• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.4
• /
• pp.247-254
• /
• 1994

This study was conducted to characterize the chemical and mineralogical properties of representative phosphate rocks from North Carolina and Florida, and to find out the method for increasing the citric acid (two percent) solublility of phosphate rock. The the results are summerized as follows : 1. Major composition of phosphate rock was carbonate apatite containing small amounts of calcite and quartz. The differential thermal analysis(DTA) did not show endothermic or exothermic peak till $1,000^{\circ}C$. 2. Two percent citric acid solublility of phosphate rock was increased with the finess of particle size, but the water solublility was not affected by the particle size. Long time calcinated under high temperature had negative effect, while the incubation with 2% citric acid under low temperature had positive effect on solubility. 3. To increase the solubility of phosphate rock it was mixed with farmyard and barnyard manure and acidulated. Citrate solubility by treatment with sulfuric acid was more effective than nitric acid. Acidulation with thirty percent sulfuric acid increased both citric acid solubility and water solublility. Treatment with glutamic acid had little effect on the solubility of phosphate rock.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.1
• /
• pp.1-11
• /
• 1987

A kraft black liquor obtained from pulping of pine (Pinus densiflora Sieb et Zucc) was used for producing three kinds of adhesive such as black liquor-phenol formaldehyde resin, methyloeated kraft lignin-phenol formaldehyde resin, and lignin cake-phenol resin. In case of producing black liquor-phenol formaldehyde resin, about 60 percent of the phenolic resin could be replaced by black liquor. Also the optimal press condition appeared to be $160^{\circ}C$ for 7 min. (l5.77Kg/$cm^2$ in dry test, 8.54Kg/$cm^2$ in 4 hr. boil test). Phenol could be substituted up to 80-90 percent by methylolated kraft lignin. The suitable conditions of factors affecting bond quality were pH to 2.6, methanol as solvent and 0.2ml formaldehyde per 1g of the adhesives, respectively. The optimal press condition was $150^{\circ}C$ for 4 min. (188.54Kg/$cm^2$ in dry test, 10.08Kg/$cm^2$ in 4 hr. boil test). In preparing lignin cake-phenol resin, a suitable mixing ratio of phenol to powered kraft lignin was one to one by weight. The optimal press condition was $150^{\circ}C$ for 4 min.(18.46Kg/$cm^2$ in dry test, 12.31Kg/$cm^2$ in 4 hr. hoil test).

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.635-641
• /
• 2014

Archaeological waterlogged woods require a process of dimensional stabilization for their conservation. PEG is the most widely used in the conservation of archaeological waterlogged wood. One of the easiest and commonly used methods is the impregnation of 40% polyethylene glycol followed by vacuum freeze drying. However, the waste fluid produced from the PEG treatment is black in color and has a severe odor due to the organic matter extracted from the wood. Thus It cannot be recycled and it was just thrown out. Color of waste fluid can be decolored with oxidation reaction by hydrogen peroxide. Properties of PEG before and after preservation treatment, and after oxidation with $H_2O_2$ were not changed. Dimensional stability of archaeological waterlogged Salix koreensis Andersson was studied with pure or recycled PEG. The ratio of impregnation solutions were 10:0, 7:3, 5:5, 3:7, 0:10 (pure PEG : recycled PEG). Impregnation process was carried out by putting the wood specimens 10% PEG solution for 5days, 20% for 5 days, 30% for 5 days finally 40% for 5 days. All of the specimens showed the weight change rate of 25%. SEM results provided that the dimensional change of were less than 4% PEG impregnated specimens. Comparing with pure PEG impregnation system, conservation precess mixed PEG also showed no significant changes. Conclusively, the recycled PEG can be used for archeological waterlogged wood conservation precess.

• The Korean Journal of Pesticide Science
• /
• v.7 no.3
• /
• pp.169-175
• /
• 2003

For safe and easy disposal of prochloraz wastewaters after used as rice seed disinfectant in Korean farms, this experiment was carried out. By addition of several agricultural materials commonly utilizing in farmers, removal effect of prochloraz from waste solution was also investigated. When rice seeds after soaking in diluted prochloraz solution were rinsed with water several times, prochloraz was removed $9.2\sim10.6%$ at the first rinse and less than 3 % at the fourth rinse. A half life of prochloraz was $4\sim5$ days in aqueous system. Hydrolysis of prochloraz was more rapidly in alkali solution than neutral and acidic one at $25^{\circ}C$ and $35^{\circ}C$. By the irradiation under $5530J/cm^2$ using xenone lamp, prochloraz was photo-degraded to 87.7% in aqueous system. The removal efficiency of prochloraz by addition of several agricultural materials were as follows: 93.6% by lime, 90.7% by composed pig manure, 89.4% by activated charcoal, 78.0% by straw ash, 70.3% by sandy loam soil, 47.0% by zeolite and 24.1 % by rice straw. When prochloraz solution was sprayed on the field soil, it was dissipated upto 90% within 35 days.

