• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.23-23
• /
• 2016

우리나라의 댐저수지는 홍수기에 상류로부터 다량의 부유물이 폐기물 등과 함께 일시에 유입되어 미관을 해치거나 상수원 수질을 악화시키는 등의 문제점을 가지고 있다. 이에 부유물의 하류확산을 방지하고 수거와 처리를 효율적으로 하기 위한 부유물 차단망이 설치되어 운영 중이다. 부유물 차단망의 설치위치는 저수지내의 흐름을 고려하여 부유물을 가장 효과적으로 차단할 수 있는 지점을 선정하여야 하나, 저수지 흐름을 고려하지 않고 설치될 경우 차단망이 빈번하게 훼손되거나 부유물이 적절하게 포집되지 못한 채 상류에 흩어지는 결과를 초래하기도 한다. 본 연구에서는 대형저수지인 소양댐과 신규 중소규모 댐인 영주댐의 부유물 차단망 최적 설치위치를 선정하기 위하여 3차원 모형을 이용하여 다양한 조건에서의 저수지내 흐름분포와 수리적 특성을 검토하였다. 적용모형은 3차원 수리동력학 모형인 ELCOM 모형을 적용하였으며, 홍수기 표면 유속장 분포, 수직수온분포 및 밀도류 발생지점 등을 종합적으로 분석하여 최적 설치지점을 검토하였다. 시뮬레이션 조건은 200년 빈도 홍수 유입에 대해 초기 수위에 따른 영향을 고려하기 위하여 갈수위, 풍수위 등으로 구분하여 분석하였다. 분석결과, 소양댐의 경우 기존 설치위치에서는 plunging point가 설치지점보다 하류에 위치하여 부유물 포집 기능에는 이상이 없으나 최대유속이 2 m/s를 초과하는 것으로 나타나 안정적 운영을 위하여 이전 설치하는 것이 적합할 것으로 판단되었다. 또한 신규댐인 영주댐에서는 다양한 시나리오에 대하여 분석한 결과 2개 지점이 적합한 것으로 분석되어 적치장 위치 등을 종합적으로 고려하여 최적위치를 선정하도록 하였다. 이와 같은 연구 결과는 부유물 차단망 설치설계기준 등에 반영되어 과학적인 댐 운영관리에 활용될 것으로 판단되며, 향후 보다 안정적인 시설물 관리에 기여할 수 있을 것으로 사료된다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.3
• /
• pp.75-81
• /
• 2022

Under the government's principle of paying for emissions, the RFID-based pay-as-you-go system, which charges fees in proportion to emissions, was fully implemented in 2012. As of the end of 2018, the penetration rate is about 40% based on 149 local governments and multi-family apartments nationwide. The introduction of equipment showed a reduction effect of about 20-30%. Problems with existing equipment also began to appear. This study tried to improve by applying and integrating the existing technologies to solve the fundamental problems of these inlets. In other words, the plan is to improve the environment around the food waste meter by changing the design so that the hopper goes deep into the food waste bin inside the food waste meter so that the food waste becomes full and is designed smoothly when replacing the collection container.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.302-310
• /
• 2020

In this paper, we have implemented the living waste analysis system based on IoT and AI(Artificial Intelligence), and proposed effective waste process and management method. The Jeju location have the strong point to devise a stratagem and estimate waste quantization, rather than others. Especially, we can recognized the amount variation of waste to the residence people compare to the sightseer number, and the good example a specific waste duty. Thus this paper have developed the IoT device for interconnecting the existed CCTV camera, and use the AI algorithm to analysis the waste image. By using these decision of image analysis, we can inform their deal commend and a decided information to the map of the waste cars. In order to evaluate the performance of IoT, we have experimented the electromagnetic compatibility under a national official authorization KN-32, KN61000-4-2~6, and obtained the stable experimental results. In the further experimental results, we can applicable for an data structure for precise definition command by using the simulated several waste image with artificial intelligence algorithm.

