• Title/Summary/Keyword: 표면 방출율

Search Result 94, Processing Time 0.029 seconds

The Applicable Investigation of Response Surface Methodology(RSM) for the Prediction of the Ignition Time, the Heat Release Rate and the Maximum Flame Height of the Interior Materials (내장재의 발화시간, 열방출율 및 최대화염 높이의 예측을 위한 반응표면방법론의 활용성 고찰)

  • Ha, Dong-Myeong
    • Fire Science and Engineering
    • /
    • v.20 no.2 s.62
    • /
    • pp.14-20
    • /
    • 2006
  • The aim of this study is to predict the ignition times and the HRR(heat release rate) for building interior materials. By using the literature data and RSM(response surface methodology), the new equations for predicting the ignition time and the HRR of building interior materials are proposed. The A.A.P.E.(average absolute percent error) and the A.A.D.(average absolute deviation) of the reported and the calculated ignition times by means of the thickness and the density were 4.35 sec and 1.57 sec, and the correlation coefficient was 0.987. The correlation coefficient of the reported and the calculated the net HRR by means of burner width and power was 0.983. Also the correlation coefficient of the reported and the calculated the total HHR by means of burner width and power was 0.999. The correlation coefficient of the reported and the calculated the maximum flame height by means of burner width and power was 0.999. The values calculated by the proposed equations were in good agreement with the literature data.

Distribution of Hydrometeors and Surface Emissivity Derived from Microwave Satellite Observations and Model Reanalyses (위성관측(MSU)과 모델 재분석 자료에서 조사된 대기물현상과 표면 방출율의 분포)

  • Kim, Tae-Yean;Yoo, Jung-Moon
    • Journal of the Korean earth science society
    • /
    • v.23 no.7
    • /
    • pp.552-564
    • /
    • 2002
  • The data of satellite-observed Microwave Sounding Unit (MSU) channel 1 (Ch1) brightness temperature and General Circulation Model (GCM) reanalyses over the globe have been used to investigate low tropospheric hydrometeors and microwave surface emissivity during the period from January 1981 to December 1993. The average of GCM Ch1 temperature has been reconstructed from three kinds of reanalyses, based on the MSU weighting function. Since the GCM temperature mainly corresponds to the thermal state of the lower troposphere without the difference in the emissivity between ocean and land, it is higher in summer than in other seasons over the regions. The MSU temperature over the ocean shows its maximum at the ITCZ and the SPCZ due to hydrometeors. Over high latitude ocean, the temperature is enhanced because of sea ice emissivity, while it is reduced over the land. The seasonal displacement of the ITCZ and the SPCZ systematically appeared in the difference of Ch1 temperature between the GCM and the MSU. The difference values decrease in the regions of the ITCZ, the SPCZ, and the sea ice because of the increase of the MSU temperature. According to the local minima of the values, the ITCZ moves norhward to 9 N in fall, and the SPCZ moves southward to 12 S in boreal fall and winter. The sea ice in the northern hemisphere is extended southward to 53 N in winter, while the ice in the southern hemisphere, northward to 58 S in boreal summer. We also have discussed the separated contribution from hydrometeors and surface emissivity to the MSU Ch1 temperature, utilizing radiative transfer theory. The increase of 4-6K in the temperature over the ITCZ is inferred to result from hydrometeors of 1-1.5mm/day, and furthermore the increase of 10-30K over the high latitude ocean, ice emissivity of 0.6-0.9.

Optical Gain of AIGaN/GaN DH at Room-Temperature (실온에서 AIGaN/GaN DH의 광학이득)

