• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.1
• /
• pp.111-115
• /
• 2009

Carrots were dried using 30, 50, and 80% polyethylene glycol (PEG) or maltodextrin as a dehydrating agent, and the dried carrots were compared with the freeze dried and hot-air dried in terms of rehydration ratio, color, carotene content, and sensory evaluation. The amount of moisture loss during drying of carrots using PEG or maltodextrin increased with increasing concentration of dehydrating agent. Rehydration ratio as well as carotene content of the PEG-treated carrots were greater than those of freeze-dried or hot-air dried carrots. Regarding color and sensory evaluation of the dried carrots, the PEG-treated and maltodextrin-treated carrots were better than freeze-dried or hot-air dried carrots. These results suggest that drying of carrots using PEG or maltodextrin is a very efficient method because of its good rehydration capacity and minimal destruction of nutrients and cell structure.

• Journal of Korea Foresty Energy
• /
• v.20 no.2
• /
• pp.41-45
• /
• 2001

Japanese Larch(Larix kaempferi) was treated with aqueous solutions(30%, 40%, 50%) of polyethylene glycols(PEG, #1000, #1500, #4000, #6000) for the dimensional stabilization. The antiswelling efficiency(ASE) was measured for the evaluation of the dimensional stabilization. The weight percent gains(WPGs) of the woods treated with 40% solutions were higher than those of the others, and the highest WPG was achieved by treatment with 40% solution of PEG #1500. The ASE decreased with increasing molecular weight of PEG. ASE of woods treated with PEG #1000 and PEG #1500 were higher than those of the others.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.6
• /
• pp.590-596
• /
• 1999

The effects of additives on the Zn electrodeposition in chloride-based electrolyte were investigated using circulation cell with three electrodes system. The cathodic polarization increased with the addition of polyethylenglycol (hereafter PEG) in electrolyte. This was attributed to the adsorption of the additives on the electrode and the inhibition of migration of metal ion. The PEG, however, did not have any noticeable effect on the properties of plating solutions at the concentration used. The effect of PEG on the electrocrystallization was related to its molecular weight. With the increase of molecular weight, the cathodic polarization increased, while the surface roughness was improved with the decrease of brightness. Especially, the PEG mixed with different molecular weights was the most effective. The orientation and the type of the deposited grains were changed and refined by PEG, which resulted in the modification of deposited surface roughness and brightness.

• Journal of the Korean Chemical Society
• /
• v.53 no.4
• /
• pp.415-421
• /
• 2009

A convenient and practical synthesis of 1, 8-dioxo-octahydroxanthene derivatives using various aldehydes, 5, 5-dimethyl-1, 3-cyclohexanedione in water was successfully carried out in the presence of polyethylene glycol (PEG) as a catalyst. Simple work-up, clean products, high yields and water as a green solvent are the attractive features of this methodology.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.665-670
• /
• 2001

The solvent extraction of polyethylene glycol (PEG) by ethanol has been studied for the powder injection molded compacts of Sr-ferrite/PEG/carnauba wax/HDPE. The extraction rate of PEG is sensitively proportional to the solvent temperature whereas it is inversely proportional to the contents of PEG, the molecular weight of PEG. and the specimen thickness. The high extraction rate of PEG is achieved under the following conditions: solvent temperature of $70^{\circ}C$, PEG contents of 30%, and PEG molecular weight of 400 g/mol. In the early stage of solvent extraction, the non-linear relationship between the extraction rate and the square root of the extraction time indicates that the extraction of PEG does not follow the Fickian behavior. At extraction times longer than 180 min. however, the extraction of PEG follows the Fickian behavior. The extraction fate of PEG by ethanol is about$1.0{ imes}10^{-6}g/cm^2sec$ enough for common applications.

• 한국전기화학회:학술대회논문집
• /
• 2000.10a
• /
• pp.18-18
• /
• 2000

• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.614-619
• /
• 2015

A plasma surface modification of powders has been carried out in a circulating fluidized bed reactor under reduced pressure. Polystyrene (PS) particles treated by plasma are grafted with polyethylene glycol (PEG) on the surface. The virgin, plasma-treated and grafted powders were characterized by DPPH method, FTIR, SEM and contact angle meter. The plasma-treated PS powders have well formed peroxide on the surface, By PEG grafting polymerization, PEG is well grafted and dispersed on the surface of the plasma-treated PS powders. The PEG-g-PS particle was successfully synthesized using the plasma circulating fluidized bed reactor under reduced pressure.

• Journal of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.197-202
• /
• 1990

Polyethylene glycol (PEG) grafted poly γ-benzyl L-glutamate (PBLG) were prepared from esterification or substitution reaction of PBLG with PEG having hydroxyl group at one end or primary amino groups at both ends. The viscosity of these polymer solution was decreased with decrease of polymer concentration. But in more dilute solution the viscosity was increased with decrease of polymer concentration. PEG-grafted PBLG polymers showed smaller water contact angles than PBLG homopolymer, and the water contact angles of the surface of PEG-grafted PBLG polymers were largely dropped by reacting with aminoethanol, resulting in hydrogel surfaces.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.7
• /
• pp.1024-1029
• /
• 2010

Opuntia ficus-indica and Aloe vera slices were dried using 20, 30, and 40% polyethylene glycol (PEG) 4,000 as a dehydration agent, and the dried samples were compared with the hot-air dried and freeze dried in terms of rehydration ratio, color, and sensory evaluation. The moisture content of the PEG-treated samples decreased with increasing concentrations of polyethylene glycol. The rehydration ratio of the PEG-treated samples was better than those of the hot air-dried or freeze-dried samples. The color of the PEG-treated samples was similar to that of the freeze-dried samples and better than that of the hot air-dried samples. The sensory evaluation of PEG-treated samples was better than those of the hot air-dried or freeze-dried samples. These results suggest that dehydration of Opuntia ficus-indica and Aloe vera slices using PEG is very effective in terms of rehydration ratio and minimal damage of cell structure.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.84-90
• /
• 2009

Nitinol alloy (TiNi) has been widely used in vascular stents. To improve the blood compatibility of Nitinol alloy, its surface was chemically modified in this study. Nitinol was first coated with gold, then chemisorbed with L-cysteine (C/N), and followed by grafting of zwitter ionic poly(ethylene glycol) (PEG) (PEG-$N^+-SO_3{^-}$) to produce TiNi-C/N-PEG-N-S. The zwitter ionic PEG grafted on the Nitinol surface was identified by ATR-FTIR, ESCA and SEM. The hydrophilized surface was proven by the decrease of water contact angle. In addition, from the blood compatibility tests such as protein adsorption, platelet adhesion, and blood coagulation time, the surface-modified TiNi alloy exhibited a better blood compatibility as compared to the untreated Nitinol control. These results indicated a feasibility of synergistic effect of hydrophilic PEG and antithrombotic zwitter ion.