• Resources Recycling
• /
• v.6 no.2
• /
• pp.22-28
• /
• 1997

In recent yean thc problem of wastc plastics arc greatly incrcascd with ihe result uf lndushial growth. As a rcsult the amount of wastc plaslics in domestic area is appraxhnately 2,300,000 t<~nin 1996 base and contmuously increasing more than 12% cvcry ycar. Thc disposal way of these waste plastics arc dlLl malnly rely~ng on landill1 or partially incinuralion So that it hss become a senous social problem due to the second envirnmentd pollution. The tcchnologics iar prducing oil from the waste plastics have hccn dcvelopcd far along pennd and currently some of them are in a commercialiration stage Pyrolysis process in one of the major process m heating waslc plaslics bul still has some restlichons for the cammcrc~dizatian duc lo 11s emnom~cal problems assaciated with a systcmiltlc lecd collcctionidispnsJ ways. Cansldenng cnvaomcnld problems, thc inclease m the charge for waste matcds trcatmcnt and thc lmlitarion ni disposal area, it is inteicstcd that the wastc plastics treabncnt by pyrolysn. which would be the safest and the most eilic~ent process for cnnvcrting fecd wastc to rc-usablc rcsourccs. would he predomhant m ihe near h~lurc Thc shldy aims inr the development of haslc ted~nolagy for scaling up to a com~nercial sire through pyrolys~s process which is cnnduclcd under the absence of air. Furthern~orc the waste plastics can be recycled as iual gas or oil wilhout harmful effects in enviroment, The waste w e d plastics arc pyrolyzed in (he fluidized bcd rcaclor under continuous way and thc ail ylcld gives approx~marcly 47 4%.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.906-917
• /
• 2022

This study aimed to compare differences according to categories of fishery and marine environmental policies for the (estimated) amount of fishery waste generated by fishing, and to analyze the correlation between associated independent and dependent variables. The independent variables were divided into three dif erent sectors. The first sector included precautionary policies that observed eco-friendly fishing support program, institutional prevention activities, and physical barriers installation. The second sector with the current management policies included the relevant vessel operations, establishment of fishery order, fishery restructuring, and fishery ground clean-up. Thirdly, post-response policies comprised the litter purification from river to shoreline, the collection and removal of marine, sedimentary, and floating debris, purchasing salvaged debris generated while fishing, fishery waste disposal, and repairing damage caused by marine litter. The indicator used was the settlement amount by each program. The dependent variable was the estimated amount of fishery waste and the indicator was the sum of the loss of traps and gill nets and the loss of their appendages. According to the results of Kruskal-Wallis Test, the estimated amount of fishery waste was highest in the East Sea in terms of sea area and the highest in the Si(city) according to basic local municipality. The settlement amount related to the marine environment services was largest in the Gun(county). Further, there were significant differences between Gun(county) and the other regions(Si(city) and Gu(autonomous district)) with respect to most variables. The variables related to the estimated amount of fishery debris were the project purchasing salvaged debris generated while fishing and fishery waste disposal program in the post-response policies.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.110-120
• /
• 2005

For utilizing vitrification to treat low and intermediate level waste, industrial pilot plant was designed and constructed in October 1999 at Daejon, Korea through the joint research program among NETEC, MOBIS and SGN. More than 70 tests were performed on simulated IER, DAW etc. including key nuclide surrogate(Cs, Co); this plant has been shown to vitrify the target waste effectively and safely, however, some dust are generated from the HTF(High Temperature Filter) as a secondary waste. In case of long term operation, it is also concerned that pipe plugging can be occurred due to deposited dust in cooling pipe namely, connecting pipe between CCM(Cold Crucible Melter) and HTF. In this regard, we have developed the special complementary system of the off-gas treatment system to recycle the dust from HTF to CCM and to remove the interior dust of cooling pipe. Main concept of the dust recycling is to feed the dust to the CCM as a slurry state; this system is regarded as of an important position in the viewpoint of volume reduction, waste disposal cost and glass melt control in CCM. The role of DRS(Dust Recycling System) is to recycle the major glass components and key nuclides; this system is served to lower glass viscosity and increase waste solubility by recycling B, Na, Li components into glass melt and also to re-entrain and incorporate into glass melt like Cs, Co. Therefore dust recycling is helpful to control the molten glass; it is unnecessary to consider a separate dust treatment system like a cementation equipment. The effects of Dust Cleaner are to prevent the pipe plugging due to dust and to treat the deposited dust by raking the dust into CCM. During the pilot vitrification test, overall performance assessment was successfully performed; DRS and Dust Cleaner are found to be useful and effective for recycling the dust from HTF and also removing the dust in cooling pipe. The obtained operational data and operational experiences will be used as a basis of the commercial facility.

