• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.3
• /
• pp.33-41
• /
• 2021

This study identified the scale that traditional landscape design has taken up by analyzing a total of 1037 services for design of cultural heritage that had been ordered by the government agencies from 2018 to 2020, and has drawn characteristics of traditional landscape design focusing on major cases. The results are as follows. First, the number of order cases for traditional landscape design has shown differences annually in the services of design of cultural heritage, but the design amount has been found to have the similar average annually, which confirmed that the same level has been maintained each year. It was found that the number of cases of traditional landscape design requiring responsibilities or participations of landscape engineers for 3 years in the entire design had a high proportion of approximately 26%. Second, the traditional landscape design has required professional knowledge and experiences of landscape engineers that could not be replaced by the business operator for design of cultural heritage consisting of architects. The expertise has been shown differently depending on types of construction. First, the topographical design for the work to build a foundation has required understanding of ground shapes and its elevations and professional knowledge on calculation of the amount of the earth work and the remains maintenance technique etc. The plantation design has required basic knowledge on growth characteristics of trees and the environment for growth and understanding of the vegetation landscape of the past. Meanwhile, the design for traditional pavement and traditional landscape structures and facilities has required the expertise on traditional materials that are different from the modern ones and their processing and construction methods. The understanding of changes to water paths and ecosystem, the principles of fluids, and characteristics of each type of fluid was essential for the design for the ecological landscape work including the maintenance of a water system such as rivers etc. As such, the traditional landscape design has a scale accounting for approximately one fourth of the entire cultural heritage design and requires the expertise differentiated from other fields. This improves the provisions of the current law on limiting the actual design, suggesting the need for the establishment of a traditional landscape design company so that all traditional landscape designs can be carried out by landscape engineers.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.5
• /
• pp.336-340
• /
• 2004

The objective of this study was to establish the decision criteria of land suitability for red pepper using soil morphological and physical properties. The investigation was carried out in Jechen, Goesan, Euiseong, Andong, Gochang and Pyongchang district in Korea. The obtained results showed that factors related to the decision criteria of the land suitability for red pepper cultivation were soil texture, soil drainage class, land slope, available soil depth and stone content. The criteria of the best suitable soil for red pepper was coarse loamy, well drainage class, C-slope (7-15%), 10-20% gravel content and available soil depth deeper than 100 cm. Also in the best suitable soil, hardpan was located below 100 cm from the soil surface. Outbreak rate of phytophthora blight occurred well in the soils with high clay content, poor drainage class, low land slope and low gravel content. Database determining the decision criteria of the land suitability for red pepper in Jinchen-gun was established by Arc info GIS tool.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.58-58
• /
• 2011

CNT 나노기술을 응용한 IT산업용 적층간지용 ESD(정전방전, Electrostatic Dissipation)PU 발포필름의 제조 가공기술 및 상품화 개발은 전자제품 패키지에 요구되는 쿠션성과 정전방전 기능을 갖는 폴리우레탄 발포 필름의 제조기술을 확립함으로써 가능 할 수 있다. 특히 IT산업용 필름제품이 개발되면 ESD 성능을 발휘하게 됨으로서 정전기 쇼크에 의한 각종 전자제품의 오작동이나 파손 방지가 가능하게 되어 포장재, 자동차, 전자제품의 하우징 등으로 사용될 수 있게 된다. 현재까지 ESD 기능을 부여하기 위해서 사용되는 충전재로는 금속섬유, 금속플레이크, 탄소섬유, 카본블랙 등이 있으며, 최근 탄소나노튜브를 응용한 연구가 많이 진행되고 있는데 탄소나노튜브는 직경이 수십nm, 종횡비 1000이상의 나노섬유형태로 서 전기전도성이 구리수준으로 알려져 있고 소량을 충전할 시 기계적 특성도 오히려 증대하는 장점을 가지고 있으며 전기적 특성으로는 상대적으로 낮은 나노튜브 함량에서는 ESD를 들 수 있고 높은 함량에서는 전자파 차폐성까지 기대되고 있다. 본 연구에서는 우수한 인장강도, 기계적 강도, 열적 안정성, 내약품성을 가지면서 습식 또는 용융공정을 통해 용이하게 시트, 필름, 코팅제를 제조할 수 있는 방수, 투습방수성을 가지는 유연재료인 폴리우레탄(PU) 1액형 PU에 MWNT 함량이 3wt%인 IPA/MWNT 분산용액을 PU 함량 대비 20, 30, 40파트로 함유시켜 $120^{\circ}C$에서 2분 건조시켜 제조한 그라운드 필름에 2액형 PU와 IPA/MWNT 분산용액에 발포제를 첨가하여 발포온도 140, 150, $160^{\circ}C$에서 5분간 건조시켜 시료 필름을 제조하였다. 제조된 필름의 전기전도성 측정은 부피저항과, 표면저항을 각각 측정하여 확인하였으며, 필름의 마찰 대전압은 E.S.T-7 마찰 대전압 시험기를 이용하여 표면 마찰 대전압과 반감기를 측정하여 확인하고, 필름의 물리적 특성은 인장시험기를 이용하여 breaking stress, breaking strain을 구하였다. 필름의 표면 특성은 영상 현미경 시스템을 사용하여 ${\times}1000$ 배율로 측정하여 분산특성과의 연관성을 확인하였다.

