• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.88-88
• /
• 2002

인공수정 및 수정란기술의 활성화에 따라 소에 있어서 인공수정은 90%이상이 실시되고 있으나, 수정란이식은 수정란의 생산이 안정적이지 않아 활성화에 많은 지장을 초래하고 있다. 이의 원인은 수정란이식에 의한 수태율의 저하가 가장 크며, 수태율 향상을 위하여 수란우에 progesterone, hCG 등의 주사가 실시되고 있다. 그러나 이는 수정란의 착상에 있어서 자궁의 환경을 개선한다고 하나, 착상의 정확한 기전의 구명은 미미한 상태이다. 한편 비장유래 macrophage가 황체를 자극하고 TGF-$\beta$의 생산을 유도하는 것으로 보고되고 있으며, IL-I $\alpha$와 $\beta$에 따라 TGF-$\beta$ 생산에 있어서 약간의 차이를 보이는 것으로 보고되고 있다. 따라서 본 연구는 비장유래 macrophage가 TGF-$\beta$의 생산시 임신관련 Cytokine인 IL-I$\alpha$와의 관계를 조사하기 위하여 실시하였다. 임신 및 비임신 도축 암소의 비장을 채취하여 얼음에 채워 실험실로 운반한 후 비장의 표면을 70%의 알콜로 세척하고, 표피를 벗겨 비장조직을 세절하여 10% FBS+DMEM에 넣어 조직을 눌러 짜면서 조직속의 세포를 분리하였다. 세척한 배양액은 4-5$m\ell$를 100mm 유리 petri dish에 넣고 39$^{\circ}C$, 5% $CO_2$, 95% 공기인 배양기에서 2시간이상 배양하였으며, 배양 후 냉장된 buffer A 용액으로 세척하여 유리 petri dish의 바닥에 부착된 macrophage만을 cell scraper로 분리하였다. 분리한 macrophage는 0.5-1 $\times$ $10^{6}$ cells/$m\ell$가 되게 조정하여, IL-I 을 0.001, 0.01, 0.1 또한 1 ng/$m\ell$를 첨가하여 농도에 따른 효과를 조사하였고, 각각 24, 48, 72, 96 또한 120시간을 배양하여 시간에 의한 효과도 실시하였다. 각 배치구에서 얻어진 배양액은 TGF-$\beta$를 조사하기 전까지 -2$0^{\circ}C$에 동결 보존하였다. TGF-$\beta$의 측정은 TGF-$\beta$ kit(promega, USA)를 이용하여 실시하였으며, 통계학적 분석은 Anova test를 Statview program을 이용하여 분석하였다. 시험의 결과 대조구에 비해 IL-I 첨가구는 2-3배의 TGF-$\beta$생산을 보였으며, 배양시간에 따른 생산은 시간이 지남에 따라 약간 상승하는 경향을 보였으나, 유의적인 차이를 보이지는 않았다. 또한 IL-I의 농도에 따른 생산의 변화는 IL-I의 농도에 따라 약간의 차이를 보였고 유의적인 차이는 인정되지 않았다. 임신 및 비임신의 경우 임신우의 비장 macrophage가 비임신보다는 약간 상승하는 거스로 나타났다. 이상의 결과로 볼 때 IL-I $\alpha$ 는$\beta$subunit 보다 TGF-$\beta$ 생산에 있어서 서로 다른 양상을 보일 것으로 추정되며, IL-I은 macrophage의 직접적인 영향을 주기보다는 황체세포를 매개로 한 자궁에 TGF-$\beta$의 생산을 유도하는 것으로 사료되며, 임신관련 cytokine에 대한 다양한 연구가 요구되고 있다.