• KSBB Journal
• /
• v.10 no.1
• /
• pp.1-8
• /
• 1995

A lot of water soluble proteins and lipids are released from minced mackerel meat and lost into the washing waste during the leaching process of Kamaboko or surimi manufacture. The removed proteins and lipids are not only an edible things but also a big burden for treating the wastewater. In order to recover the proteins from the effluent and to use as food stuff, the "pH-shifting" treatment, a modified isoelectric point precipitation method, was tried. This method is based on a myogen-aggregation phenomenon, which occurs when a solution of sarcoplasmic proteins is acidified or alkalified beyond the critical pH zone of 2∼3 or 12∼13 respectively and then neutralized. The maximum amount of precipitation was obtained by shifting the pH of the wastewater from original pH to isoelectric point (pH 4) or alkali pH 12 and then changing to neutral pH. The precipitates were easily collected by filteration or centrifuging at 10,000rpm. The oils which were only floating in the washing wastewater are easily recovered by seperating with oil separator after pouring. The recovered proteins were slightly denaturated during this pH shifting precipitation process, while the composition of amino acids was good balance as a food.

• Journal of Food Hygiene and Safety
• /
• v.13 no.3
• /
• pp.201-205
• /
• 1998

In Korea, a small proportion of fishery products are contaminated with a considerable amount of potentially hazardous contaminants. So, there is generally a high risks to consumers. Inorganic contaminants with the greatest potential for toxicity are Sb, As, Cd, Pb, Hg, Se and the Sulfides. As appears to be much more variable than the others. This study was performed to assess the levels of the As in fisheries caught from the waters of the western coast of Korea. The samples included 26 kinds of fishes, 18 kinds of Mollusca, 3 kinds of Crustacea and 7 kinds of salted fishes. The Moisture content of molluscans was significantly higher than that of others (p<0.05). And the As contents of crustaceans were significantly higher than those of fishes, molluscans and salted fishes (p<0.05). The As content of Turban shell was 51.62 ppm, which was the highest among the samples. Also, the As contents of eel, cuttle fish and blue crab were found to be higher than in other fisheries. This variability offers a solution for the reduction of exposure to As through restricting the harvest of aquatic organism from the western coast of Korea.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.14-21
• /
• 2018

The rapid increase in the consumption of products that contain rare metals has highlighted the importance of recycling and recovering resources from these products when they enter the waste stream. Among various metal resources that can be recovered, this study analyzes the waste streams of cobalt and palladium to determine how their waste resource circulation can be improved at each stage of the waste stream. The findings of this study point to improvements and strategies that can be made at individual stages. First, at the discharge/import stage, the implementation of tariff quotas for specific recycled metal resources is suggested to allow the systemic categorization of waste metals as resources. At the collection/discarding stage, a major problem is the instability in the supply of scrap metals, which may be better managed by changing the bidding process for the scrap metals. At the pretreatment stage, possible areas for improvement are uncovered concerning technical areas, such as technological development and improving the efficiency of material recycling, as well as policy-wise, for instance, expanding the regulation for manufacturers to produce products that are designed to facilitate resource recovery, increasing incentive for closed recycling, and refining the guidelines and standards for recycling. At the resource recovery stage, as the waste metal recycling industry consists of businesses that vary in size, policies to promote cooperation and coexistence between large and smaller enterprises will benefit the industry in the long-run. Lastly, at the product production/export stage, a tariff on exporting waste resources that contain cobalt and palladium will help control the amount of waste metals that are shipped abroad.

• Clean Technology
• /
• v.17 no.4
• /
• pp.336-345
• /
• 2011

The total area of forest land in Korea is 64.2%, and significant forest resources can continuously be produced. However our country didn't separate the recyclable waste wood and was illegal landfill or incinerated. In this study, waste-wood and rice husk of biomass and low-grade-anthracite made refuse derived fuel by mixing and compressing. In addition, the binding effect of binders and additives were analyzed. Physical and chemical characteristics of manufactured refuse derived fuel were analyzed and evaluated suitability by compared with quality standards. A result of change with compressed and relaxed density, added 20% anthracite and 10% rice husk is optimal density change and average density increased large range when 20 wt.% P.V.A., guargum, molasses and 10 wt.% starch were added. All fuel samples be distributed over 3,500 kcal/kg LHV and grade of No. 3~4 fuels appeared. A result of the characteristics of physical and chemical compressed biomass refuse derived fuel with addictive, 12.9% of durability improvement appeared when is mixing asphalt and 5.8% of durability improvement appeared when is mixing rice bran by pretreatment of NaOH 5%.