• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.886-892
• /
• 2000

Poly(4-vinyl phenol) (PVPh) was neutralized by LiOH and PVPh ionomers (PVPh-Li) with different Li neutralization extents were synthesized. The variation in $T_{g}$ with Li neutralization was determined by DSC and the results show that the $T_{g}$ increases by 3.$8^{\circ}C$ per Li mol%. When comparing this result with the 3.$2^{\circ}C$ per Na mol% reported for poly (styrene-co-hydroxy styrene), the greater value for PVPh-Li may be due to a strong interaction between unneutralized free -OH and -OLi produced. No distinct small angle X-ray scattering (SAXS) peak was observed for these PVPh ionomers in bulk. In the 50/50 blend of PVPh-Li with PVPh, the miscibile blend was obtained when the Li neutralization in PVPh-Li was 10 mol%. On the contrary, the 50/50 PVPh-Li/PMMA was immiscible when the Li neutralization was 5 mol%. It can be concluded that, even if the starting blend is miscible owing to hydrogen bonding, the miscibility of blend becomes diminished by introducing small amount of ion groups into one of the constituent polymers and the blend can be immiscible as long as any new strong intermolecular ion-dipole interaction is not generated.

• Journal of the Korean Chemical Society
• /
• v.36 no.1
• /
• pp.87-94
• /
• 1992

The elution behavior of polystyrenes(PS), polymethylmethacrylates (PMMA), polybutadienes(PB), PS-PMMA(SM) block copolymers and PS-PB star shaped copolymers on the cross-linked polystyrene gels was studied. An interpretation was proposed for the plots of log hydrodynamic volume versus retention volume of solutes in the mobile phases such as tetrahydrofuran, toluene, chloroform, methylene chloride and tetrahydrofuran-cyclohexane mixture. In order to predict the retention of solutes from their physical properties, multiple stepwise regression analysis was applied to obtain the correlation. The distribution coefficients($K_p$) of solute-gel interactions in GPC for homopolymers and PS copolymers were also obtained in terms of network-limited separation mechanism. In the cases of PS and PB, $K_p$ values approach unity, while $K_p$ values for PMMA decrease as MW increase in the good solvent, but in poor solvent, $K_p$ values increase as MW increase. $K_p$ values of PS copolymers are dependent on their MW and composition, therefore, morohology of SM block copolymer is predicted to be random phase. A single universal plot of log[η]M vs. $(V_r-V_o)/K_p$

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.4
• /
• pp.257-261
• /
• 2000

Monodisperse polymer particles have many industrial applications such as surface coatings for metal panels, chromatographic media, spacers for liquid crystal display panel, and fillers for cosmetics, etc.. Micron-size monodispersed poly(methyl methacrylate) particles were prepared by dispersion polymerization in methanol medium in the presence of poly(vinyl pyrrolidone) and 2,2'-azobis(isobutyronitrile) as steric stabilizer and initiator, respectively. Effects of polymerization parameters, such as monomer and initiator concentration, stabilizer type and concentration, solvent composition on average particle size and size distribution were studied.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.8 s.185
• /
• pp.185-194
• /
• 2006

In this paper, three dimensional finite element analyses have been performed to investigate the biomechanics of vertebroplasty in patient accurate FE models have been constructed from CT images of a PMMA injected vertebra. In order to apply various material properties of the spine(T12), the functional relation between the well known apparent density and HU(Hounsfield unit) from CT image were employed and thus real material properties can be assigned to each element of FE model. The FE analysis showed similar results with the experiments. With this approach accurate analysis of the vertebroplasty and its clinical applications can be expected.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.542-547
• /
• 2010

n-Paraffin and saturated fatty acid methyl esters in the diesel and bio-diesel fuel crystallize at low temperature. Many articles have addressed various solutions for the low temperature crystallization problem and one of them is the use of methacrylate copolymers. In this work, we synthesized a series of copolymers in the reaction condition of 70 : 30 molar ratio of lauryl methacrylate (LMA) (or stearyl methacrylate (SMA)) and alkyl methacrylates. The structures of the copolymers were characterized by $^1H$-NMR and FT-IR spectroscopy, and the molecular weight of copolymers were obtained from Gel Permeation Chromatography (GPC) method. The concentrations of additives were 500~1000 ppm and 1000~10000 ppm in diesel fuels and bio-diesel fuel (BD5 and BD20), respectively. The addition of copolymers changes the many properties of fuel such as the pour point (PP), cloud point (CP) and cold filtering plugging point (CFPP). For example, the low temperature properties of the copolymers containing SMA ($PSMAmR_2n$) were excellently improved about 15, 7, and $10^{\circ}C$ for PP, CP and CFPP, respectively.

