• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.3
• /
• pp.42-52
• /
• 2010

The purpose of this study is to produce digital elevation model (DEM) in the Jebu tidal flat, one of the west coast of the Korean Peninsula, by means of photogrammetric techniques from aerial digital stereo-images. Produced DEM would be become the fundamental data for change detection of the sediment and erosion. To do so, epipolar line is established by relative orientation. Area-based matching is then carried out based on this line and matching size according to surface property of tidal flat after a classified image is produced from reflectance and texture of the surface. As the results, DEM generated by the proposed method showed subtle changes in height more precisely than DEM using the fixed matching size and DEM by the commercial S/W in the region, such as tidal flats having few level differences.

• Analytical Science and Technology
• /
• v.8 no.1
• /
• pp.17-23
• /
• 1995

The determination method of 2-mercapto-1-methyl-imidazole(MMI) in $5.0{\times}10^{-2}M$ lithium perchlorate solution has been investigated by the differential pulse polarography. The optimum conditions for the determination of MMI were as fellows; -0.9 volt(vs. Ag/AgCl) initial potential, 80mV pulse height, 2mV/sec scan rate, and medium mercury drop size. The calibration curve showed a good linearlity in the range of $1.0{\times}10^{-7}M$ to $8.0{\times}10^{-5}M$ and the detection limit was $2.2{\times}10^{-9}M$. This method was applicable to the determination of MMI in thyroid drugs without interference from the additives.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.359-365
• /
• 2008

This paper focused on generation of more accurate DEM and analysis of accuracy. For this, we applied suitable sensor modeling technique for each satellite image and automatic pyramid matching using image pyramid was applied. Matching algorithm based on epipolarity and scene geometry also was applied for stereo matching. IKONOS, Quickbird, SPOT-5, Kompsat-2 were used for experiments. In particular, we applied orbit-attitude sensor modeling technique for Kompsat-2 and performed DEM generation successfully. All DEM generated show good quality. Assessment was carried out using USGS DTED and we also compared between DEM generated in this research and DEM generated from common software. All DEM had $9m{\sim}12m$ Mean Absolute Error and $13m{\sim}16m$ RMS Error. Experimental results show that the DEMs of good performance which is similar to or better than result of DEMs generated from common software.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.114-114
• /
• 2018

탄소 재료는 뛰어난 물성에서 다양한 재료로의 응용이 기대되고 있다. 특히, 이종 원소 함유 카본 재료는 전기적 특성과 촉매성의 발현 등 새로운 기능을 카본 재료에 부여할 수 있어서 연료 전지, 에너지 저장, 태양 전지 등에의 응용이 기대되고 있다. 최근, 용액 중의 저온 플라즈마인 솔루션 플라즈마(solution plasma process)를 이용하여 벤젠 용액 등에서 탄소 재료 합성에 성공하였다. 그러나 기존의 연구에서는 솔루션 플라즈마 프로세스를 이용하여 합성한 이종원소 카본은 전도성이 낮아 이종원소의 함유량을 낮추는 고온의 열처리가 필요했다. 따라서 본 연구에서는 우수한 물리적 전기적 특성을 갖는 그래핀(graphene)과 같은 이종 원소 카본 나노시트(heteroatom carbon nanosheets)의 합성 및 메커니즘(mechanism)에 대해 검토하였다. 다양한 이종원소를 포함한 유기용매 안에 바이폴라 펄스 전원에 의한 전압을 두 텅스텐 전극 간에 인가하고, 솔루션 플라즈마를 생성하여 이종원소 카본 재료를 합성했다. 플라즈마 생성은 텅스텐 봉을 전극으로 사용하고 전압을 2.0 kV, 펄스 주파수를 200 kHz, 펄스 폭을 $1.0{\mu}s$, 전극 간 거리를 1.5 mm에서 일정하게 유지하며 200 mL 유기용매 중에서 방전시키는 것으로 재료를 합성했다. 플라즈마 방전 후, 필터을 이용하여 흡인 여과한 뒤 $200^{\circ}C$에서 1 시간 동안 건조 시켰다. 건조 후의 이종원소 카본의 물리적 특성을 원소 분석, X선 회절 법(XRD), 저항률 측정, 투과형 전자 현미경(TEM) 및 라만 분광법, 전자 현미경(SEM), X-선광전자분광기(XPS)등을 이용하여 카본의 형상 및 특성을 분석하였다. 그 결과 다양한 이종원소를 포함한 유기용매 중 2-pyrrolidone을 사용했을 때, 이종 원소 카본 나노시트를 합성하는데 성공하였다. 또한, 이 연구방법을 통해서 솔루션 플라즈마 프로세스를 통한 카본 나노시트 합성의 메커니즘을 규명하였다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.2
• /
• pp.65-72
• /
• 2011

