• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.91-100
• /
• 2011

This study is to examine the PEG concentration, and drying humidity and drying periods of humidity-controlled drying(HCD) for conservation of waterlogged woods(Pinus densiflora S. et Z.), and dimension stability of HCD were compared with those of air-drying and vacuum freeze-drying(VFD). Dimension stability of vacuum freeze-drying was the most excellent, i.e., PEG crystal was uniformly distributed in woods. Increasing concentrations of PEG, dimension stability of HCD was increased and drying periods decreased. Dimension stability of HCD after the treatment with the high concentration(70%) of PEG soaking was similar to those of VFD after the treatment with the low concentration(40%) of PEG soaking. In conclusion, high concentration(about 70% in water) PEG solution was the most suitable as a pre-treatment for HCD of waterlogged woods. However, drying should be maintained with enough high humidity and longer period.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.269-276
• /
• 2007

$TiO_2$-containing pitch fibers were prepared and various stabilization variables were investigated by characterizations of the fibers and behaviors of $TiO_2$ particles in the optimum stabilization conditions. When pitch fiber was stabilized by air at the optimum condition, the fiber weight increased as an increase of the stabilization temperature and a decrease of $TiO_2$ concentration. The carbonization yield was 71~82 wt.%, showing a decrease of the yield with the $TiO_2$ increase caused by the catalytic activity of $TiO_2$ to combustion. During the stabilization, newly developed carbonyl and carboxyl groups were introduced on the fiber surface and cross-linking reactions were progressed resulting the thermosetting property, which was verified by the replacement of hydrogen with oxygen. Pore size of the activated carbon fiber was increased by an increase in $TiO_2$ concentration. In the considerations of the aggregation behaviors of the $TiO_2$ particles, the optimum stabilization conditions of 0.5 wt.% $TiO_2$ containing petroleum-based pitch fiber were suggested as $280^{\circ}C$, 3 hr.

• Clean Technology
• /
• v.19 no.4
• /
• pp.469-475
• /
• 2013

In this research, the stabilization characteristics of upgraded coal using palm oil residues were investigated. The Eco coal, which is the Indonesian low-rank coal, was used as a raw material. The low-rank coal was mixed with palm fatty acid distillate (PFAD), and then dried in a nitrogen atmosphere at $107^{\circ}C$. The trend of spontaneous combustion of upgraded coal was studied by measuring of crossing-point temperature (CPT), low temperature oxidation and moisture readsorption. The results of the CPT measuring and low temperature oxidation showed that the propensity of spontaneous combustion of the upgraded coal was improved compared to the dried coal. The moisture readsorption characteristics of the upgraded coal was also improved. The upgraded coal was stabilized through the surface coating with PFAD, and stability of upgraded coal was proportional to the content of PFAD.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.175.2-175.2
• /
• 2015

이 연구는 nano-indenter를 중심으로 박막의 nano-electrotribology 분석 연구로 Hafnium Nitride (HfN) 박막의 열처리 시 열적안정성에 대한 연구를 진행하였다. HfN 박막은 Copper (Cu)와 Silicon (Si)의 계면 확산방지막으로 사용될 수 있는 박막으로 현재 많은 연구소에서 다양한 연구가 진행되고 있다. HfN 박막은 Si (100)기판 위에 rf magnetron sputter로 증착되었다. 증착 시 Ar, $N_2$ 가스유량을 총 40 sccm 사용하였고 증착 후 HfN 박막을 질소분위기 furnace에서 500, $700^{\circ}C$로 각각 30분 동안 열처리 하였다. 열처리 전 후의 시료를 nano-indenter를 이용하여 nano-electrotribology 분석을 실시하였다. Nano-indenter 측정결과 열처리 전 HfN 박막 시료의 표면강도는 39.68 GPa였고 500oC 열처리 후 31.31 GPa로 감소하였다. 그러나 $700^{\circ}C$ 열처리 시 표면강도가 37.89 GPa로 다시 증가하였다. 탄성계수 측정결과도 이와 같은 경향을 나타내었는데, $500^{\circ}C$ 열처리 전 후 탄성계수가 258.99 GPa에서 201.88 GPa로 감소하였고 $700^{\circ}C$ 열처리 시 247.55 GPa로 다시 증가하였다. 이는 $500^{\circ}C$ 열처리하였을 때 박막 내에 흡착되었던 $N_2$ 가스가 빠져나가며 tensile stress가 발생하여 박막의 표면강도 감소를 유발했고 $700^{\circ}C$ 열처리 시 다시 박막 표면이 안정화되었기 때문으로 생각된다. 이를 통해 열처리 온도 변화에 의한 질소효과가 나타나 HfN 박막 표면의 물성이 달라지는 것을 확인하였다.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.577-581
• /
• 2011

Silicon nanoparticles have attracted a great deal of scientific interests due to its intense photoluminescence in the visible spectral region and its potential applications in biological fluorescence maker, RGB (red, green, blue) display, photonics and photovoltaics etc. Practical applications making use of optical and physicochemical properties of Si nanoparticles requires an efficient synthetic method which allows easy modulation of their size, size distribution as well as surface functionalities etc. In this study, a one-pot solution reduction scheme is attempted to prepare alkyl-terminated Si nanoparticles (<10 nm) with Si precursors, (Octyl)$SiCl_3$ or mixture of (Octyl)$SiCl_3$ and $SiCl_4$, containing alkyl-groups using Na(naphthalide) as reducing agent. The surface capping of Si nanoparticles with octyl-groups as well as Si nanoparticle formation was achieved in one-pot reaction. The hexane soluble Si nanoparticles with octyl-termination were in the range of 2-10 nm by TEM and some oxide groups (Si-O-Si) was present on the surface by EDS/FTIR analyses. The optical properties of Si nanoparticles measured by UV-vis and PL evidenced that photoluminescent Si nanoparticles with alkyl-termination was successfully synthesized by solution reduction of alkyl-containing Si precursors in one-pot reaction.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.5
• /
• pp.423-429
• /
• 2014

Passive attitude stabilization methods using the permanent magnet combined with hysteresis damper and the gravity gradient boom have been widely used for the attitude determination and control of cube satellite, due to its advantage of system simplicity. In this paper, on-orbit thermal characteristics of the cube satellite considering the attitude profiles obtained from the above passive attitude stabilization methods have been investigated through on-orbit thermal analysis. In addition, the effectiveness of the various thermal coatings on the panel for the communication antenna installation has been verified.

