• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.111.2-111.2
• /
• 2016

주사전자현미경은 시료표면에 전자빔을 주사하여 시료와 전자빔간의 상호작용으로 발생하는 이차전자(SE)와 후방산란전자(BSE)를 이용하여 시료표면을 관찰하는 장비이다. 일반적으로 텅스텐필라멘트를 사용하며, 10E-5 mbar이하 압력의 고진공에서 시료관찰이 이루어진다. 고진공 시료관찰시 도체 시료는 표면 코팅 없이 관찰이 가능하지만, 부도체 시료의 경우 전자빔에 의한 대전(Charging)현상이 발생하여 이미지가 왜곡되며, 이를 방지하기 위해 금, 백금 등의 금속을 표면에 코팅하여야 한다. 하지만 10E-1 mbar 이상 압력의 저진공에서는 부도체 시료도 전자빔에 의한 대전(Charging)현상이 발생하지 않아 생물시료 등의 부도체 시료를 표면코팅 없이 관찰할 수 있다. 본 발표에서는 현재 개발 중인 CeB6 필라멘트를 탑재한 저진공 주사전자현미경의 차동배기구조를 보여준다. 차동배기에 의해 가동 압력 10E-1 mbar이상의 저진공을 유지하는 시료실과 CeB6 필라멘트를 사용하기 위한 10E-6 mbar이하의 고진공을 유지하는 전자총실의 진공 배기특성을 보고한다.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.39-41
• /
• 2003

본 논문은 TPMS(Tire Pressure Monitoring System) 개발을 목적으로 압력센서를 무전원/무선 표면탄성파 센서를 이용하여 측정할 수 있는 방법을 연구한 것이다. Touch mode 방식의 압력센서의 경우 Touch down 되었을 때 정전용량은 큰 변화를 가지며 이후 압력의 증가에 대해 선형적으로 증가한다는 것을 이론적인 계산을 통해서 확인하였다. 또한 이와 같은 특성은 표면탄성파 센서의 응답 주파수의 변화를 통해 측정이 가능하다는 이론적인 모델링을 제시하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.6
• /
• pp.383-389
• /
• 2016

Based on a surface design with rectangular cavities and channels, we investigated the effects of gravity and capillary pressure on pool-boiling Critical Heat Flux (CHF). The microcavity structures could prevent liquid flow by the capillary pressure effect. In addition, the microchannel structures contributed to induce one-dimensional liquid flow on the boiling surface. The relationship between the CHF and capillary flow was clearly established. The driving potentials for the liquid supply into a boiling surface can be generated by the gravitational head and capillary pressure. Through an analysis of pool boiling and visualization data, we reveal that the liquid supplement to maintain the nucleate boiling condition on a boiling surface is closely related to the gravitational pressure head and capillary pressure effect.

• Journal of Biomedical Engineering Research
• /
• v.23 no.4
• /
• pp.309-315
• /
• 2002

Since the discovery, in the 1980s, of erosion-pit-induced fractures in implanted mechanical heart valves. cavitation on the surface of mechanical heart valves has been widely studied as a possible cause of pitting. Several factors, including peak dp/dt of the ventricular pressure. maximum closing velocity of the leaflet, and squeeze flow. have been studied as indices of the cavitation threshold. In the present study. cavitation erosion on the surface of a mechanical valve was examined by focusing on squeeze flow and the water hammer phenomenon during the closing period of the valve. In this study, we measures pressure wave forms near a valve and closing velocities of a disk, which were placed in a holder with and without compliance. In case of all holders, pressure drop of below vapor pressure expect at near the surface disk. It was also found that the closing velocity of the disk increased and that cavitation erosion was enhanced too. These results suggest that disk closing velocity during the closing phase has signifiant effects on pitting erosion.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.22 no.2
• /
• pp.33-37
• /
• 2016

One-way degassing valves usually designed for coffee packaging are recently applied to the various food packaging such as fermented health functional food or home meal replacement (HMR) packaging. The optimized degassing pressure by food product is important factor for keeping effective freshness and improving preservation of the food, therefore the development of degassing valves specified with various open pressure is needed. In this study, the mechanical characteristics of the degassing valve with ring type rubber disk were analyzed and a mathematical model was developed to predict the open pressure of the valve. The model was verified with test results derived from several available valves, and it may be useful in designing and developing a new valve.

• Water for future
• /
• v.16 no.3
• /
• pp.181-185
• /
• 1983

The problem of hydrodynamic pressure on dams during transient earthquake is treated by considering water as being incompressible. A time dependent Green's function is introduced which allows surface waves. The formula of the hydrodynamic pressure due to horizontal and vertical earthquake is derived which permits quantitative determination of the effect of surface waves. Finally, it is found that surface waves may be ignored when the depth of reservoir is large.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.127-127
• /
• 2011

수소가 아닌 헬륨을 희석 가스로 사용하여 나노결정질 실리콘박막을 증착하였고 압력과 RF power에 따른 특성을 살펴보았다. 특히, 4 Torr이상의 공정압력과 낮은 $SiH_4$ 유량을 사용하여 high pressure depletion(HPD)조건을 구현하였다. 그 결과, 6 Torr의 압력과 100W의 RF power를 사용하여 67%의 결정화도와 0.28nm/s의 증착속도를 얻었다.

• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.28-31
• /
• 1992

초고진공 시스템을 구성할 때 고려할 요소는 진공용기의 세척과 표면조도, 진공용 기의 재질, 기타 방출기체의 요인이다. 초고진공용기를 전해연마 처리하였으며, 처리한 진공 용기의 표면조도를 표면 조도기(surface profiler)로 측정하였다. 진공용기는 직경 300mm이 고 높이는 720mm로 하였다. 설치한 초냉각 펌프로 18시간 배기후 2.9 $\times$ 10-10Torr를 얻었 으며, 계속해서 초고진공용기를 250에서 60시간 baking 후 최저도달 압력이 3.08 $\times$ 10-11torr에 도달하였다 누드 이온게이지를 이용하여 초고진공용기의 최저도달압력과 누출비 를 측정하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.3
• /
• pp.10-18
• /
• 2001

In this paper, Supersonic jets impinging on a wedge were investigated in order to acquire fundamental design data for jet deflectors. Surface pressure distributions and pressure contours were obtained using a cold flow tester producing Mach 2 supersonic jets. Schlieren system was used to visualize the flow structure on the wedge surface. Numerical computations were performed and compared with the experimental results. Both results were in good agreement. The results showed that underexpansion ratio did not affect on the surface pressure distribution when the wedge is located at the nozzle exit. With increasing underexpansion ratio, pressure recovery decreased as the wedge is located farther from the nozzle exit. In the pressure contour, it was possible to locate the region where the peak pressure on the wedge surface was occurred.

• Journal of the Korean Institute of Gas
• /
• v.3 no.3 s.8
• /
• pp.23-28
• /
• 1999

Variation of explosion characteristics by the blocks in closed vessel was investigated to analyse the effect of the block volume(volume blockage) and the surface area of the blocks(ratio of block surface area to vessel volume). Volume and surface area of blocks in explosion vessel were changed by the combination of blocks. The volume of explosion vessels was 270 liter, and the LPG-air or NG-air mixtures were ignited by the electric spark. Explosion pressure was measured with the strain type pressure transducer. From the experimental results, explosion pressure was decreased by the increase of the volume blockage and the block surface area. And the decrease of explosion pressure was more affected by the volume blockage than the surface area.