• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.360-366
• /
• 2002

The electrospinning of polyacrylonitrile dissolved in N,N-dimethyl formamide (DMF) successfully produced nano-scale fibers. The processing parameters such as charged voltage, velocity of collected roller, and tip-to-collector distance (TCD) , affected the ultimate fiber size. At TCD of 5 cm, the average tiber diameter increased with increasing charged voltage because of the more aggregation between fibers due to the remaining DMF solvent on the fiber surface. But, at TCD of 9 cm, the average fiber diameter decreased as the charged voltage was increased because of complete evaporation of DMF. Also, the fiber diameter decreased with increasing the velocity of collected roller. Cross direction width (CWD) of nonwoven mat increased with decreasing the charged voltage and with increasing TCD.

• Polymer(Korea)
• /
• v.28 no.6
• /
• pp.487-493
• /
• 2004

The distribution of particles, in the mixture of poly(ethyl acrylate-co-t-butyl acrylate) (PEB) emulsion polymer and silica nanoparticles, was determined mainly depending on the pH of the mixture. The weak interfacial interaction was responsible for the severe coagulation of silica particles and the irregular dispersion for these nanocomposites. Methacryloxypropyltrimethoxysilane (MPS) was used to modify both the polymer and the silica. The nanocomposites which were prepared with these modified components had finer dispersion of silica nanoparticles and core-shell morphology due to the strong interfacial interaction. The strong hydrogen bonds were identified for these nanocomposites with FT-IR. The nanocomposites having strong interfacial interaction showed the increased glass transition temperature, the decreased ΔC$_{p}$ , and the increased decomposition temperature of the polymer chains. polymer chains.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.411-416
• /
• 2011

NCO terminated polyurethane prepolymers were synthesized from isophorone diisocyanate(IPDI), polycarbonate diol(PCD) and dimethylol propionic acid(DMPA). Subsequently, acrylic terminated prepolymers were prepared by capping the NCO groups of polyurethane prepolymers with different moles of pentaerythritol triacrylate (0~0.024 moles) as a acrylate monomer. The average particle size of the acrylic terminated polyurethane solutions was increased with increasing PETA contents. Also, the prepared coating films showed better abrasion resistance and pencil hardness than pure waterborne polyurethane.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.191-197
• /
• 2012

Acrylic terminated polyurethane prepolymers were synthesized by capping the NCO groups of polyurethane prepolymers, prepared from isophorone diisocyanate (IPDI), polycarbonate diol (PCD) and dimethylol propionic acid (DMPA), with pentaerythritol triacrylate (PETA). Subsequently, silylated acrylic terminated prepolymers were prepared by capping the NCO groups of acrylic terminated polyurethane prepolymers with different types of silane coupling agents, glycidoxypropyl trimethoxysilane (GPTMS) or aminopropyl triethoxysilane (APS). The average particle size of pure waterborne polyurethane solution, measured by the dynamic light scattering method, was increased from 14.3 nm to 208.6 nm by adding PETA and APS. Also, the coating film of silylated acrylic terminated waterborne polyurethane showed better abrasion resistance and pencil hardness than that of pure waterborne polyurethane.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.342-347
• /
• 2005

Photocurable hyperbranched acrylates were prepared from acrylic acid and hyperbranched polyol (HBP-16, 32, 64). Physical properties of three kinds of photocurable hyperbranched acrylated were investigated. Thermal stability of UV cured film measured by TGA shifted to higher temperature with increasing of functionality. Hardness, abrasion resistance, and tensile strength of UV cured film also increased with increasing functionality of acrylate. Weathering test for UV cured film showed the value of yellow index increased with increasing functionality of acrylate.