  • ;;H. Amano;I. Akasaki
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 1994.11a
    • /
    • pp.97-97
    • /
    • 1994
  • Wide gap 반도체 중 하나인 GaN 에너지갭이 실온에서 3.4eV 이고 직접천이형 에너지대 구조를 가지므로 청색 및 자외영역의 파장을 발광하는 발광다이오드와 바도체 레이저 다이오드의 제작에유용한 재료이다. GaN계 III족 질화물반도체가 다파장용 광원으로서 유망함을 보인 것은 1970년대 초방의기초적 연구이다. 이로부터 약 25년이 경고한 현재 청색발광다이오드가 실용화당계에 이르게 되었지만 아직까지 전류주입에 의한 레이저발진은 보고되고있지 않다. 이 논문에서는 ALGaN/GaN이중이종접합(DH) 구조의 광여기에 의한 유도방출과 광학적 이득을 측정하므로서 전류주입에의한 레이저발진의 가능성을 조사하였다. 유기금속기상에피텍셜(MOVPE)법으로 성장한 ALGaN/GaN DH구조의 표면에 수직으로 펄스발진 질소레이저(파장:337.1nm, 주기:10Hz, 폭: 8nsec) 빔의 공출력밀도를 변화시키어 조사하고 시료의단면 혹은 표면으로부터 방출되는 광 스펙트럼을 측정하였다. 입상광밀도가 증가함에 따라 자연방출에 의한 발광피크보다 낮은 에너지에서 발광강도가 큰 유도방출에 의한 피크가 370nm의 파장에서 현저하게 나타났으며 실온에서 유동방출에 필요한 입사공밀도의 임계치는 약 89㎾/$\textrm{cm}^2$이었다. 이는 GaN 단독층에 대한 유동방출의 임계치 700㎾/$\textrm{cm}^2$ 에 비하여 약 1/8정도 낮은 것이며, 이를 전류밀도로 환산하면 약 27㎄/$\textrm{cm}^2$ 정도로서 전류주입에 의하여서도 레이저발진을 실현할 수 있는 현실적인 값이다. 한편 광여기 방법으로 측정한 광학적 이득은 입사광의 밀도가 각각 100㎾/$\textrm{cm}^2$과 200㎾/$\textrm{cm}^2$일 때 34$cm^{-1}$ / 과 160 $cm^{-1}$ / 이었다. 이와 같은 결과는 GaN의밴드단 부근의 파장영역에서 AIGaN 흔정의 굴절율이 GaN의 굴절율보다 작으므로 DH구조의 채택의 의한 광의 몰입이 가능하여 임계치가 저하된 것으로 여겨진다. 또한 광학적 이득의 존재는 이 구조에 의한 극단파장 반도체 레이저다이오드의 실현 가능성을 나타내는 것이다.

  • PDF

A Study on the Characteristics of FDS Heat Release Rate Predictions for Fire involving Solid Combustible Materials in a Closed Compartment (밀폐된 구획 내 복합소재 고체 가연물의 연소시 열방출률의 FDS 예측 특성)

  • Hong, Ter-Ki;Roh, Beom-Seok;Park, Seul-Hyun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.11
    • /
    • pp.349-356
    • /
    • 2020
  • The heat release rate (HRR) and fire growth rate of fire for the solid combustibles consisting of multi-materials was measured through the ISO 9705 room corner test, and the computational analysis in a closed compartment was performed to simulate a fire using the heat release rate prediction model provided by a Fire Dynamics Simulator (FDS). The method of predicting the heat release rate provided by the FDS was divided into a simple model and a pyrolysis model. Each model was applied and computational analysis was performed under the same conditions. As the solid combustible consisting of multi-materials, a cinema chair composed mostly of PU foam, PP, and steel was selected. The simple model was over-predicted compared to the predicted heat release rate and fire growth rate using the pyrolysis model in a closed compartment.

Electrical Properties of MgO Films as a Protective Layer for AC PDPs (AC PDP 보호막 doped MgO 박막의 전기적 특성)

  • Kim, Chang-Il;Jung, Young-Hun;Lee, Young-Jin;Paik, Jong-Hoo;Choi, Eun-Ha;Jung, Seok;Kim, Jeong-Seok
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2009.06a
    • /
    • pp.155-155
    • /
    • 2009
  • AC-PDP의 유전체 보호막 물질로 사용 종인 다결정 MgO의 전기적 특성을 개선하기 위하여 본 연구에서는 MgO에 doping 물질과 첨가량에 따른 전기적 특성을 고찰하였다. 박막을 증착시키기 위해 MgO pellet target을 만드는데 이때 pellet의 밀도, XRD, 비커스경도, 파괴인성, 표면 grain size와 이차전자방출계수와의 관계 및 박막의 표면거칠기, 표면의 형태, 투과율과 이차전자방출계수와의 관계를 고찰하였다. 이에 여러 dopant를 첨가하여 특성 평가한 실험데이터를 정리하여 이차전자방출계수와의 연계성을 조사 하였다.