In this paper, a real-time monocular vision based navigation system is developed for the disabled people, where online background learning and vector field histogram are used for identifying obstacles and recognizing avoidable paths. The proposed system is performed by three steps: obstacle classification, occupancy grid map generation and VFH-based path recommendation. Firstly, the obstacles are discriminated from images by subtracting with background model which is learned in real time. Thereafter, based on the classification results, an occupancy map sized at $32{\times}24$ is produced, each cell of which represents its own risk by 10 gray levels. Finally, the polar histogram is drawn from the occupancy map, then the sectors corresponding to the valley are chosen as safe paths. To assess the effectiveness of the proposed system, it was tested with a variety of obstacles at indoors and outdoors, then it showed the a'ccuracy of 88%. Moreover, it showed the superior performance when comparing with sensor based navigation systems, which proved the feasibility of the proposed system in using assistive devices of disabled people.

• The Journal of the Korea Contents Association
• /
• v.12 no.6
• /
• pp.142-150
• /
• 2012

The development of technology in traditional media is affecting a variety of ways. In particular, the influence of digital images, the animation turned to a realistic 3D animation. With the release of realistic 3D animation , Robert Zemeckis received much attention but the audience did not like the animation of this style gradually. Robert Zemeckis gave up 3D animation after that drew attention for having a huge production budget while failing at a record-setting proportion in the American box-office. A digital actor in realistic 3D animation looks like real but the audience know that it is not real and they know that realistic 3D animations and live-action movies are different. So the audience will experience an emotional conflict like confusion, hesitation. The visual completion in realistic 3D animation is due to the development of technology and technology must develop to connect the audience acceptance and movie.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.5
• /
• pp.35-44
• /
• 2007

Since the omnidirectional camera system with a very large field of view could take many information about environment scene from few images, various researches for calibration and 3D reconstruction using omnidirectional image have been presented actively. Most of line segments of man-made objects we projected to the contours by using the omnidirectional camera model. Therefore, the corresponding contours among images sequences would be useful for computing the camera transformations including rotation and translation. This paper presents a novel two step minimization method to estimate the extrinsic parameters of the camera from the corresponding contours. In the first step, coarse camera parameters are estimated by minimizing an angular error function between epipolar planes and back-projected vectors from each corresponding point. Then we can compute the final parameters minimizing a distance error of the projected contours and the actual contours. Simulation results on the synthetic and real images demonstrated that our algorithm can achieve precise contour matching and camera motion estimation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6A
• /
• pp.458-463
• /
• 2012

In this paper, we propose a direct depth map acquisition method for the convergence camera array as well as the parallel camera array. The conventional methods perform image rectification to reduce complexity and improve accuarcy. However, image rectification may lead to unwanted consequences for the convergence camera array. Thus, the proposed method excludes image rectification and directly extracts depth values using the epipolar constraint. In order to acquire a more accurate depth map, occlusion detection and handling processes are added. Reasonable depth values are assigned to the obtained occlusion region by the distance and color differences from neighboring pixels. Experimental results show that the proposed method has fewer limitations than the conventional methods and generates more accurate depth maps stably.

• Korean Chemical Engineering Research
• /
• v.45 no.1
• /
• pp.93-102
• /
• 2007

The objective of this study is to develop a 3D DMFC model for modeling gas evolution and flow patterns to design optimal flow field for gas management. The gas management on the anode side is an important issue in DMFC design and it greatly influences the performance of the fuel cell. The flow field is tightly related to gas management and distribution. Since experiment for the optimal design of various flow fields is difficult and expensive due to high bipolar plate cost, computational fluid dynamics (CFD) is implemented to solve the problem. A two-fluid model was developed for CFD based flow field design. The CFD analysis is used to visualize and to analyze the flow pattern and to reduce the number of experiments. Case studies of typical flow field designs such as serpentine, zigzag, parallel and semi-serpentine type illustrate applications of the model. This study presents simulation results of velocity, pressure, methanol mole fraction and gas content distribution. The suggested model is verified to be useful for the optimal flow field design.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.40-50
• /
• 2010

The studies of PMOS transistors in CMOS technologies are reviewed- focusing on the snapback and breakdown behavior of the parasitic PNP BJTs in high current regime. A new failure mechanism of PMOSFET devices under ESD conditions is also analyzed by investigating various I/O structures in a $0.13\;{\mu}m$ CMOS technology. Localized turn-on of the parasitic PNP transistor can be caused by localized charge injection from the adjacent diodes into the body of the PMOSFET, significantly degrading the ESD robustness of PMOSFETs. Based on 2-D device simulations the critical layout parameters affecting this problem are identified. Design guidelines for avoiding this new PMOSFET failure mode are also suggested.