• The Journal of Korean Society of Virology
• /
• v.26 no.1
• /
• pp.23-30
• /
• 1996

대략 36,000 base pairs (bp)의 두 가닥짜리 DNA를 지놈으로 가진 사람 아데노바이러스 (Ad)는 DNA 상동성(相同性) 및 생물학적/생화학적 성격이 특이한 49개의 혈청형이 알려져 있는데, 이들 대부분의 Ad가 영유아군 및 면역능이 저하된 성인에서 치사적 결과를 초래할 수 있다. Ad의 세포향성(向性)(tropism)은 매우 다양하여 종류에 따라 상기도 감염, 각결막염, 영유아 장염등을 유발하는데 최근 Ad의 다양한 병원성에 대한 원인을 분자생물학적 수준에서 규명하려는 노력의 일환으로 지역에 따라 주되게 출현하는 Ad형 규명이 활발히 이루어지고 있다. Ad 동정/확인은 표면을 이루고 있는 group 공통항원인 hexon 단백질을 탐지하는 효소면역 측정법 (EIA)에 의하며, Ad형별은 Ad fiber의 세포독성 중화시험에의 한다. 그러나, 세포독성 중화시험이 엄청난 노동력 및 시간을 요구하면서도 민감도/특이도가 만족스럽지 못하여 이를 개선하기 위하여 검체 또는 세포배양에서 Ad DNA를 추출하여 제한효소 절단형태를 비교하는 방법이 개발되었는데 이는 세포배양에 잘 자라지 않는 바이러스주의 형별뿐만 아니라 지역 분리주들의 지놈 변형주를 관찰하는 분자생물학적/분자역학적 연구에도 도움이 되고 있다. 국내에는 Ad와 관련된 소아장염의 빈도가 rotavirus에 의한 것 다음으로 빈번한데도 Ad40/41외에 주되게 출현하는 장내 Ad형들이 전혀 규명된 바 없고, 한국형 Ad들의 지놈형태가 전혀 보고된 바가 없다. 또한 세계적으로 Ad형별 조사지역이 늘어감에 따라 유아장염과 연관된 Ad 역시 Ad40, 41이 외의 형들이 Ad40, 41을 능가하는 것으로 보고되고 있는 지역도 있으나 국내에서는 Ad40, 41이외의 형들은 그 역학적 중요도가 전혀 알려져 있지 않다. 이로서 본 연구의 목적은 Ad주들에 특이 중화항체를 이용한 세포독성 중화시험과 Ad DNA 절단법을 적용하여 한국형 장내 Ad주들의 형별을 처음으로 시도함과 동시에 1989-1991사이 출현한 Ad들의 유전적 변형을 관찰하려는 것이었다. 두 방법 모두 사용하였을 때 주되게 출현하는 장내 Ad형들은 Ad4l, Ad2, Ad7, Ad5, 및 Ad40이었다. Ad40/41-양성 검체를 제외한 Ad hexon-EIA양성들의 77.5%를 형별 할 수 있었던 Ad DNA의 제한효소 절단방법은 형들간의 교차중화로 특이성이 낮았던 중화방법 (47.5%)보다 매우 효율적이어서 두 가지 방법을 함께 적응하였을 때는 40주중의 81.5%인 35주를 형별 할 수 있었다. 또한Ad DNA 제한 효소 절단방법은 Ad7 변이주 (Ad7b)도 탐지 할 수 있었다.

• Journal of Food Hygiene and Safety
• /
• v.19 no.2
• /
• pp.84-96
• /
• 2004

This study aims at developing an easily-applicable Sanitation Standard Operating Procedure(SSOP) program for Fresh raw-fish manufacturing. It compares the sanitation inspection results of SSOP-program-applied procedure and non-applied procedure. The samplings for bacteriological examination were collected from the touching surface of food and from the personal workers. The sanitation status was recorded in the check-up list. The results were statistically analyzed to ascertain the efficiency of the SSOP program. The present official KFDA check-up list for sanitation inspection is composed of 51 items. Each item is judged to be fit or unfit to the standards. When the unfit items are more than 6, the work-place is judged to be insanitary. But in this study, the results of sanitation inspection are scaled in points in the 70％ allotment, and the results of bacteriological examination are scaled in points in 30％, totaling 100％. Below 60 scores are judged to be insanitary and administratively punished; 61-75 scores are judged to be average; 76-85 good; above 86 excellent. The sanitation inspection scores by the improved check-up list went up by two grades from 71.8 (before SSOP program) to 88.6 (after SSOP program). The results of bacteriological examination also improved from 57.5 to 98.2. The total scores of both results converted in the allotment of 70％ and 30％ also showed an improvement by two grades from 66.4 (before SSOP program) to 93.4 (after SSOP program). The above results show that the manufacturers participated in this study are following the 8 essential sanitary procedures which are needed to anchor the HACCP system.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.2
• /
• pp.7-12
• /
• 2003

