• Nuclear Engineering and Technology
• /
• v.26 no.4
• /
• pp.578-599
• /
• 1994

방사성 폐기물 처분장의 건설에 가장 중요한 부분중의 하나는 처분안전성의 확보일 것이다. 처분장 안전성평가는 처분장이 입지하는 환경에 대한 실험실적 자료 또는 현장 자료의 충분한 데이타베이스와 처분시스템에서 일어날 수 있는 주요한 프로세스를 기술하는 수학적 모델을 통하여 이루어지게 된다. 처분시스템의 기본적인 기능은 처분된 폐기물고화체를 인간환경으로 부터 완벽하게 고립시켜 처분장내에 영구적으로 격리시키는 것이다. 그렇지만 정상적이든 비정상적이든 핵종은 항상 유출될 가능성이 있고 설사 이러한 경우라도 충분히 안전한 것을 입증하는 것이 처분장 성능 평가와 안전성평가의 주요한 목적이 된다. 한편 장기간에 걸친 처분 안전성 평가는 전산 프로그램을 통한 이론적 예측에 의해서만 가능하므로, 처분안전성 평가도구의 개발 및 확보의 중요성은 매우 크다고 할 수 있다. 이 연구에서는 처분장이 입지하는 암반 매질에서의 핵종의 이동을 기술할 수 있는 여러 모델을 검토하고, 특정 처분부지에 대한 종합적 안전성 평가를 수행할 수 있는 방법론을 제시할 목적으로 임의의 1개 부지의 지형도및 추정가능한 지질관련 자료를 이용하여 해당 부지에 대한 가상의 핵종 유출 시나리오를 설정하여 부지특성적인 예비 종합 안전성 평가를 수행하여 보았다.

• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.245-253
• /
• 2017

Vietnam CFBC fly ash has high CaO content and can be used as a solidification agent for soft ground improvement. However, most fly ash is treated as landfill or waste. In order to utilize fly ash as a solidification agent for soil improvement, the characteristics of fly ash must be accurately determined. In this study, laboratory tests were conducted on fly ash from four CFBC power plants to evaluate the utility of Vietnam fly ash as a solidification agent. As a result of analyzing the physical properties, it was analyzed that all four samples were suitable as material for solidification agent and have suitable particle size for the improvement of soft ground. As a result of analysis of chemical characteristics, it was analyzed that the fly ash of one place could be used as a solidification agent because of the high content of free-CaO. The remaining three fly ash was not suitable for use as a solidification agent due to low Free-CaO content. However, it has a chemical composition similar to that of general fly ash in Korea, so it can be recycled in various ways.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.49-55
• /
• 2001

본 논문에서는 서해안 폐기물 매립지 하부의 점성토와 고화차수재를 재료로 수행된 확산시험 결과와 현장 조건을 적용하여 오염물이동성에 대한 수치해석을 수행하였다. 무기화합물이 하부 차수재와 원지반퇴적층으로 이동되는 일차원 이동 특성을 대상으로 하였으며 일차원 용질이동해석 프로그램 CDFD(convection-dispersion finite difference)를 현장의 비균질한 지층에 이용할 수 있도록 수정하여 적용하였다. 그 결과 원지반점성토를 통한 용질이동 메카니즘에 확산이 기여하는 정도가 50%로 매우 큰 영향을 갖고 있음을 보여주며 원지반 투수계수가 클수록 인공차수층의 필요성이 증대됨을 알 수 있었다.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.05a
• /
• pp.224-227
• /
• 2005

본 연구에서는 국내 폐금속광산의 대표적인 폐기물 중 상동광산광미를 안정화, 고형화 및 감량화 시키기 위한 일환으로 광미를 실용적인 흙도로 포장재료로 사용하기 위한 모르타르 실험을 실시하였다. 모르타르에 사용된 고화제는 시멘트계 고화제를 사용하였으며, 상동광미는 대상 흙에 대하여 10% 중량비 치환한 경우 강도증진 효과가 있었다 따라서 상동광미를 흙도로용 포장재료로 사용할 수 있는 가능성을 얻을 수 있었다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.305-306
• /
• 2023

Recently, as the radioactive waste disposal facility becomes scarce, the importance of efficient disposal of waste from nuclear power plants is increasing. This study was conducted to utilize radioactive waste concrete powder as solidifying agent for radioactive waste treatment. Paste with an age of more than one year was used with a disk mill to have a particle size of 150㎛ or less, and treated at temperatures of 500℃, 600℃ and 700℃ for 2 hours. In order to simulate the radioactive cement powder, aqueous solutions of Di-water, CsCl 1M, SrCl₂ 1M and CoCl₂ 1M were used as blending water at W/C 0.7 and to improve fluidity, polycarboxylate type superplasticizer was used at 0.4 wt.% based on the weight of recycled cement paste powder. Characterisation was carried out using vicat method, strength and density.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.1
• /
• pp.15-22
• /
• 2001