• Korean Journal of Materials Research
• /
• v.7 no.10
• /
• pp.838-844
• /
• 1997

폴리아크릴로나트릴(PAN)계 탄소섬유 및 안정화 PAN섬유를 사용하여 제조한 페놀수지 복합재료의 열주기 산화저항성에 섬유표면의 인산코팅 유.무가 미치는 영향을 조사하였다. 각 복합재료의 열주기 산화저항성은 열중량분석기의 원리를 응용하여, 공기중에서 hot zone과 cold zone을 주기적으로 반복이동하는 열충격조건에 노출되면서 초래되는 복합재료의 중량변화를 측정하여 비교하였다. 시험변수로는 hot zone에 노출된 온도, 시간 및 싸이클횟수를 선정하였다. 이 시험방법은 비교적 단순하며, 작은 크기의 시편으로도 가능하고, 중량변화가 온-라인 모니터에서 직접 감지되므로 데이타의 신뢰성이 \ulcorner다. 각 시험조건에서 인산코팅한 섬유를 사용한 복합재료가 그렇지 않은 재료보다 고온에서의 높은 산화저항성 때문에 우수한 열주기저항성을 보여 주었다. 또한 인산코팅의 존재 여부가 열주기시험 후의 탄소섬유-페놀수지 및 안정화 PAN섬유-페놀수지 복합재료의 미세구조에 미치는 영향을 조사하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.307-310
• /
• 2004

전기영동전착법을 이용한 초전도 후막선재의 제작은 제작 장치와 공정이 간단하고 두께제어 및 다양한 형태의 초전도 막과 선재 제작이 가능한 경제적 효율성과 기술적 장점을 가지고 있다. 따라서 초전도 후막의 특성향상을 위하여 전착공정 과정에서 입자의 치밀성 및 배향성 향상을 위한 칙적화 방안과, 건조 및 열처리 과정에서 발생되는 크랙 및 기공현상과 같은 문제점을 극복 할 수 있는 균일한 후막 표면 화보에 관한 비교 분석 연구를 수행하였다. 전기영동전착법에 의한 초전도후막 제작을 위한 조건 중 현탁용매 조건에 대한 최적화를 구현함으로써 전착 불균일성에 따른 초전도 특성 저하요인인 후막표면의 기공과 크랙현상을 최소화하였다. 전기영동 전착법에 의한 초전도 후막의 특성을 향상시키기 위한 제작 방법으로 각 용매별에 따른 안정화된 제작 조건을 구현하였다.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.11a
• /
• pp.377-383
• /
• 2012

순수한 우라늄 금속은 칩이나 분말로 존재할 경우 반응면적이 넓어 자연 발화할 정도의 산화력을 지니며 산화열이 높기 때문에 운반 및 처리시 화재의 위험성이 있다. 따라서 이들을 장기보관하거나 영구처분시 안정한 형태의 전환이 우선되어야 한다. 외국의 경우 감손우라늄 폐기물을 자연에서 가장 안전한 상태인 산화우라늄의 형태로 산화 처리 후 영구처분하고 있으며, 이를 위하여 우라늄 칩의 산화거동에 관한 연구가 수행 되었다. 우라늄 칩을 안전하게 보관하려면 불활성 분위기를 형성해 주든가 또는 우라늄 칩의 표면에 부동태층을 형성시켜야 한다. 또는 우라늄 칩을 광유속에 넣어 공기나 물이 우라늄 칩에 접촉되지 않는 방법으로 보관하는 것이 바람직하다.

• Journal of Environmental Impact Assessment
• /
• v.30 no.4
• /
• pp.247-257
• /
• 2021

In this work, Iron Nano-Particles Impregnated BioChar/bead (INPBC/bead) soil amendment was developed to increase biochar's reactivity to As in soil and preventing possible wind loss. Prior to preparation of INPBC/bead, INPBC was produced utilizing lignocellulosic biomass and Fe(III) solution in a hydrothermal method, followed by a calcination process. Then, the bead type amendment, INPBC/bead was produced by cross-linking reaction of alginate with INPBC. FT-IR, XRD, BET, and SEM-EDS analyses were utilized to characterize the as-synthesised materials. The particle size range of INPBC/bead was 1-4 mm, and different oxygen-containing functional groups and Fe3O4 crystalline phase were produced on the surface of INPBC/bead, according to the characterization results. The soil cultivation test was carried out in order to assess the stabilization performance of INPBC/bead utilizing As and Pb-contaminated soil obtained from an abandoned mining location in South Korea. After 4 weeks of culture, TCLP and SPLP extraction tests were performed to assess the stabilization efficacy of the amendment. The TCLP and SPLP findings revealed that raising the application ratio improved stabilizing efficiency. The As stabilization efficiency was determined to be 81.56 % based on SPLP test findings for a 5% in (w/w) INPBC/bead treatment, and the content of Pb in extracts was reduced to the limit of detection. According to the findings of this study, INPBC/bead that can maintain pH of origin soil and minimize wind loss might be a potential amendment for soil polluted with As and heavy metals.