• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.191-194
• /
• 2002

완전히 가수분해 된 폴리비닐알콜(PVA)는 쉽게 결정화되기 때문에 일부 가수분해된 PVA보다 에멜전 안정화와 계면활성이 약하다$^{1)}$ . 이러한 성질을 개선하려면 폴리비닐알콜분자에 hydrophobic한 알킬기를 도입하는 것이 주요한 방법이다. 폴리비닐알콜 분자에 긴 알킬기를 도입하는 방법에는 chain transfer 반응을 통하여 폴리비닐아세테이트(PVAc)분자의 말단에 긴 알킬기를 도입한 후 가수분해하는 방법$^{1)}$ ; 비닐아세테이트 (VAc)가 긴 알킬리를 가진 비닐 단량체와 copolymerization 한 후 가수분해하는 방법 $^{2),3)}$ ; 합성된 PVA가 긴 알킬리를 긴 알킬리를 가진 acyl chloride와 직접 반응하여 얻는 방법$^{4)}$ 등이 있다. (중략)

• Membrane Journal
• /
• v.6 no.4
• /
• pp.242-249
• /
• 1996

To improve pervaporation performance of water/ethanol mixtures, chitosan/poly(vinyl alcohol) blended and phosphorylated chitosan composite membranes were prepared. Chitosan/poly(vinyl alcohol) blends were prepared with various blend ratios and then crosslinked with glutaraldehyde by two methods. With increasing crosslinking agent content and crosslinking times separation factor increased and permeate flux decreased. Separation factor of the membrane which contains glutaraldehyde as a crosslinking agent was higher than that of the membrane surface crosslinked. Phosphorylated chitosan was prepared with various reaction times and composite membrane was prepared. As reaction times increased, the separation factor increased with high affinity for water.

• Membrane Journal
• /
• v.12 no.4
• /
• pp.255-261
• /
• 2002

Poly(vinyl alcohol) (PVA) membranes crosslinked with poly(acrylic acid-co-maleic anhydride) (PAM) as a polymeric crosslinking agent were prepared to investigate the pervaporation performance for the dehydration separation of aqueous ethanol solution. The characteristics of the resulting membranes crosslinked(x) were analysed by FT-IR and water swelling test. The water swelling decreased with increasing crosslinking agent content. The crosslinked PVA membranes with PAM showed lower water swelling than those of PVA membrane crosslinked with glutaraldehyde and modified PVA membrane. The swelling of water molecules in the crosslinked PVA membranes is more restricted by both chemical crosslinking between PVA and polymeric crosslinking agent chains and physical crosslinking by the entanglement between the PVA and polymeric crosslinking agent chains. For the pervaporation of aqueous ethanol solution through the crosslinked membrane, as the contents of crosslinking agent increased, the separation factor increased while the permeation flux decreased. The separation factor slightly decreased and permeation flux increased with increasing feed water content. As a result it could be considered that PVA-PAM membranes suppressed the plasticization effect even in the range of high water concentration in fled.

• Clean Technology
• /
• v.20 no.3
• /
• pp.251-255
• /
• 2014

PVA gel beads were made by immobilization of thenoyltrifluoroacetone (HTTA) and trioctylphoshineoxide (TOPO) with poly vinyl alcohol (PVA). The prepared PVA gel beads were used for the removal of $Cu^{2+}$ from aqueous solution. The removal characteristics of $Cu^{2+}$ by PVA gel beads was found to follow the pseudo-second-order kinetic equation. The maximum removal capacity calculated from Langmuir isotherm equation was 9.59 mg/g. The optimal pH was in the range of 3.5~6. Even when the PVA gel beads were reused 5 times, the leakage of extractant and the damage of PVA gel beads was not observed.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.04a
• /
• pp.42-44
• /
• 1999

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.37-40
• /
• 2002

폴리비닐알콜(Poly(vinyl alcohol)(PVA))은 매우 넓은 온도 범위에서 물에 쉽게 용해될 수 있는 친수성 고분자로 우수한 생체적합성을 가진 합성고분자 중에 하나이다[1]. 이러한 PVA는 단량체의 호변이성질화로 인하여 대부분 알데하이드 형태로 존재하기 때문에 비닐에스테르계열의 단량체를 중합하여 비누화시켜 제조하는 것이 일반적인 방법으로 알려져있다[2]. 최근 생체적합성을 가진 합성고분자에 대한 관심이 부각되면서 PVA에 대한 연구가 활발히 진행되고 있는데, 이는 PVA가 다른 합성고분자에 비하여 비교적 구조가 간단하고, 또한, 측쇄에 존재하는 수산기에 의하여 다양한 물성을 나타내기 때문이다. (중략)

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.178-185
• /
• 2021

In this study, polyvinyl alcohol (PVA) and polypropylene glycol (PPG)-based polyurethane dispersion resin for wound coating was synthesized. And the physical properties of the sample were coated on the surface of the film sample and the leather (Full-Grain) to study the physical properties change. In the case of tensile strength, PUD-PA1, which reacted with the least amount of PVA, showed the highest resistance at 2.00 kgf/㎟. Likewise, the rate of elongation was measured as high as 554% for PUD-PA1, which reacted with the least amount of PVA. The abrasion resistance measurement result showed that as the PVA response increased, the strength of the surface decreased to 36.77 mg.loss.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2010.04a
• /
• pp.193-193
• /
• 2010

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05b
• /
• pp.199-202
• /
• 2004

DMFC 성능을 개선시키기 위한 연구의 큰 영역은 고분자전해질막에 있으며 methanol crossover에 대한 영향을 최소화시킬 수 있는 소재개발이 우선적으로 요구되는 실정이다. 이러한 문제의 해결을 위해 Pivovar와 Cussler [1] 등은 투과증발 막분리공정에서 메탄올 저항체로 잘 알려진 폴리비닐알콜(poly vinyl alcohol, PVA)를 이용한 전해질막 연구를 하였다.(중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.531-532
• /
• 2007

See Full Text