• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.2
• /
• pp.186-194
• /
• 1986

In an attempt to find better ways to relate growth with temperature and to estimate maturity differences in corn (Zea mays L.), various formulas of computing Growing Degree Days (GDD) were evaluated. Utilizing data from 17 plantings of a single cross, Suweon 19, over a 3 year period, 24 different methods of computing GDD were compared for their ability to reduce variations over different plantings. The best equation was to compute GDD with a base temperature of 10$^{\circ}C$ and an optimum of 30$^{\circ}C$. The excess temperature above 30$^{\circ}C$ was subtracted to account for high temperature stress. GDDs required for emergence and silking of Suweon 19 were 64${\pm}$12$^{\circ}$ and 794${\pm}$19$^{\circ}$, respectively. Based on these GDD values, emergence and silking dates could be estimated with a variation less than 3 days. The observed and estimated number of days from planting to emergence and silking were not significantly different.

• Journal of Welding and Joining
• /
• v.6 no.4
• /
• pp.16-26
• /
• 1988

The effect of carbon content on hot cracking of welded carbon steel was investigated Eight steel plates whose carbon content range from 0.02 to 0.23 percent were welded by autogeous gas tungsten are process. Constant strain was applied to the hot crack test specimen under the strain rate of 0.15 mm per second during welding. The hot cracking susceptibility ws high in the rnage of 0.02-0.05 and 0.12-0.23 percent carbon contents. The critical carbon content immune to hot cracking is in the range from 0.07 to 0.12 percent carbon. By electron probe microanalyser, amanganese segregation was not seen significantly in the whole carbon range. But segregation of silicon was higher in the region of low carbon contents. However, sulphur was segregated remarkably in the region betwen 0.18 and 0.23 percent carbon by peritectic reaction. Very smal lamount of dnedritic structure was observed in the region from 0.02 to 0.05 percent carbon by peritectic reaction. Very small amount of dendritic structure was observed in the region from 0.02 to 0.05 percent carbon but the predominant solidification structure was smooth by cellular growth. The higher the carbon content is, the more the columnar dendritic structure was observed.

• Korean Journal of Materials Research
• /
• v.7 no.10
• /
• pp.919-925
• /
• 1997

초기 혼합분말을 다르게 사용함으로써 다른 반응경로를 따라 성장된 일방향 집합조직 YB $a_{2}$BaCu $O_{5}$(Y211)형상과 분포가 초기 혼합분말이 달라짐에 따라 상당히 다르게 형성되었다. 여러 반응경로 중에서 $Y_{2}$ $O_{3}$+Y123$\longrightarrow$ $Y_{1.6}$Ba/ sub 2.2/ $O_{y}$와 ( $Y_{2}$ $O_{3}$BaCu $O_{2}$)+Y123$\longrightarrow$ $Y_{1.6}$B $a_{2.3}$C $u_{3.3}$ $O_{y}$반응에 의하여 용융공정된 경우 일방향 집합조직 Y 123 결정 성장이 잘 일어났으며, 특히 Y123의 포정반응 온도 이하의 낮은 온도에서도 결정성장이 일어났다. 또한 Y211입자 미세화가 다른 반응에 의한 용융공정보다 잘 일어났다. 이와같은 서로 다른 반응과정에 의하여 용융공정된 미세구조의 차이점들을 $Y_{2}$ $O_{3}$-BaO-CuO 3원계 상평형도를 이용하여 설명하였다.다.다.다.다.다.다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.3
• /
• pp.171-178
• /
• 1981

The growth of Sebastes alutus was studied by scale reading to check the change of growth rate at the early stage of life. Lee's phenomenon was recognized on the scale measurements except thc first ring radius. No evidence was found to support the change of growth rate at early stage. Von Bert-alanffy's growth equation was estimated with the back-calculated fork lengths, $1_t=357.8(1-e^{-0.6124(t+1.8566)}),\;and\;W_{\infty}=784.4g$

