• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.108-109
• /
• 2003

적응광학(Adaptive optics, AO)계에서 왜곡된 파면을 폐회로 보정하기 위해서는 파면측정 장치와 파면보정 장치인 변형거울의 상관관계를 찾고 보정신호를 제어해주는 알고리즘이 필요하다. 일반적으로 적응광학계를 제어하는 방법을 지역(Zonal)제어와 모드(Modal)제어로 나눌 수 있다. 지역제어는 파면을 영역별로 나누어 파면보정 장치의 각 구동소자 위치에 대응하는 신호를 발생하여 제어하는 방법이고, 모드제어는 파면의 정보를 Zernike 다항식과 같은 일정한 기저함수들의 선형 합으로 표현한 뒤 각 모드에 해당하는 제어신호를 발생하여 전체 파면을 제어하는 방법이다. (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.120.1-120.1
• /
• 2013

우주 궤도환경은 $10^{-5}$ torr 이하의 고진공 및 $100^{\circ}C$의 고온과 $150^{\circ}C$이하의 극저온 환경으로 특징지어지며, 위성체 및 위성체 부품은 이와 같은 우주 궤도환경에서의 성능검증이 필수적이다. 지상에서 이와 같은 환경을 모사하기 위해서는 열진공챔버가 사용되며, 열진공 챔버는 진공배기계와 열제어 시스템으로 구성된다. 특히 위성체 또는 위성부품의 열환경을 모사하기 위해 기체 질소를 이용한 폐회로 열제어 시스템이 사용된다. 폐회로 열제어 시스템은 슈라우드, 극저온 블로워, 히터 등으로 구성이 된다. 열제어 시스템의 신뢰성을 높이기 위해서는 핵심 부품인 극저온 블로워의 이중화가 필요하다. 본 논문에서는 위성체 및 위성체 부품의 열진공 시험에 사용되는 열진공 챔버 열제어 시스템의 핵심인 극저온 블로워의 이중화를 위한 기구 설계 및 제어로직 설계 등이 포함되어 있다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.140-143
• /
• 2000

Motion control system using motor generally consists of 2 inertio system, motor inertio and load inertio linked with flexible coupling. In the case of direct drive motor control, the effect of coupling inertio decrease the precision performance. The study is about semiclosed control scheme of the system and experimental setup. To compensate the effect of coupling inertio, semiclosed control system by disturbance observer is employed. The simulation result is shown.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1089-1098
• /
• 1992

This paper concerns a discrete time control of noncolocated flexible mechanical systems by using time delay relation. A stability criterion of closed-loop system is derived in discrete time domain and a graphic method is developed for designing controllers. Based on this method, a derivative controller is designed for a simply supported uniform beam in the cases of colocation without time delay and of noncolocation with time delay. Some simulation results show the effectiveness of the suggested control.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.6
• /
• pp.94-101
• /
• 1994

About vibration model of Six-degrees-of-freedom(DOF), in mass load, examined results for knowing dynamic interference and response variation is as follows; In case of putting mass load upon the object, experimented results on two-degrees-of-freedom of the translation-1 direction and the rotation-1 direction at open-loop-control system, about 0.19 arcsed in input of the translation-$0.1{\mu}m$ and $0.022{\mu}m$ on input of the rotation-0.5 arcsec, the justicse of motion equation is acknowledged as confirming the appearance of the interference-$0.022{\mu}m$. In establishing calculation of transformation matrix by using analogue circuit, as simulating results that used incomplete differentiation, interference is $1.7{\times}10^{-3}$ arcsec on input of the translation-$0.1{\mu}m$ and $1.4{\times}10^{4}{\mu}m$ on input of the rotation-0.5 arcsec in open-loop-control system. Also it is $4.2{\times}10^{-4}$ arcsec on input of the translation-$0.1{\mu}m$ and $5.6{\times}10^{-5}{\mu}m$ on input of the rotation-0.5 arcesc in closed-loop-control system. As closed-loop-control system is better than open-loop-control system, equivalent accordance is confirmed on original response. Finally, fundamental validity of this theory is acknowledged.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.726-733
• /
• 2017

A magnetic shutter gear is a device that transfers mechanical power by synchronizing the magnetic field between permanent magnet layers facing circumferentially through a harmonic modulator. However, magnetic gears uses many rare-earth permanent magnets to guarantee comparable torque density to that of mechanical reducer. Hence, we propose a novel axial magnetic gear with a dramatically reduced number of permanent magnets and a closed magnetic path. The torque of the system was compared to that of an existing shutter gear through a harmonic analysis of the air-gap magnetic field. The modulator thickness and open ratio were considered as the primary design parameters, and the cogging effect was analyzed for variation of the reduction ratio. A dynamic model between the high-speed side and low-speed side was derived, and position control was performed for a constructed hardware implementation.