The key part in risk assessments for disposal sites of solidified/stabilized (S/S) wastes is to predict the contaminant transport from the S/S wastes to the environment under dynamically changing field conditions after characterizing chemical leaching properties of the ash, to evaluate the risk from the predictions, and finally to decide the risk is acceptable. In this paper, a risk assessment framework for disposal and reuse of S/S wastes was developed considering two limiting cases of contaminant leaching. Two types of waste characterization procedures that can determine waste-specific variables for the two limiting cases were developed and verified by applying them to a landfill site of the Municipal Solid Waste incinerator ash solidified/stabilized by cement.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.2
• /
• pp.15-29
• /
• 2020

The aims of this study is to improve physical properties of the sewage sludge and the process sludge generated in the leachate treatment by mixing the dry fuel, to develop the neutral solidifing agents that reduce oder, and to recycle the sewage and the process sludges as landfill cover materials. The mixing ratio (W/W) of sludges and dry fuel was appropriate at about 1:1, and the mixed materials were shown to be homogeneous at that ratio. We could know that when the sludges were mixed with dry fuel, moisture contents and viscosities are reduced, and air passages are formed between particles and particles. The various mixing tests and odor tests showed that the neutral solidifing agent was effective for the odor reduction. The main ingredient of the solidifing agent is the ash of sewage sludge, enabling it competitive in waste recycling and production costs. The landfill cover, using developed neutral solidification agent, improved physical properties to satisfy the quality standards and to increase the compressive strength. It also proved to reduce the value of complex oder and the usage of solidification agent to 1/3 (3,000 to 1,000) and to 1/8 (50% to 6%), respectively, from the comparative study with alkaline solidified landfill cover. Further research is under way to prove that this can be mixed with general soil to be used as a soil improvement agent for plant cultivation.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.12
• /
• pp.1327-1331
• /
• 2005

This study was to investigate the reduction of hydration heat by utilizing industrial by-products such as BFS(Blast Furnace Slag). DM(Dredged Mud) was used by parent soil and Ordinary portland cement was used by cementing material. Additive added to reduce the heat of hydration was BFS. From the results of experiment, hydration heat was decreased in accordance with the addition of BFS. The reason was that surface of BFS coated with aluminosulfate. Initial uniaxial strength was low, neither was not long term uniaxial strength. It was concluded that silica rich layer($H_2SiO_4^{4-}$) in solid phase early in the reaction of hydration was difficultly moved in liquid phase due to the increase of ZP(Zeta Potential). However, the ZP in the later hydration was decreased due to the acceleration of mobility of silica rich layer($H_2SiO_4^{4-}$). Therefore, long term physical properties such as uniaxial strength revealed.

• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.839-845
• /
• 2001

In order to vitrify the Ion-Exchange Resin(IER), Dry Active Waste(DAW), and borate concentrate generated from the commercial nuclear facilities, the glass formulation study based on the their compositions was performed. Two glasses named as RG-1 and DG-1 were formulated as the candidate glasses for the vitrification of hte IER and DAW, respectively. A glass named as MG-1 was also formulated as a candidate glass for the vitrification of the mixed wastes containing the IER, DAW, and borate concentrate. The process parameters, product qualities, and economics were evaluated for the candidate glasses and confirmed experimentally for the some properties. The glass viscosity and electrical conductivity as the process parameters were in the desired ranges. the product qualities such as glass density, chemical durability, phase stability, etc. were satisfactory. In case of vitrifying the wastes using our developed glass formulation study, the volume reduction factors for the IER, DAW and mixed wastes were evaluated as 21, 89 and 75, respectively.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.1
• /
• pp.57-65
• /
• 2005

This study suggested a new method for the solidification of molten salt waste generated from the electro-metallurgical process in the spent fuel treatment. Using binary material system, sodium silicate and phosphoric acid, metal chlorides were converted into metal phosphate in the micro-reaction module formed by SiO$_{2} particles. The volatile element in the reaction module would little vaporized below 1100$^{circ}$C After the gel product was mixed with borosilicate glass powder and thermally treated at 1000$^{circ}$C, li exists as Li$_{3}$PO$_4$ separated from glass phase and, Cs and Sr would be incorporated into an amorphous phase from XRD analysis. In case of the addition of ZrCl$_{4}$ to the binary system, the gel products were transformed into NZP structure considered as an prospective ceramic waste form after heat-treatment above 700 $^{circ}$C. From these results, the gel-route pretreatment can be considered as an effective approach to the solidincation of molten salt waste by the confirmed process or waste form and this also would be an alternative method on the ANL method using zeolites in USA by the confirmation of its chemical durability as an future work.