  • PDF

생체모방 복합 눈 구조를 이용한 갈륨비소 반사방지막 제작

  • Lee, Su-Hyeon;Im, Jeong-U;Go, Yeong-Hwan;Jeong, Gwan-Su;Yu, Jae-Su
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.08a
    • /
    • pp.412-412
    • /
    • 2012
  • 갈륨비소(GaAs)는 수직공진표면방출레이저, 발광다이오드, 태양전지 등과 같은 광전소자에 널리 사용되는 물질이다. 그러나 높은 굴절률을 갖는 갈륨비소는 표면에서 30% 이상의 반사율을 갖기 때문에 광손실로 인해 소자의 성능이 저하된다. 따라서 표면 Fresnel 반사율을 낮출 수 있는 효율적인 반사방지막이 필요하다. 최근, 열적 불일치, 물질 선택, 접착력 저하의 단점을 가지고 있는 기존 다중박막을 대체하는 생체모방 서브파장 나노구조가 활발히 연구되고 있다. 이러한 구조는 공기(air)부터 갈륨비소까지 선형적인 유효굴절률 분포를 갖는 유효 단일박막과도 같기 때문에 소자 표면에서의 광손실을 줄일 수 있다. 더욱이, 자연계의 나방의 각막과 나비의 눈의 구조 형태를 모방한 반도체 생체모방 복합 눈(compound eye)은, 즉 마이크로 렌즈모양과 서브파장 나노격자구조의 복합적 형태, 표면에서 우수한 반사방지 특성을 나타낸다. 본 연구에서는, 포토리소그래피와 유도결합플라즈마 식각법을 이용하여 GaAs 기판 표면에 마이크로 렌즈 모양의 패턴을 형성한 후, 스핀코팅을 이용하여 나노 크기를 갖는 실리카 구를 도포하여 건식 식각함으로써 복합 눈 구조를 갖는 갈륨비소 반사방지막을 제작하였다. 제작된 샘플의 표면 및 식각 형상은 전자현미경(scanning electron microscope)을 사용하여 관찰하였으며, UV-vis-NIR spectrophotometer를 사용하여 반사율을 측정하였다.

  • PDF

Electronic and Optical Properties of MgO Films Due to Ion Sputtering

  • Lee, Sang-Su;;Lee, Gang-Il;Lee, Seon-Yeong;Chae, Hong-Cheol;Gang, Hui-Jae
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.08a
    • /
    • pp.188-188
    • /
    • 2011
  • MgO는 암염구조의 이온결합성 화합물로 7.8 eV의 높은 띠 틈과 약 95%의 탁월한 투과도를 갖는다. 또한, ${\gamma}$ process에 의한 이차 전자 방출이 높고 이온 스퍼터링에 의한 표면 손상이 적어 면 방전 AC-PDP의 보호막으로 이용된다. 따라서 MgO 보호막에 관한 연구는 이차 전자 방출 계수를 높여 방전 전압을 감소시키고 높은 유전율과 투과도를 유지시키기 위한 목적으로 전개되어지고 있다. 본 연구는 이온 스퍼터링에 의한 MgO 보호막의 표면 특성의 변화를 알아보기 위해 이루어졌다. MgO 박막은 electron beam evaporation의 방법을 통해 챔버 내에 O 기체를 주입하고 P type Si 기판을 300$^{\circ}C$ 가열하여 40 nm 두께로 제작되었다. 박막 시료는 표면분석 전 초고진공챔버 내에서 표면에 산화된 불순물 제거를 위해 550$^{\circ}C$의 열처리가 되어졌다. 그리고 250 eV의 He 이온으로 박막 표면을 스퍼터링 하여 XPS, REELS, UPS를 이용하여 전자 및 광학적 특성을 연구하였다. XPS 분석을 통해 MgO 박막은 He 이온 스퍼터링에 의해 표면의 화학적 조성이 변하지 않는다는 것을 확인했다. MgO 박막에 이온 스퍼터링을 하면 표준 시료와 비교하여 Ep=1,500 eV일 때 7.54 eV에서 7.63 eV로 높아지는 경향이 있다. 일함수는 He 이온 스퍼터링 한 결과 3.85 eV로부터 4.09 eV로 약간 높아졌다. 또한, QUEELS simulation으로 얻은 가시광 투과도는 91~92%로 분석되었다.

  • PDF

Fabrication of New Ti-silicide Field Emitter Array with Long Term Durability (Ti-실리사이드를 이용한 새로운 고내구성 전계방출소자의 제작)

  • Jang, Ji-Geun;Baek, Dong-Gi;Yun, Jin-Mo;Yun, Jin-Mo;Im, Seong-Gyu;Jang, Ho-Jeong
    • Korean Journal of Materials Research
    • /
    • v.8 no.1
    • /
    • pp.10-12
    • /
    • 1998
  • Si FEA 로부터 tip의 표면을 Ti금속으로 silicidation한 새로운 2극형 Ti-실리사이드 FEA를 제작하고 이의 전계방출 특성을 Si FEA의 경우와 비교하였다. 양극과 음극간의 거리를 10$\mu\textrm{m}$로 유지하고 $10^{-8}$Torr의 고진공 상태에서 측정한 실리사이드 FEA의 turn-on전압은 약 40V로, 전계방출전류와 정상상태 전류 변동율은 150V의 바이어스 아래에서 약 3x$10^{-2}$ $\mu$A/tip와 0.1%min로 나타났다. Ti-실리사이드 FEA는 Si FEA에 비해 낮은 turn-on 전압, 높은 전계방출전류 및 고내구특성을 나타내었다.

  • PDF