• Journal of Korean Medical classics
• /
• v.18 no.3 s.30
• /
• pp.1-8
• /
• 2005

${\lceil}$소문(素問) 장기법시론(藏氣法時論)${\rfloor}$적오장병지일중간심적주석중(的五藏病的日中間甚的注釋中), 관어비병여폐병정적주석(關於脾病與肺病靜的注釋), 가분이하삼조(可分以下三條), 기일시(其一是), 비병정(脾病靜), 당작일중정(當作日中靜), 폐병정(肺病靜), 당작일질정, 기이시(其二是), 하포여야반(下哺與夜半), 제기적사(制其賊邪), 소이병정(所以病靜), 기삼시(其三是), 자어자기왕(資於子氣旺), 모기역왕(母氣亦旺). 논자이기지경향성해석본문(論者以氣之傾向性解釋本文), 기내용여하(其內容如下), 기일시(其一是), 평단여간유동양적기지경향성(平旦與肝有同樣的氣之傾向性), 소이병상(所以病爽). 하포여간유상반적기지경향성, 소이병심(所以病甚). 야반시보충간지기(夜半是補充肝之氣), 소이병정((所以病靜), 기이시(其二是), 일중여심(日中與心), 기기능유사(其機能有似), 소이병상(所以病爽). 야반여심(夜半與心), 유상반적기류(有相反的氣流), 소이병심((所以病甚). 평단보심적활동(平旦輔心的活動), 소이병정(所以病靜). 기삼시(其三是), 일질여비공유화적특성, 소이병상(所以病爽). 일출여화(日出與化), 유상반적기지특성(有相反的氣之特性), 소이병심((所以病甚). 하포시수렴적시기, 유관여화적작용(有關與化的作用), 소이병정(所以病靜). 기사시(其四是). 하포여폐, 공유수렴적특성(共有收斂的特性), 소이병상(所以病爽). 일중유상반적기류(日中有相反的氣流), 소이병심(所以病甚). 야반여금(夜半與金), 공유음적기류(共有陰的氣流), 소이병정(所以病靜). 기오시(其五是), 야반여신(夜半與 腎하), 공유장적기능(共有藏的 機能), 소이병상(所以病爽). 사계포용만물(四季包容萬物), 여장정미적신(與藏精微的腎), 유상반적특성(有相反的特性), 소이병심(所以病甚). 하포유수렴숙살기능, 보신지장적기능(補腎之藏的機能), 소이병정(所以病靜). 신병심적시기(腎病甚的時期), 작사계이불작일질, 저취설명료 신병적위중성(這就說明了 腎病的危重性).

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.1
• /
• pp.1-11
• /
• 1996

Mechanical alloying is an effective process to finely distribute inert dispersoids in an Al-TM(TM is a transition metal) system. It has been considered that high melting point aluminides are formed by precipitation from supersaturated Al(Ti) powder. This analysis is based on the fact that much higher content of TM than the solubioity can be dissolved in alpha aluminum during the high energy ball milling. Thus, decomposition behavior of Ti in the Al(Ti) was considered very important. But it is confirmed that the higher portion of Ti than Al(Ti) solid solution is existed as nano-sized Ti particles in the MA powders by high energy ball nilling from the XRD spectrum and TEM analysis in this study. Therefore, the role of undissolved TM particles affect the formation of aluminides should be suitably considered. In this study, we present experimental observation on the formation of $Al_3Ti$ fron mechanical alloyed Al-Ti alloys in the hyperperitectic region. This study showed that, in the mechanically alloyed Al-20wt%Ti specimen, intermediate phase of cubic $Al_3Ti$ and tetragonal $Al_{24}Ti_8$ formed at $300{\sim}400^{\circ}C$ and $400{\sim}500^{\circ}C$, respectively, before the MA state reaches to equilibrium at higher temperatures. The formation behavior of $Ll_2-Al_3Ti$ is interpreted by interdiffusion of Al and Ti in solid state based on the fact that large amount of nano-sized Ti particles exist in the milled powder. Present analysis indicated undissolved Ti particles of nanosize should have played an important role initiation the formation of $Al_3Ti$ phase during annealing.

• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.263-268
• /
• 1999

In this study, a new concept of aluminum-matrix composites and the possibility of in-situ processing are suggested, and preliminary results on AI- Ti system are presented. Fine powders of AI-lO% Ti were prepared by the gas atomization so that fine $Al_3Ti$ formed into flake shape. A 25v/o $Al_3Ti/Al$ composite sample was made by the pow­d er metallurgy process involving hot extrusion. Microstructure and mechanical behavior both at room temperature and high temperatures were analysed by OM, SEM, TEM and tension test. Microstructural characteristics and mechanical properties of the composites exhibited similar behavior to those of $SiC_w/2124$ composites. Merits and drawbacks of the $Al_3Ti/Al$ composites are discussed together with a possibility of further improvement.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.11a
• /
• pp.28-28
• /
• 2001

$Bi_2Te_3$계 열전반도체 재료는 200 ~ 400K 정도의 저온에서 에너지 변환 효율이 가장 높은 재료로서 열전냉각 및 발전재료로 제조볍 및 특성에 관한 많은 연구가 진행되어 왔다. 전자냉각 모듈의 제조에는 P형 및 N형 $Bi_2Te_3$계 단결정이 주로 사용되고 있으나. $Bi_2Te_3$ 단결정은 C축에 수직한 벽개면을 따라 균열이 쉽게 전파하기 때문에 소자 가공사 수윤 저하가 가장 큰 문제점으로 지적되고 있다. 이에 따라 최근 열전재료의 가공방법에 따른 회수율 증가 및 열전특성 향상에 관한 열간압출, 단조와 같은 연구가 활발히 이루어지고 있다. 본 연구는 가스분사법(gas atomizer)을 이용하여 용질원자 편석의 감소, 고용도의 증가,균일고용체 형성, 결정립미세화 둥 급속응고의 장점을 이용하여 화학적으로 균질한$Bi_2Te_3$계 열전재료 분말을 제조하고, 제조된 분발을 압출가공하여 기계적성질, 소자의 가공성 및 열전 성능 지수율 향상시키는데 연구 목적이 있다. 본 설험에서는 99.9%이상의 고순도 Bi. Te. Se. Sb를 이용하여, 고주파 유도로에서 Ar 분위기로 용융하고, 가스분사법를 이용하여 균질한 $Bi_2Te_3$계 열전재료 분만을 제조하였다. 분말표면의 산화막을 제거하기 위하여 수소분위기에서 환원처리를 행하였고, 된 분말을 Al 캔 주입하여 냉간성형 한 후 진공중에서 압출온도를 변화시켜 열간압출 가공을 행하였다. 압출 온도변화에 따른 압출재의 미세조직 및 열전특성에 중요한 영향을 미치는 C면 배향에 대한 결정방위 해석, 압출재의 압축강도 등을 분석하였으며, 압출온도에 따삼 미세조직 변화와 결정방위의 변화에 따른 열전특성의 관계를 해석하였다성시켰고 이들이 산인 HNO3에서 녹았기 때문이다. 본 연구에서 개발된 새로운 에칭 용액인 90H2O2 - 10HNO3 (vol%)의 에칭 원리가 똑같이 적용 가능한 다른 종류의 초경 합금에서도 사용이 가능할 것으로 판단된다.로 판단된다.멸과정은 다음과 같다. 출발물질인 123 분말이 211과 액상으로 분해될 때 산소가스가 배출되며, 이로 인해 액상에서 구형의 기공이 생성된다. 이들 중 일부는 액상으로 채워져 소멸되나, 나머지는 그대로 남는다. 특히, 시편 중앙에 서는 수십-수백 마이크론 크기의 커다란 기공이 다수 관찰된는데, 이는 기공의 합체로 만들어진 것이다. 포정반응 열처리 시 기공 소멸로 만들어진 액상포켓들은 주변 211 입자와 반응하여 123 영역으로 변한다. 이곳은 다른 지역과 비교하여 211 밀도 가 낮기 때문에, 미반응 액상이 남거나 211 밀도가 낮은 123 영역이 된다. 액상으로 채워지지 못한 구형의 기공들 중 다수가 123 결정 내로 포획되며, 그 형상은 액상/ 기공/고상 계면에너지에 의해 결정된다.단의 경우, 파단면이 매끄럽고 파변상의 결정립도 매우 미세하였으며, 산확물 의 용집도 찾아보기 어려웠 나, 접합부 파단의 경우에는 파변의 굴곡이 비교척 심하고 연성 입계파괴의 형태를 보였￡며, 결정립도 모채부 파단의 경우에 비해 조대하였다. 조대하였다. 셋째, 주상기간 중 총 에너지 유입률 지수와 $Dst_{min}$ 사이에 높은 상관관계가 확인되었다. 특히 환전류를 구성하는 주요 입자의 에너지 영역(75~l13keV)에서 가장 높은(0.80) 상관계수를 기록했다. 넷째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며 큰 자기폭풍일수록 현저했다. 주상에서 관측된 이러한 특성은 서브스톰 확장기 활동이 자기폭풍의