• Journal of Plant Biotechnology
• /
• v.31 no.1
• /
• pp.7-11
• /
• 2004

This study was carried out to establish a new breeding scheme which is connected with conventional breeding method and anther culture method. To develop a herbicide resistant and direct seeding rice, $F_1$ plants were subjected to anther culture and regenerated plants from 5 crosses were studied to confirm the introduction of bar gene. After PCR analysis, we selected 227 plants which were carrying herbicide resistance gene (bar) out of 1,508 regenerated plants from anther culture. Among 169 $A_2$ lines carrying herbicide resistant gene from 5 crosses including YR23235 (Dongjin Ds3(Ba $r^{R}$)/ Milyang165), 42 lines that had superior agronomic characters were selected for further research. Among them, YR23235Acp79 which showed herbicide resistance, direct seeding adaptability and superiority in major agronomic characters was named Milyang 204. This breeding scheme proved that the anther culture of $F_1$ plants crossed between transformant and cultivar or transform ant alone could be utilized in breeding programs for a rapid progeny fixation and development of a variety.y.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.119.1-119
• /
• 2003

단체 급식의 증가와 더불어 편의식품을 선호하는 소비 경향에 맞추어 최소가공한 과일의 갈변저해를 위한 저해제를 탐색하였다. 실험에 사용한 과일은 배와 감으로 각각 박피하여 속심을 제거한 후 배는 8조각으로 절단하고 감은 1~2cm 두께로 slice 하였다. 저해제는 1% ascorbic acid, citric acid, NaCl, MgCl$_2$, CaCl$_2$, oxalic acid, EDTA, raffinose, salicylic acit, sporix를 사용하였다. 또한 열수 추출한 오약, 계피, 황기, 당기, 건칡, 진피, 천궁, 감초 등도 저해제로 사용하였다. 최소가공한 과일은 저해제에 3분간 침지한 후 물기를 제거하고 tray에 포장하여 실온에서 저장하면서 colorimeter를 이용하여 갈변도의 변화를 측정하였다. 갈변 정도를 나타내는 $\Delta$E 는 시간의 경과에 따라 점차 감소하는 경향을 보였으나 배의 경우 변화 정도가 크지 않았다. NaCl, MgCl$_2$, CaCl$_2$를 처리한 배의 갈변 정도가 가장 적었다. cysteine을 처리한 구에서는 황화합물 냄새가 났다. 또한 oxalic acid를 처리한 구에서는 연화가 빠르게 일어났으며 저장 시간이 경과함에 따라 수분이 용출되었다. 한약재는 자체 색으로 인해 배의 색변화를 증가시켰으며 이취가 발생했다. 또한 저장 시간이 경과함에 따라 건조가 빠르게 일어나 관능적으로도 좋지 않은 결과를 나타냈다. 감에서는 CaCl$_2$, MgCl$_2$를 처리한 구에서 색의 변화가 가장 적었으며 cysteine은 색변화는 적었으나 배의 경우과 같이 이취가 발생하였다. 한약제는 계피와 진피를 처리한 감에서 색의 변화를 저해하는 효과를 보였다.를 처리하였을 경우 당귀, 천문동을 처리한 구에서 효과를 보였다. oxalic acid는 갈변저해에는 효과적이었으나 시간이 경과함에 따라 수분의 용출이 증가하였으며 물성의 변화도 컸다. 또한 ZnCl$_2$를 처리한 구에서는 이취 발생과 수분 용출이 컸으며 색의 변화도 컸다.내었다. 고온 단시간 처리구의 경우 저온 장시간 처리구와는 달리 저장 1일 후부터 그 농도가 다소 상승되었다가 다시 감소는 경향을 보였다. 한편 열처리하여 냉각시킨 직후 및 저장1주 후 사과의 pH, 산도, 당도, 경도, 과육의 갈변도 등을 조사하였던 바 대조구 및 처리구간에 일부 항목에 있어서는 약간의 차이를 나타내었다. 대치할 수 있을 것이라고 사료된다. 수분함량은 기계적 검사보다 관능검사와 더욱 높은 상관관계를 나타냈다.내었다. 항균활성이 우수한 생약재를 농도별로 활성을 조사한 결과, 물 추출물과 10% Ethanol 추출물 모두 낮은 농도에서도 우수한 항균활성을 나타내었다.취와 함께 점질성 갈변물질이 생성되었다. 이와 같은 결과로 볼 때, BAAG의 처리는 BAAC의 경우보다 가격은 저렴하면서도 항균력은 우수한 천연 항균복합제재로써 농산물 식품원료에 적용하여 선도유지 기간을 연장할 수 있는 효과를 기대할 수 있었다. 과일 등의 포장제로서 이용할 가능성을 확인하였다.로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X^{0}$ elements)로 가정한다. 즉, [+wh] 의미의 겹의문사는 동일한 구성요 소를 지닌 병렬적 합성어([$[W1]_{XO-}$ $[W1]_{XO}$ ]