• Resources Recycling
• /
• v.7 no.3
• /
• pp.17-26
• /
• 1998

A study on the recovery of silver and nitric acid in the liquid waste resulted from the mediated electrochemical oxidation(MEO) process was conducted. The removal of silver in the concentrated nitric acid solutions was carried out by the electrodeposition. The removal efficiency more than 98% could be obtained in nitric acid concentrations less than 3 M with the current efficiency of nearly 100%. The experimonts on the evaporation for the recovery of nitric acid were performed as well. At the evaporation factor of 25., the degree of nitric acid recovery in 3.5 M nitric acid solution containing 0.5 to 1.0 mol% NaNO, was 80~90% resulting in 2.8~3.1 M nitric acid. The design factors and operating conditions of the distillation tower were analyzed by using MEH model derived by Maphtali-Sandholm with the throughput of 4 kg/hr for the enrichment of dilute nitric acid solution recovered by evaporation to reuse in the MEO process. The distillation column composed of eleven theoretical stages having the overall tray efficiency of 70% are needed to obtain 1.03 kg/h of 12M nitric acid and 2.97 kg/h of water with feed being introduced to the column at tray 6 from the bottom at the reflux ratio of 0.25, the reboiler with the heat load of 2.7 kW, and the condenser with the cooling load of 0.5 kW.

• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.529-532
• /
• 2002

The angiotensin converting enzyme (ACE) inhibitory activity in peptic hydrolysate of raw anchovy cooking discards was 51.3% at 1 mg of protein per $100\;{\mu}L$ sample solution. While, after the treatment of pepsin for 4 h, was 65.8%. The crude peptides fractionated through Bio-gel P-2 column chromatography consisted of five fractions $({P-1}{\sim}{P-5})$ and had maximum inhibitory activity in the fraction P-2 ($IC_{50}$=0.319 mg protein/mL). The fraction P-2 was rich in aspartic acid, glutamic acid, and glycine.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.5-14
• /
• 2023

In this study, LiDAR-reflective black hollow-structured silica/titania(B-HST) materials are successfully synthesized by employing the NaBH₄ reduction and etching method on silica/titania core/shell(STCS) materials, which also effectively enhance near-infrared(NIR) reflectance. Moreover, core-etched supernatant solutions are collected and recycled for the synthesis of extracted silica(e-SiO₂) process, which successfully applies as filler materials for semiconductor epoxy molding compound(EMC). In detail, B-HST materials, fabricated by the sequential experimental steps of sol-gel, reduction, and sonication-mediated etching method, manifest blackness(L^*) of 13.2 similar to black paint and excellent NIR reflectance(31.1%). Consequently, B-HST materials are successfully prepared as LiDAR-reflective black materials. Additionally, core-etched supernatant solution with silanol precursors are employed for synthesis of homogeneous silica filler materials via sol-gel method. As-synthesized silica fillers are incorporated with epoxy resin and carbon black for the preparation of semiconductor EMC. Experimentally synthesized EMC exhibits comparable mechanical-chemical properties to commercial EMC. Conclusively, this study successfully proposes designing procedure and practical experimental method for simultaneously synthesizing the NIR-reflective black materials for self-driving vehicles and EMC materials for semiconductors, which are materials suitable for the industrial 4.0 era, and presented their applicability in future industries.

• Nuclear Engineering and Technology
• /
• v.11 no.3
• /
• pp.203-212
• /
• 1979

The thermal decomposition of simulated Magnox highly active waste and of HARVEST feed slurries (SW and SG) which include tile glass forming chemicals has been studied. The waste and the slurries are almost completely calcined by 500-55$0^{\circ}C$. The colour of the solids from the slurries varies little until about 90$0^{\circ}C$ when it darkens considerably. The slurries begin to vitrify at this temperature and are completely vitrified at 1000-105$0^{\circ}C$. On the other hand. the sulphate impurity in SN slurry causes a yellow phase to separate above 75$0^{\circ}C$. The density of the intermediate solids is fairly low until 650$^{\circ}$-$700^{\circ}C$ is reached. This temperature seems to mark the onset of fluxing as tile density rises quickly to 2g/㎤ at 700$^{\circ}$ -80$0^{\circ}C$. The strengh of the solids decreases with temperature up to 50$0^{\circ}C$, and then rises as the solids begin to sinter. Below 50$0^{\circ}C$ the SN solids are the stronger. suggesting that the impurity renders this silica more reactive.

• Clean Technology
• /
• v.3 no.2
• /
• pp.28-30
• /
• 1997

발효 아미노산을 분리하는 기존의 공정인 이온교환법에서 폐액 및 폐수처리에 따른 문제점을 해결하기 위한 새로운 분리공정으로 탈염 전기투석과 Water-splitting Electrodiaysis를 이용한 발효 아미노산의 분리 가능성 및 다양한 cell configuration과 막에 대한 성능 실험을 실시하였다. 실험결과 전기투석에 의해 경도물질을 제거한 후 양이온교환막과 bipolar 막으로 구성된 2-compartment WSED로 효과적으로 발효액에서 아미노산을 분리 할 수 있었으나 1가 양이온에 선택성을 지닌 양이온교환막으로는 아미노산의 분리가 어려움을 알 수 있었다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.238-238
• /
• 2004

우라늄 변환시설은 중수로용 $UO_2$ 분말 제조 시설로서 2001년도부터 제염 해체를 통한 변환시설 환경복원사업을 시작하였다. 변환 공정의 운전 중 발생하여 라군(lagoon)에 저장되어 있는 방사성 슬러지 폐액의 처리는 시설의 해체과정에서 매우 중요한 업무중의 하나이다. 라군 슬러지의 주성분은 $NH_4NO_3$, $NaNO_3$, $Ca(NO_3)_3$, $CaCO_3$ 및 U 화합물과 소량의 Fe, Mg, Al, Si 및 P 화합물로 구성되어 있다.(중략)