• 한국전기화학회:학술대회논문집
• /
• 2001.06a
• /
• pp.189-192
• /
• 2001

In order to prepare the proton-conducting membrane with lower cost and higher ionic conductivity than commercialized one, the concept of incorporating the nitrogen acid to polymer backbone, is proposed. The synthesis, thermal, and temperature-variable impedance/electrical conductivity studies of poly (p-tolunesulfonylamido acrylate) are reported. This polymer can be prepared by reacting poly (acryloyl chloride) with ptolunesulfonamide and cast into homogeneous membranes. Thermogravimetric analysis (TGA) shows that the polymer is thermally stable up to about $200^{\circ}C$ and Differential scanning calorimetry (DSC) illustrates that the glass transition occur at around $67^{\circ}C$. The ionic conductivity measured by dielectric spectroscopy is in the range of $10^{-5}\;S/cm$ in dry atmosphere that it can be a candidate for the membrane of PEMFC or DMFC.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.99-106
• /
• 2010

We have investigated the rheological behaviours of emulsions containing polymers. The polymers used in this study were polyacrylamide and carboxy vinyl polymer. The emulsion with polyacrylamide shows better prior preference than that with carboxy vinyl polymer on the skin texture. In the toxicity test, such as, LLNA cell toxicity, skin organ culture and human patch test, polyacrylamide was the appropriate materials for the cosmetics. The viscosity of polyacrylamide shows maximum value in neutral pH and good stability against temperature. The decreasing effect of viscosity against salt was not good enough but showed a better result than that of carboxy vinyl polymer. Two times the amount of polyacrylamide should be used for the formation of a similar viscosity of carboxy vinyl polymer. Yield value of polyacrylamide was low and the effect for the stabilizing emulsions was also low.

• Applied Biological Chemistry
• /
• v.34 no.2
• /
• pp.86-93
• /
• 1991

cis-Diamminedichloroplatinum(II)(CDDP), an antitumor drug, did not generate crosslink between bluetongue virus (BTV) capsid protein at moderate concentration. Cesium chloride density gradient centrifugation study revealed that protein-RNA crosslink was not detectable in CDDP treated BTV. CDDP treated BTV ds RNA showed remarkable change in the migration pattern in polyacrylamide gel electrophoresis. These results suggest that the reduction of BTV core associated transcriptase activity is most likely by the CDDP adduction to the genomic ds RNA rather than by the protein-RNA crosslink and/or protein-protein cross-link.

• The Korean Journal of Rheology
• /
• v.9 no.4
• /
• pp.183-189
• /
• 1997

본 연구에서는 고분자용액을 분산매로한 현탁액 내에서 입자의 수력학적확산에 관 한 실험적인 연구를 수행하여다. 입자로는 평균직경 275마이크론의 polymethlmethacrylate (PMMA)구형입자를 사용하였고, 분산매로는 PMMA 입자와 밀도르 맞춘 글리세린과 에틸 렌글리콜의 혼합용액에 고분자를 첨가하여 사용하였다. 고분자로는 분자량 6백만의 시약용 폴리아크릴아마이드를 사용하였다. 입자농도는 50%이었다. 용액의 농도는 0∼700ppm이었으 며 이러한 용액은 전단박화현상을 나타내지 않았다. 확산계수는 쿠엣장치 내에서 입자가 두 원통사이에서 아래쪽의 빈 공간으로 확산할 때 시간에 따른 점도측정결과로부터 예측하여 다. 본 연구의 결과 뉴튼성유체의 경우와는 달리 무차원확산계수(D/2)가 일정하지 않으며 전단율이 증가될수록 점점 감소하는 현상을 나타내었다. 고분자의 농도가 증가하는 경우에 는 무차원 확산계수가 감솨는 것을 볼수있었다. 이러한 무차원 확산계수의 감소는 유동하는 현탁액 내에서 입자간의 상호작용이 뉴튼성유체에 비하여 가역적인 것에 기인하는 것으로 판단된다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.134-137
• /
• 2003

탄소섬유나 활성탄소섬유(activated carbon fiber, ACF)는 일반적으로 출발물질에 따라 polyacrylonitrile(PAN)계, 아크릴(acryl)계, 피치(pitch)계, 페놀(phenol)계 등으로 분류할 수 있다. 보통 습식, 용융 혹은 용융분사(melt-blown) 방사 방법에 의해 섬유 형태로 형성한 다음 산화성 가스 분위기에서 불융화 과정을 거쳐 열에 대한 안정성을 부여하여 불활성 분위기에서 탄소화하여 탄소섬유를 제조하거나, 수증기나 이산화 탄소와 같은 산화성 분위기에서 활성화하여 활성탄소섬유를 제조한다. (중략)