.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.1
• /
• pp.45-51
• /
• 2001

The effects of wettability and surface oxidation on the low temperature and ultra-fine solder bump formation have been studied. Difference sequences of near eutectic In-Ag and eutectic Bi-Sn solders were evaporated on Au/Cu/Cr or Au/Ni/Ti Under Bump Metallurgy (UBM) pads. Solder bumps were formed using lift-off method and were reflowed in Rapid Thermal Annealing (RTA) system. The solder bumps in which In was in contact with UBM in In-Ag solder and the solder bumps in which Sn was in contact with UBM in Bi-Sn solder showed better bump formability during reflow than other solder bumps. The ability to form spherical solder bumps was affected mainly by the wettability of solders to UBM pads.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.12-20
• /
• 2009

Statement of problem: When an implant is fixed, a fixture comes into contact with a tissue fluid. Adhesion of a tissue fluid to a surface of implant is various case by case. Purpose: The ultimate goal of this work is to analyze a correlation between a surface roughness and wettability of implant specimens. A measurement for wettability is performed considering 4 types of specimen implant with surface treatments different from each other to investigate the change of wettability with the elapse of time. Material and methods: Firstly, 20 specimens of titanium were prepared. The specimen were made of a commercial Titanium Grade IV with the diameter of 10 mm and the thickness of 1 mm. According to the method of surface treatment, the specimens were classified into 4 groups of 5 specimens per group. Group A: Machined Surface Group B: Anodized surface Group C: RBM (HA blasting) surface Group D: CMP (calcium methaphosphate) coating surface. Surface roughness of specimen was measured using SV-3000S4 (Mituyoto, Japan). The measurement was based on the standard of JIS1994. Sessile drop method was used to measure the wettability, which measures contact angle between implant disc and saline with the time interval of 5, 10, and 15 seconds. SPSS 11.0 was used to analyze the collected data. In order to analyze the difference of wettability and surface roughness according to implant surface treatment method. The statistical significance was tested with the confidence level of 95%. Pearson's correlation coefficient was used to evaluate the correlation of surface roughness and wettability. Results: The difference of surface roughness was statistically significant in the order of Group C ($1.69{\pm}0.26$), Group D ($1.58{\pm}0.16$), Group B ($0.78{\pm}0.14$) Group A ($0.18{\pm}0.05$). The wettability has also a statistically significant difference, which was in the order of group B ($17.70{\pm}2.66$), Group C ($27.86{\pm}4.52$), Group D ($66.28{\pm}3.70$) Group A ($70.52{\pm}8.00$). There was no difference in wettability with the passage of time. Conclusions: 1. The surface roughness was high in the order of RBM, CMP, Anodized, Machined group (P<.05). 2. The wettability was high in the order of Anodized, RBM, CMP, Machined group (P<.05). 3. There was no statistical significance in the correlation of surface roughness and wettability.