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.5
• /
• pp.230-238
• /
• 2023

Small and medium-sized food manufacturing enterprises are largely reliant on manual labor, from inputting raw materials to palletizing the final product. Recently, there has been a trend toward smartness and digitization through the implementation of robotics and sensor data technology. In this study, we examined the effectiveness of improvement through 3D simulation on two repetitive work processes within a food manufacturing company. These processes involve workers whose speed cannot match the capacity of the applied equipment. Two manual processes were selected: the weighing and packing process performed by workers after skewer assembly, and the manual batch process of counting randomly delivered frozen foods, packing (both internal and external), and palletizing. The production volume, utilization rate, and number of workers were chosen as verification indicators. As a result of the simulation for improving the 3D process, production increased by 13.5% and 56.8% compared to the existing process, respectively. This was particularly evident in the process of applying palletizing robots. In both processes, as the utilization rate and number of input workers decreased, robots could replace tasks with high worker fatigue, thereby reducing work overload. This study demonstrates the potential to visually compare the process flow improvement using 3D simulations and confirms the possibility of pre-validation for improvement.

• Applied Microscopy
• /
• v.38 no.4
• /
• pp.279-284
• /
• 2008

The phase change materials have been extensively used as an optical rewritable data storage media utilizing their phase change properties. Recently, the phase change materials have been spotlighted for the application of non-volatile memory device, such as the phase change random access memory. In this work, we have investigated the crystallization behavior and microstructure analysis of In-Sb-Te (IST) thin films deposited by RF magnetron sputtering. Transmission electron microscopy measurement was carried out after the annealing at $300^{\circ}C$, $350^{\circ}C$, $400^{\circ}C$ and $450^{\circ}C$ for 5 min. It was observed that InSb phases change into $In_3SbTe_2$ phases and InTe phases as the temperature increases. It was found that the thickness of thin films was decreased and the grain size was increased by the bright field transmission electron microscopy (BF TEM) images and the selected area electron diffraction (SAED) patterns. In a high resolution transmission electron microscopy (HRTEM) study, it shows that $350^{\circ}C$-annealed InSb phases have {111} facet because the surface energy of a {111} close-packed plane is the lowest in FCC crystals. When the film was heated up to $400^{\circ}C$, $In_3SbTe_2$ grains have coherent micro-twins with {111} mirror plane, and they are healed annealing at $450^{\circ}C$. From the HRTEM, InTe phase separation was occurred in this stage. It can be found that $In_3SbTe_2$ forms in the crystallization process as composition of the film near stoichiometric composition, while InTe phase separation may take place as the composition deviates from $In_3SbTe_2$.