• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.50-56
• /
• 2004

Finishing is the final process in molds manufacturing and consumes much process time. Also, it influences on surface quality of molds. But, there are few systematic methods to control the process. In this work, basic experiments were carried out to study the machining characteristics of the finishing tools. From the experiments, critical surface roughness and wear coefficient are suggested to reduce the number of finishing steps and to plan a systematic finishing procedure. Comparison experiments were carried out between the expert's method and the new method, which is based on the results of this research. From the experiments, it is verified that the systematic method takes less time and generates less form error in the machined surface than the worker's method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.1
• /
• pp.70-75
• /
• 1991

Contact angle measuring device was developed in this laboratory using laser beam projec-tion. The new method allows for rapid and direct determination of stationary, advancing, and receding contact angles on both planar and nonplanar solid surfaces, including fibers with very small diameters. A narrow laser beam impinges on an edge of an interface of liquid and solid. This makes two projected laser beam lines upon and radiating from the center of a protractor scale on a tangent screen. Contact angle is measured by determining the difference in angle on the protractor scale between the two projected laser beam lines. Contact angles measured on Perspex-CQ using this instrument were in agreement with the literature. it was shown that this instrument provides a novel method for the facile and accurate measurement of contact angles.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.129-129
• /
• 2006

인쇄회로를 제작하기 위하여 기판상에 에칭 레지스트, 도금막, 절연재료, 솔더 마스크 등을 패터닝 하게 되는데, 일반적으로 이러한 유기체 막들은 대부분 액상이나 고형의 필름 형태로 패턴을 형성하게 된다. 형성된 패턴과 동박과의 접착력 향상이 가장 주요한 문제점 중의 하나이다. 상대적으로 편평한 동박면과 유기체 막과의 접착력을 향상시키기 위해 일반적으로 접촉 면적을 증가시키기 위한 표면개질을 하게 된다. 기계적 브러싱이나 스크러빙에 의해서도 기판상의 동박의 surface topography 를 개선하기 위한 노력이 시도 되고 있지만, 본 연구에서는 microetching 방법에 의해서 화학적으로 동박 표면상에 최대한 요철을 많이 형성하여 에칭 레지스트와 동박 간의 접착력을 증대시키기 위한 연구를 수행하였다.

• Journal of Chest Surgery
• /
• v.38 no.1 s.246
• /
• pp.76-79
• /
• 2005

The coexistence of mesenchymal tumor and carcinoma in the esophagus is extremely rare. We report a case of squamous cell carcinoma located at the mucosal surface over leiomyoma of the esophagus. A 76-year-old man with complaints of 3 months onset of odynophagia was diagnosed preoperatively as squamous cell carcinoma over submucosal tumor with calcification. Esophagectomy and esophagogastrostomy were performed through the right thoracotomy and upper median laparotomy. The patient is doing well without evidence of recurrence in the 25 months after resection. We discuss the pathogenesis and possible relations between the two tumors.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.3
• /
• pp.18-24
• /
• 2011

In this paper, we present the load-deflection behavior of GRP pipes. GRP buried pipes are widely used in construction in the advantage of their superior mechanical and physical characteristics such as high chemical resistance, high corrosion resistance, right weight, smooth surface of the pipe, and cost effectiveness from soil-structure interaction. To design flexible pipes to be buried underground, it should be based on the ASTM D2412(2010). When applying ASTM D 2412(2010) to the design, pipe stiffness(PS) must be predetermined by the parallel-plate test which requires tedious and laborious working process. To overcome such problems, the finite element simulations for finding the load-deflection behavior of the GRP flexible pipes is installed at UTM testing machine. In the finite element simulations, basic data, such as the modulus of elasticity of the material and cross-sectional dimension, is used. From the investigation, we found that the difference between experimental result and analytical prediction is less than 15% when the pipe deflected 3% and 5% of its vertical diameter although the pipe material is not uniform across the cross-section.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.7
• /
• pp.891-899
• /
• 1997

This paper presents the results of a detailed experimental examination of fully developed asymmetric flows between annular tubes with square-ribbed surface roughness. The main emphasis of the research has been on establishing the turbulence structure, particularly in the central region of the channel where the two dissimilar wall flows interact. Measurements have included profiles of time mean velocities, turbulence intensities, turbulent shear stresses, triple velocity correlations, skewness, and flatness. The region of greatest interaction is characterized by strong diffusional transport of turbulent shear stress and kinetic energy from rough toward the smooth wall region, giving rise to an appreciable separation between the planes of zero shear stresses depending on positions of roughness on the walls.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.194.1-194.1
• /
• 2014