The $Bi_{3.3}La_{0.7}O_{12}$(BLT) capacitors with Metal-Ferroelectric-Insulator-Silicon structure were prepared on $SiO_2/Si$ substrates by using sol-gel method. The BLT thin films annealed at $650^{\circ}C$ and $700^{\circ}C$ showed randomly oriented perovskite crystalline structures. The full with at half maximum (FWHM) of the (117) main peak was decreased from $0.65^{\circ}$ to $0.53^{\circ}$ with increasing the annealing temperature from $650^{\circ}C$ to $700^{\circ}C$, indicating the improvement in the crystalline quality of the film. In addition, the grain size and $R_rms$ , values were increased with increasing the annealing temperatures, showing the rough film surface at higher annealing temperatures. From the capacitance-voltage (C-V) measurements, the memory window voltage of the BLT film annealed at $700^{\circ}C$ was found to be about 0.7 V at an applied voltage of 5 V. The leakage current density of the BLT film annealed at $700^{\circ}C$ was about $3.1{\times}10^{-8}A/cm^2$.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.38-48
• /
• 2010

Adverse weather (e.g. strong winds, snow and ice) will probably appear as a more serious and frequent threat to road traffic than in clear climate. Another consequence of climate change with a natural disastrous on road traffic is respond to traffic accident more the large and high-rise bridge zone, tunnel zone, inclined plane zone and de-icing zone than any other zone, which in turn calls for continuous adaption of monitoring procedures. Accident mitigating measures against this accident category may consist of intense winter maintenance, the use of road weather information systems for data collection and early warnings, road surveillance and traffic control. While hazard from reduced road friction due to snow and ice may be eliminated by snow removal and de-icing measures, the effect of strong winds on road traffic are not easily avoided. The purpose of the study described here, was to design of amber information the relationship between traffic safety, weather, user information on road weather and driving conditions in local-scale Geographic. The most applications are the optimization of the amber information definition, improvements to road surveillance, road weather monitoring and improved accuracy of user information delivery. Also, statistics on wind gust, surface condition, vehicle category and other relevant parameters for wind induced accidents provide basis for traffic control, early warning policies and driver education for improved road safety at bad weather-exposed locations.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.345-351
• /
• 2019

Recently, ink-jet printing technology has been applied for various industries such as semiconductor, display, ceramic tile decoration. Ink-jet printing has advantages of high resolution patterning, fast printing speed, high ink efficiency and many attempts have been made to apply functional materials with excellent physical and chemical properties for the ink-jet printing process. Due to these advantages, research scope of ink-jet printing is expanding from conventional two-dimensional printing to three-dimensional printing. In order to expand the application of ink-jet printing, it is necessary to optimize the rheological properties of the ink and the interaction with the substrate. In this study, photo curable ceramic complex ink containing nano silica particles were synthesized and its printability was characterized. Contact angle of the photo curable silica ink were modified by control of the ink composition and the surface property of the substrate. Effects of contact angle on printing resolution and three-dimensional printability were investigated in detail.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.69-76
• /
• 2016

