• 한국축산시설환경학회지
• /
• 제20권2호
• /
• pp.69-76
• /
• 2014

This study was aimed at investigating a filtration bed system for the production of liquid fertilizer using wastewater generated after anaerobic digestion of animal manure. Slurry, Compost, & Biofiltration-Methane System, designed by Korean National Institute of Animal Science, is now a standard method to recycle anaerobic digestion wastewater. However, currently provided protocol to run the system needs continuous upgrades as the system is relatively new and can be more cost-effective if few adjustments are made. In this study, we tried to enhance the capability of the system to process anaerobic digestion wastewater by replacing the bed materials with the cheaper one, and determining the time point of operation from which filtrates can be utilized for fertilization.

• 청정기술
• /
• 제13권3호
• /
• pp.188-194
• /
• 2007

급속한 성장에 따른 디스플레이 산업에서의 생산량 증가는 원료 사용의 증가와 배출액의 증가를 야기하고 있으며 이에 따른 폐액 처리양이 증가되어 환경적, 경제적 문제점을 안고 있다. 본 연구에서는 브라운관 소재인 shadow mask의 식각공정 시 사용한 식각용액의 피로도를 감수시키기 위하여 산화반응을 이용하여 신액 사용량과 구액 배출량을 최소화해주는 GRS(Green Recycling System)공정의 수율을 향상시키기 위해 실험실 및 현장적용 실험을 통하여 공정의 최적화를 하기위한 방법을 연구하였다. 공정변수들과 GRS 공정의 수율과의 관계를 규명하였으며 GRS 반응기의 내부구조 개선으로 인해 약 10%의 수율증가를 확인하였으며 공정의 수율 향상과 최적화에 큰 도움이 되었다.

• 한국물환경학회지
• /
• 제22권1호
• /
• pp.122-127
• /
• 2006

Fundamental studies were carried out for an effective removal and recovery of silver from waste photo-developing solution by solvent extraction. The organic solvents examined for silver-extraction were ALIQUAT 336, D2EHPA, KELEX 100, and TBP. ALIQUAT 336, which is an anionic exchanger, was found to be efficient for the extraction of silver and the reason for this was considered to be due to the chloride ion contained in its structure. The extent of silver extraction was examined to increase with the concentration of ALIQUAT 336 until it reached 0.6 M and no more extraction was observed above this concentration. The extraction of silver by ALIQUAT 336 was found to reach its pseudo-equilibrium within a few minutes after the reaction started and additional slight increase in silver extraction was observed until 30 minutes of reaction time. The observed differences in silver extraction for artificial and actual waste solutions were considered to be based upon the different ionic form of silver-containing species in these solutions.

• 기술사
• /
• 제14권1호
• /
• pp.22-29
• /
• 1981

This study concernes the decomposition of cyanide ion in electroplating plant wastewater and COD variation of photodeveloping wastewater under various conditions. Determinations of CN- concentration were carried out by AgNO$_3$ titration method. The sample solutions were pretreated by passing ozone and decompositions were checked as a function of time for ozone treatment. Analysis of film developing wastewater was carried out by KMnO$_4$ method. Electroplating plant wastewater was also examined at various pH; decomposition rate of cyanide ion was found to increase at higher pH. Time required for the decomposition could be shortened by removing the heavy metal ions under alkaline condition. The effect of temperature on decomposition was studied at 40$^{\circ}$ and 60$^{\circ}C$. The result was better at 40$^{\circ}C$ although time for decomposition was almost same at both temperatures. Analysis of film developing wastewater revealed that COD decrease was faster during the first 1 to 2 hours. However, further decrease could not be effected. The existence of unknown special organics resistant to the decomposition was believed to be the reason.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.106-107
• /
• 2008

과거 PCB 제조 공정의 주된 관심사는 한정된 시간안에 다량의 제품을 생산하기 위한 것에 초점이 맞추어져 있었으나, 최근 중국의 전자산업 시장진출에 따른 PCB 가격 하락 및 원자제 가격 상승으로 인하여 생산 단가를 낮출 수 있는 방법으로 시선을 돌리고 있다. 특히, PCB 제조 공정에서, 생산 가격을 낮출 수 있는 방법중 가장 큰 비중을 차지하고 있는 것은, 습식 에칭 시 사용되는 용액(에칭액)의 사용 양을 제어함으로써, 화학 약품의 구입에 따른 비용 및 사용된 약품을 처리하는 비용을 줄일 수 있는 방법을 찾으려 노력하고 있다. 그러나, 애칭액을 효율적으로 제어하기 위해서는 여러 센서에서 나오는 데이터를 통합하여 진단할 수 있는 시스템이 필요하다. 그러나, 센서에 의한 데이터가 다양함에 제어 알고리듬이 복잡함에 따라 효율적인 제어 시스템이 개발되기 힘들다는 문제점이 있다. 본 논문에서는 이점에 착안하여, 인공지능 알고리듬을 이용한 애칭액 신액 투입조건을 실시간으로 제어 할 수 있는 시스템을 제안한다. 제안된 시스템을 사용하여, 애칭액을 균일하게 유지함에 따라 애칭액의 사용량을 줄일 수 있을 뿐 아니라, 폐액을 일정하게 관리할 수 있음을 확인하였다.