기저면에 구조적 결함을 도입함으로써 그래핀과 $MoS_2$와 같은 이차원 결정의 물리, 화학, 전기 및 기계적 성질을 제어하려는 연구가 폭넓게 수행되고 있다. 본 연구에서는 플라즈마 속의 산소 래디컬을 이용하여 기계적 박리법으로 만들어진 단일층 그래핀과 $MoS_2$ 표면에 구조적 결함을 유도하고 제어하는 방법을 개발하였다. 라만 및 광발광 분광법을 통해 생성된 결함 밀도를 측정하고 전하 밀도 등의 화학적 변화를 추적하였다. 그래핀의 경우 산소 플라즈마 처리 시간에 따라 결함(defect)의 정도를 보여주는 라만 D-봉우리의 높이와 넓이가 커짐을 확인하였고 이를 G-봉우리의 높이와 비교하여 정량하였다. $MoS_2$의 경우 $E{^1}_{2g}$와 $A_{1g}$-봉우리의 높이가 점점 감소하고 광발광의 세기 또한 감소함을 확인하였다. 또한 본 연구에서는 기판의 편평도가 결함 생성 속도에 미치는 영향을 비교 및 분석하여 반응 메커니즘을 제시하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.194.2-194.2
• /
• 2014

기저면에 구조적 결함을 도입함으로써 그래핀과 $MoS_2$와 같은 이차원 결정의 물리, 화학, 전기 및 기계적 성질을 제어하려는 연구가 폭넓게 수행되고 있다. 본 연구에서는 플라즈마 속의 산소 래디컬을 이용하여 기계적 박리법으로 만들어진 단일층 그래핀과 $MoS_2$ 표면에 구조적 결함을 유도하고 제어하는 방법을 개발하였다. 라만 및 광발광 분광법을 통해 생성된 결함 밀도를 측정하고 전하 밀도 등의 화학적 변화를 추적하였다. 그래핀의 경우 산소 플라즈마 처리 시간에 따라 결함(defect)의 정도를 보여주는 라만 D-봉우리의 높이와 넓이가 커짐을 확인하였고 이를 G-봉우리의 높이와 비교하여 정량하였다. $MoS_2$의 경우 $E{^1}_{2g}$와 $A_{1g}$-봉우리의 높이가 점점 감소하고 광발광의 세기 또한 감소함을 확인하였다. 또한 본 연구에서는 기판의 편평도가 결함 생성 속도에 미치는 영향을 비교 및 분석하여 반응 메커니즘을 제시하고자 한다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.1
• /
• pp.24-31
• /
• 2016

Purpose: Many studies have shown that airborne-particle abrasion of fiber post can improve the bonding strength to resin cement. But, airborne-particle abrasion may influence the property of fiber post. The purpose of this study is to evaluate the influence of airborne-particle abrasion on flexural strength of fiber post. Materials and Methods: Two fiber-reinforced posts; DT Light Post Size 2 (1.8 mm diameter, Bisco Inc) and RelyX Fiber Post Size 3 (1.9 mm diameter, 3M ESPE); were used in this study. Each group was divided into 3 subgroups according to different surface treatments; without pretreatment: $50{\mu}m$ aluminum oxide (Cobra$^{(R)}$, Renfert): and $30{\mu}m$ aluminum oxide modified with silica (Rocatec Soft$^{(R)}$, 3M ESPE). After airborne-particle abrasion procedure, three-point bending test was done to determine the flexural strength and flexural modulus. The diameter of each posts was measured to an accuracy of 0.01 mm using a digital micrometer. There was no diameter change before and after airborneparticle abrasion. The mean flexural moduli and flexural strengths calculated using the appropriate equations. The results were statistically analyzed using One-way ANOVA and Scheffe's post-hoc test at 95% confidencial level. Results: There was no significant difference on flexural strength between groups. Conclusion: In the limitation of this study, flexural strength and flexural modulus of fiber post are not affected by airborne-particle abrasion.

• Journal of the Korean Chemical Society
• /
• v.47 no.5
• /
• pp.439-446
• /
• 2003

Surface-enhanced Raman(SER) spectroscopy was utilized to investigate the adorption orientation of the 4-biphenylcarboxylic acid(BPCA) derivatives, such as 4'-cyano-BPCA(c-BPCA), 4'-mercapto-BPCA(m-BPCA), and 4'-amino-BPCA(a-BPCA), which were adsorbed on Au and Ag colloid monolayers. For the systematic approach, information regarding the adsorption behavior of benzoic acid, biphenyl, and BPCA was applied to the target molecules. From the spectral behaviors of benzene ring, C-H stretching, carboxylate anion, and the other finger printing vibrational modes, it was concluded that only the m-BPCA was adsorbed tilt with thiol group being adsorbed on Au surface, whereas the other molecules were adsorbed flat on both Au and Ag surfaces.