Current driving capability of MCT (MOS Controlled Thyristor) is determined by turn-off capability of conducting current, that is off-FET performance of MCT. On the other hand, having a good turn-on characteristics, including high peak anode current ($I_{peak}$) and rate of change of current (di/dt), is essential for pulsed power system which is one of major application field of MCTs. To satisfy above two requirements, careful control of on/off-FET performance is required. However, triple diffusion and several oxidation processes change surface doping profile and make it hard to control threshold voltage ($V_{th}$) of on/off-FET. In this paper, we have demonstrated the effect of $V_{th}$ adjustment ion implantation on the performance of MCT. The fabricated MCTs (active area = $0.465mm^2$) show forward voltage drop ($V_F$) of 1.25 V at $100A/cm^2$ and Ipeak of 290 A and di/dt of $5.8kA/{\mu}s$ at $V_A=800V$. While these characteristics are unaltered by $V_{th}$ adjustment ion implantation, the turn-off gate voltage is reduced from -3.5 V to -1.6 V for conducting current of $100A/cm^2$ when the $V_{th}$ adjustment ion implantation is carried out. This demonstrates that the current driving capability is enhanced without degradation of forward conduction and turn-on switching characteristics.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.1
• /
• pp.27-35
• /
• 2008

Characterization of mineralogy and nanocrystals of ingredient materials of $Lumilite^{(R)}$ used for water treatment was made using optical microscopy, XRD, SEM, FTIR, and XRF analyses. Constituent minerals identified by XRD and microscope are clinoptilolite, illite, quartz, and albite, characterized by dense and fine texture. The cross section of nanocrystals with the size $70{$\sim}100\;nm$ is generally round or subround. Numerous spheroids with few nanometers in diameter are extensively formed on the surface of nanocrystals. Bulk chemistry is $SiO_2$ $74.22{\sim}75.65\;wt.%$, $Al_2O_3$ $13.25{\sim}13.72\;wt.%$, CaO $4.23{\sim}5.15\;wt.%$, with other major elements being minimal. When heated to $700^{\circ}C$, the crystal structure was mostly destroyed, though it persisted to $500^{\circ}C$. It is likely that high capacity and applications of $Lumilite^{(R)}$ for water treatment are originated from its structural properties such as development of nanocrystals and various tiny pores.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.11
• /
• pp.589-600
• /
• 2002

Deformable models offer an attractive approach for extracting three-dimensional boundary structures from volumetric images. However, conventional deformable models have three major limitations - sensitive to initial condition, difficult to represent complex boundaries with severe object concavities and protrusions, and self-intersective between model elements. This paper proposes a deformable model that is effective to extract geometrically complex boundary surfaces by improving away the limitations of conventional deformable models. First, the proposed deformable model resamples its elements hierarchically based on volume image pyramid. The hierarchical resampling overcomes sensitivity to initialization by extracting the boundaries of objects in a multiscale scheme and enhances geometric flexibility to be well adapted to complex image features by refining and regularizing the size of model elements based on voxel size. Second, the physics-based formulation of our model integrates conventional internal and external forces, as well as a non-self-intersecting force. The non-self-intersecting force effectively prevents collision or crossing over between non-neighboring model elements by pushing each other apart if they are closer than a limited distance. We show that the proposed model successively extracts the complex boundaries including severe concavities and protrusions, neither depending on initial position nor causing self-intersection, through the experiments on several computer-generated volume images and brain MR volume images.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6977-6984
• /
• 2015

It is faced with the necessity of multi roll forming process of the ball slide rail which is made by adding the separate manufacturing processes, piercing, bending, trimming, to the roll forming process of a continuous plastic deformation, to improve the quality. However, the vibration and noise of the press machine in this process leads to the quality degradation of slide rail manufactured in this process. In this study, the roll was designed considering the optimal strain rates by the roll forming program with finite element method. And to estimate the static stability of the multi process the Von-Mises stress and deformation on the press was calculated with a structural analysis program. Also, to avoid driving systems in the resonance region their natural frequencies in the 1st and 2nd mode were calculated through the modal analysis. To verify its dynamic stability improvement the magnitudes of noise and vibration in the existing and studied system were compared using a microphone and accelerometers. And the widths and surface roughnesses of the rails which had been produced in the existing and studied process were measured. Therefore, it is known that multi roll forming process is stable in the analytical and experimental study.