• KSBB Journal
• /
• 제27권1호
• /
• pp.51-56
• /
• 2012

This research was to investigate the polyester preparation using waste ethylene glycol (EG) generated from the wastepaper pretreatment process. Waste EG was obtained from using EG five times repeatedly in the pretreatment of wastepaper. The hydroxyl value of the waste EG was 441 mg KOH/g and its composition was 0.68% cellulose, 6.5% hemicellulose, 6.1% lignin, and 86.7% EG. Maleic acid was used as carboxylic acid. The effect of reaction temperature and time except carboxyl group/hydroxyl group ratio on the crosslinkage of the prepared polyester was marginal. Citric acid, lithium hydroxide and dicumyl peroxide were used as additive or catalyst to enhance the crosslinkage of polyester. Among them, 10% of citric acid was found to be most effective. The crosslinkage was 86% when the polyester was prepared at an optimum condition such as $130^{\circ}C$ and 15 minutes, 1.5 of C/H ratio, and 10% of citric acid, and its insoluble percentage in boiling water for 6 hours was 47%. The weight loss of the prepared polyester was approximately 40% when it was buried in damp soil for 5 months, indicating that it is readily biodegradable. This results can provide some information for future development of wastepaper pretreatment by organic solvent.

• 한국분말재료학회지
• /
• 제10권4호
• /
• pp.262-269
• /
• 2003

Nano-sized Ni-ferrite powder was fabricated by spray pyrolysis process using the waste solution resulting from shadow mask processing. The average particle size of the powder was below 100 nm. The effects of the concentration of raw material solution, the nozzle tip size and air pressure on the properties of powder were studied. As the concentration increased, the average particle size of the powder gradually increased and its specific surface area decreased, but size distribution was much wider and the fraction of the Ni-ferrite phase greatly increased as the concentration increasing. As the nozzle tip size increased from 1 mm to 2 mm, the average particle size of the powder decreased. In case of 3 mm nozzle tip size, the average particle size of the powder increased slightly. On the other hand, in case of 5 mm nozzle tip size, average particle size of the powder decreased. Size distribution of the powder was unhomogeneous, and the fraction of the Ni-ferrite phase decreased as the nozzle tip size increasing. As air pressure increased up to 1 kg/$cm^2$, the average particle size of the powder decreased slightly, on the other hand, the fraction of the Ni-ferrite phase was almost constant. In case of 3kg/$cm^2$ air pressure, average particle size of the powder and the fraction of the Ni-ferrite phase remarkably decreased, but size distribution was narrow.

• Nuclear Engineering and Technology
• /
• 제27권4호
• /
• pp.603-618
• /
• 1995

원자력 발전소 및 동위원소 사용기관에서 발생되는 가연성 고체 폐기물 및 유기폐액의 소각기술의 활용에 있어서 이의 안전성 확보를 위한 기술적 기준의 설정을 위한 고려인자들을 조사하였다. 국내외의 소각기술 활용현황을 알아보았고 본 기술의 국내 도입시 필요한 기술적 안전지침에 관한 외국의 사례를 조사하고 국내 관련 규정도 검토, 비교, 분석하여 주요 고려항목을 도출하였다. 안전성 확보를 위한 고려 항목을 크게 일반산업시설 적용항목, 원자력시설 상 안전조건, 소각시설의 기술적 요구사항, 기타 제반사항으로 나누어 제시할 수 있었다. 이들 내용은 기존 원자력 및 환경시설에 적용되는 안전성분석보고서 및 환경영향평가서로 작성될 수 있다고 보았으며 시설의 개요, 시설의 기술적 사항과 이에 따르는 안전을 위한 조건, 폐기물의 인수조건 등이 포함되며 기존 관련 법규의 적용 및 확인이 필요하였다. 기술적 사항에는 공정의 제염계수, 연소효율, 소각재의 형상, 배기가스의 방출농도, 작업자 및 인근주민의 피폭등이 확인되어야 하며 소각재의 처리방법 및 조건이 제시되어야 하고 소각재의 침출특성 등이 주요한 인자라고 보았다. 아울러 소각대상폐기물의 인수조건이 명시되어 소각성능에 따른 이의 안전성이 입증되어야 한다. 따라서 인허가 후 건설된 시설에서의 사용전 시험소각절차의 제시 및 이에 대한 관련 규제기관의 검사제도가 있어야 하며 품질보증절차 역시 관련지침에 따라 실시되어야 한다. 이와 같은 내용을 포함하는 안전기술지침의 설정이 절대적으로 필요하며 본 연구조사 결과의 활용이 기대된다.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.54-60
• /
• 1994

The pine bark from mechanical pulp industry was cooked with bisulfite liquor, and the chemical and physical properties of the spent liquor after cooking for 90 minutes, which allowed partial defibration were determined. Lignosulfonate or lignin-related materials in the spent liquor have a molecular weight of approximately 3,000, which is lower than that of commercial lignosulfonate (C-LS) prepared from wood. The sulfonic equivalent weight calculated by colloid titration was 307 for C-LS, 238~239 for spent liquor. The contents of lignosulfonic acid and phenolic hydroxyl groups on $C_9$ unit of lignin in the spent liquor were 0.98~0.99, and 1.51~1.66, respectively. These values were remarkably higher than those of C-LS. Especially the content of phenolic hydroxyl group was almost twice that of C-LS. The viscosity of spent liquor after freeze drying was very low compared to C-LS. The dispersing ability of spent liquor was almost equivalent to or more than that of C-LS.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.19-24
• /
• 1994

This study was performed to study utilization of separated carbohydrates as well as separation, following analysis of the major components and separation of the carbohydrates in waste liquors of SP, KP, ASAM and AS. The result can be summerized as follows; Inorganic contents in waste liquors increase in this order AS