• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.2
• /
• pp.183-188
• /
• 1996

The compressive stress-strain response of Low Density Polyurethane foam material is modeled using the finite element method. A constitutive equation which include experimental constants based on quasi-static and dynamic uniaxial compression test is proposed. Impact test with different impactor masses and velocities are performed to verify the proposed model. The comparison between impact test and finite element analysis shows good agreements.

• Journal of the korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.67-87
• /
• 1996

본 연구에서는 차체의 충돌해석 및 모델링을 위하여 판/쉘 요소의 자동생성 모듈을 개발하고 재료의 변형특성 모델링 모듈 및 접촉처리 모듈을 개발하였다. 충돌해석용 전처리기능으로는 평면, 실린더 곡면, B-스플라인 곡면 및 블렌딩 (blending) 곡면상에서의 사각형 요소망 자동생성 기법과 프로그램을 개발하였다. 또한 차체를 구성하고 있는 여러가지 재료들의 변형거동을 모델링하여 개발중인 충돌해석전용프로그램인 Autocrash의 모듈로서 완성하였다. 이들은 변형률속도의 영향이 고려된 탄소성 재료, 강체 재료, 포옴 재료 및 이방성 재료등으로 정면충돌 해석 및 측면충돌 해석에 필요하다. 한편 접촉처리 모듈에서 접촉탐색법으로는 주종탐색법과 HITA 알고리즘을 병행하여 사용할 수 있도록 프로그래밍하였으며, 불침투 조건의 처리는 벌칙함 수법을 이용하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.94-98
• /
• 1992

낮은 점도를 갖는 단위체(monomer)나 반응성이 있는 올리고머(oligomer)를 이용한 생산속도가빠른 반응사출성형(reaction injection molding)은 일반적인 열가소성 고분자 재료의 사출성형(thermoplastic modding)에 비하여 기계 설비비용을 상당 히 감소시킬 수 있는 장점을 갖으며, 매우 크고 복잡한 형태의 제품을 가공하기가 용이하고, 특히짧은 가공주기(cycle time) 에 부합하는 금형 내에서의 빠른 종합반응이 특징이다. 본 연구는 반응사출성형용 폴리우레탄을 이용한 미세포 포옴의 가공 시 초음파 가진의 영향에대한 이론적 해석과 반응사출 성형을 모사할 수 있는 실험장치에의해 가공되어지는 시편의 파단면을 전자주사현미경에 의해 관찰함으로써 기포의 크기를 조절할 수 있는 가능성에 대한 고찰이 목적이다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.5
• /
• pp.44-54
• /
• 2003

The experiments are performed to evaluate mechanical properties about foam and face materials of sandwich beams. These results are applied to the flexural wrinkling estimation of sandwich beam. The 3 point bending test shows that it is reasonable to include pre-buckling behavior in flexural wrinkling analysis, which is closer to experimental result. It is also conducted to survey the wrinkling behavior.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.332-340
• /
• 2009

In this study, the thermal insulation effectiveness of the greenhouse insulators by the installation methods was investigated to find the right installation way of the insulation materials. Physical properties of the insulators such as thickness, air transmissivity, apparent density, ultraviolet rays cutoff ratio, reflectance, thermal conductivity, moisture absorptivity were evaluated and the insulation ability of the insulators were measured by the module experiments. For the same insulator, the insulation ability of the case with the outward direction of the black colored face, i.e., with the inward direction of the white colored face, was better than that of vice versa. The case of the black colored both surfaces was better than the case of the white colored both surfaces. For aluminium reflection material, the case with the outward direction of the lustre face, i.e., with the inward direction of the non-lustre face, was better than that of vice versa. For the same material with the inner thin polyethylene foam (or polyester) and the chemical wool, the case with the outward direction of the inner thin polyethylene foam (or polyester), i.e., with the inward chemical wool, was better than that of vice versa. Addition of the inner thin polyethylene foam increased the insulation effect very much.

• Composites Research
• /
• v.14 no.6
• /
• pp.1-8
• /
• 2001

In this paper, the sandwich panel composites consisting of core material and face sheet were studied to evaluate the mechanical properties, noise level and fire resistance including flammability, smoke, and toxicity. Four types of sandwich panel were prepared using various kinds of panel and honeycomb materials. It was observed that Al honeycomb/Al skin composite materials had the excellent flatwise tensile strength and edgewise compressive strength compared with other types of composites. The flatwise compressive strength and flexural strength of Nomex honeycomb/Al skin composite were higher than those of other composites. PMI form/Al skin composite showed the higher core shear strength and facing bending strength. From the experimental results of flame resistance tests, it can be said that the phenol based skin composite has the excellent flame retardation properties, which are similar to those of the commercial skin composites.