• Journal of the Korean Geotechnical Society
• /
• v.21 no.6
• /
• pp.67-79
• /
• 2005

The field plate load test has a good potential for determining modulus since it measures both plate pressure and settlement. Conventionally the modulus has been assumed to be a constant secant value defined from the settlement of the plate at a given load intensity. A constant modulus (modulus of subgrade reaction, k), however, may not be a representative value of subgrade soil under working load. Field strain(o. stress)-dependent modulus characteristics of subgrade soils, at relatively low to intermediate strains, are important in the pavement design. In this study, the field strain dependent moduli of subgrade soils were obtained using cyclic plate load test. Testing procedure and data reduction method are proposed. The field crosshole and laboratory resonant column tests were also performed to determine field nonlinear modulus at $0.001\%\;to\;0.1\%$ strains, and the modulus values and nonlinear trends are compared to those obtained by cyclic plate load tests. Both modulus values match relatively well when the different state of stress between two tests was considered, and the applicability of field cyclic plate load test for determining nonlinear modulus values of subgrade soils is verified.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.6
• /
• pp.1095-1101
• /
• 2001

Spinach was minimally processed into the unseasoned side dish to be used for Korean food service industry, using the techniques of cook-chill and sous vide. Spinach was blanched at 10$0^{\circ}C$ for 6 minutes, vacuum-packaged in the unit of 500 g by plastic film of low gas permeability, pasteurized at 9$0^{\circ}C$ and then cooled rapidly at 3$^{\circ}C$. The chilled products were then stored at 3 and 1$0^{\circ}C$ with measurement in their quality. Six log cycle (6D) inactivation of Listeria monocytogenes and 13 log (13D) thermal destruction of Streptococcus faecalis were compared as two pasteurization conditions, which corresponded to heating for 22.8 and 30.0 minutes at 9$0^{\circ}C$, respectively. Milder heat processing based on 6D process of L monocytogenes gave better quality of color, texture, ascorbic acid and chlorophyll than the conditions of 13D process of S. faecalis. Any microbial growth in total aerobic, psychrophilic and anaerobic bacteria was not observed until 8 days at 1$0^{\circ}C$ and 14 days at 3$^{\circ}C$, which might be regarded as strict guidelines of shelf life. Storage times based on the changes in physical and chemical quality were longer than those based on strict microbial quality in case of the products pasteurized by 6D process of L. monocytogenes. The seasoned vegetables prepared from sous vide processed spinach were found to be inferior in sensory quality to those from freshly blanched one.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.1
• /
• pp.27-33
• /
• 2023