• Composites Research
• /
• v.30 no.5
• /
• pp.288-296
• /
• 2017

The focus of this study is to experimentally investigate the heat dissipation characteristics of poly (methyl methacrylate) (PMMA) composite films with phase change materials (PCM) to resolve heat build-up problems encountered in various electronic devices. In this study, two different types of phase change materials were used to fabricate the composite films by compression molding method and PCM paste sealing method then compared. It was observed in this study that the heat dissipation capability of PCM/PMMA composite films was remarkably enhanced by applying graphite sheet or graphene film into the composite due to their high thermal conductivity. These PCM/ PMMA composite films were attached on the hot spot inside smart phone and tested its surface temperature change according to time. The heat dissipation capability of PCM/PMMA composite film incorporated smart phone was increased 154% and hybrid PCM/PMMA composite film incorporated smart phone was increased 286% over the reference, respectively.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.2
• /
• pp.89-96
• /
• 2018

Purpose: The aim of this study was to evaluate the effect of delayed time, surface treatment, and repair materials on repair of bis-acryl composite resin through comparison of shear bond strength and to evaluate the utility of bis-acryl composite resin repair using polymethyl methacrylate resin. Materials and Methods: A total of 90 bis-acryl composite resin specimens were fabricated and classified into 9 test groups, each of 10 pieces according to delayed time, surface treatment and repair material. The shear bond strength of each specimen was measured using a universal testing machine immediately after fabrication and analyzed using a statistical analysis program (IBM SPSS statistics 20). After the shear bond strength measurement, the fracture surface of the specimen was observed. Results: The highest shear bond strength ($17.54{\pm}3.14MPa$) was observed in the experimental group bonded immediately with a light-curing flowable composite resin using a bonding agent. Conclusion: When repairing bis-acryl composite resin, it is necessary to consider whether to remake according to the delayed time. For effective repair, it is desirable to consider appropriate materials and surface treatment methods according to the site or purpose of use.

• Polymer(Korea)
• /
• v.30 no.5
• /
• pp.385-390
• /
• 2006

In this work, the effect of carbon nanofiber (CNF) on thermal properties, and friction and wear behavior of CNF/PMMA composites were examined. While thermal properties of the composites were investigated with differential scanning calorimetry, thermograyimetric analyzer, and dynamic mechanical analyzer friction and wear behaviors were examined using a friction and wear tester. The glass transition temperature (Tg), integral procedural decomposition temperature (IPDT), storage modulus (E'), and tan ${\delta}$ appeared at higher temperatures with increasing CNF content, which were probably attributed to the presence of strong interactions between the carbonaceous fillers and the PMMA resins matrix. The wear loss in the composites decreased at 0.1 wt% CNF and then increased with 5-10 wt% CNF content. This was due to the existence of large aspect ratio CNF in PMMA which led to an alignment of PMMA chains and an increase of mechanical interlocking, resulting in the formation of crosslinked structures between CNF and PMMA in the composite.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.490-495
• /
• 2009

The reactive compatibilization of amorphous poly-${\alpha}$-olefins (APAO)/amorphous polyamide (aPA) blends was carried out using two kinds of reactive compatibilizers such as maleated polypropylene and ethylene-glycidyl methacrylate-methyl acrylate copolymer. The grafting reaction rates between aPA and the compatibilizers were examined using FT-IR, SEM and rheometer. The effect of the reactive compatibilization on the mechanical property of the blends was investigated with a universal testing machine. The adhesion strength of the blends including a hydrocarbon tackifier resin, C9 was also measured.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.12
• /
• pp.1111-1120
• /
• 2010

A variety of materials may be used for soundproof panels. The major advantage of transparent material over traditional materials in noise barriers is aesthetics. The transparent panel materials such as clear plastic or glass are an ideal way of reducing or virtually eliminating the visual impact of a noise barrier. With the use of transparent materials, the drivers' view of the roadside and the sunlight penetration to the highway would not be blocked. Korean Industrial Standards for soundproof panels have been established. But, transparent soundproof panels are not included in this standards. And, some specifications provide only a few basic characteristics for transparent soundproof panels. To develop guidelines on quality criteria for transparent soundproof panel, their mechanical properties such as wind load resistance, safety under impact, and abrasion resistance were experimentally investigated.