An optimized design of the transportation insulated box must be considered to control the thermal damage in order to maintain the fresh condition for temperature-sensitive medicine and frozen food safety. The inside temperature of the insulated box is a natural convection enclosure state, thermal stratification naturally occurs as time passes in case of with outside heat load. The latent heat material (LHM) placement inside the box maintains the target temperature of the product for temperature fluctuations during transport, and LHM application is a common and efficient method. In this work, inside temperature stratification in an insulated box depending on the LHM pack position is numerically simulated and experimented. The insulated box is made up of vacuum insulation panel (VIP), and LHM modules are placed over six faces inside the box, with the same weight. The temperature curves for 72 hrs as experiment results clearly show the temperature stratification in the upper, middle, and lower at the LHM melting time region. However, the temperature stratification state is uniformly changed in accordance with the condition of the upper and lower placement weight of the LHM pack. And also, the temperature uniformity by changed placement weight of LHM has an effect on maintaining time for target air temperature inside the box. These results provide information on the optimized design of the insulated box with LHM.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.1
• /
• pp.51-57
• /
• 2023

Because of the global pollution caused by plastic disposal, demand for eco-friendly transformation in the packaging industry is increased. As part of that, the utilization of polylactic acid (PLA) as a food packaging material is increased. However, it is necessary to improve the crystallinity of PLA by adding nucleating agents or to improve the modulus by adding fillers because of the excessive brittleness of the PLA matrix. Thus, the cellulose nanofiber (CNF) was fabricated and dried to obtain a powder form and applied to the CNF/PLA nanocomposite. The effect of CNF on the morphological, thermal, rheological, and dynamic mechanical properties of the composite was analyzed. We can confirm the impregnated CNF particle in the PLA matrix through the field emission scanning electron microscope (FE-SEM). Differential scanning calorimetry (DSC) analysis showed that the crystallinity of not annealed CNF/PLA nanocomposite was increased approximately 2 and 4 times in the 1st and 2nd cycle, respectively, with the shift to lower temperature of cold crystallization temperature (T_cc) in the 2nd cycle. Moreover, the crystallinity of annealed CNF/PLA nanocomposite increased by 13.4%, and shifted T_cc was confirmed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.2
• /
• pp.128-134
• /
• 2024

Asphalt-based waterproofing materials for bridge decks face issues such as softening or liquefaction of the material during the process of pouring hot asphalt concrete on top of the waterproofing layer. This leads to instability and reduced thickness of the waterproofing layer. To address these problems, new solutions beyond the existing materials, including the development and adoption of new materials, are required. Therefore, this study investigates the properties of MMA(Methyl Methacrylate) coating waterproofing material, which meets the basic physical properties for bridge deck waterproofing. We examined the overall quality standards in a system where the substrate concrete, waterproofing material, and paving layer are integrated. The study confirmed the applicability of MMA coating waterproofing material on bridge decks. The results indicate that a stable application of MMA coating waterproofing material for civil engineering structures' bridge decks can be achieved with a mix ratio of hard MMA resin : soft MMA resin : powder = 6 : 34 : 60. Additionally, when using emulsified asphalt with hardening characteristics for the adhesion between the dissimilar materials of MMA waterproofing and asphalt concrete, it is expected to meet the minimum quality standards of the Ministry of Land, Infrastructure, and Transport's 'Guidelines for Asphalt Concrete Pavement Construction (2021.07)'.