• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.789-792
• /
• 2008

Blast furnace slag doesn't have self-hydraulicity and it needs stimulants such as alkali to hydrate. Therefore using recycled aggregates erupted calcium hydroxides and blast furnace slag acquiring alkali stimulate could make a complementarily use of a recycling architectural material possible. In this study, we have discussed about characters of blast furnace slag and recycled aggregate firstly, and make recycled aggregate mortar and concrete using blast furnace slag for the experiment. The experiment is about mortar and concrete using recycled aggregate as a substitutional material of blast furnace slag. In this experiment, I replace blast furnace slag and aggregate with recycled aggregate. Conclusions through the test results analysis are as follows. And then, we added field experiment using concrete with composited materials.

• Resources Recycling
• /
• v.11 no.6
• /
• pp.3-11
• /
• 2002

Recently, waste printed circuit board (PCB) has significantly increased in its amount due to the rapid development of electronic industries. Since several kinds of noxious materials and also valuable metals are contained in it, the waste PCB is in an urgent need of recycling for the dual purposes for the prevention of environmental pollution and recovery of valuable resources. Also, the catalyst which equipped in the exhaust pipes of automobiles to reduce emission of air pollutants contains precious met-als so that their recovery from the waste auto-catalysts is required. In this study, the recovery of valuable metals from waste PCB and auto-catalyst by arc furnace melting process has been investigated, which is known to be very stable and suitable f3r less production of pollutants due to its high operating temperature. The effect of the kind of flux on the recovery of precious metals was examined by using quicklime, converter slag, and copper slag as the flux. In addition, the influence of direct and alternating current and the applying direction of direct current has been investigated. It was observed that using converter or copper slag as a flux was more desirable for a higher efficiency in the precious metal recovery compared with quicklime. For the effect of current, application of direct current taking the bottom as a negative pole generally showed a better efficiency for the extraction of valuable metals from waste PCB, which was also observed for the case of waste auto-catalyst. The average recovery of precious metals from both wastes by arc furnace melting process was very high, which was up to in the range of 95～97%.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1027-1035
• /
• 2000

This study was carried out to investigate the treatability of landfill leachate having high concentration of ammonium nitrogen with/without the circulation of media in pilot-scale($48m^3basis$) process. Total nitrogen removal efficiency was relatively increased in the media added process (influent ; $1.230{\sim}2,000mg{\cdot}l^{-1}$, effluent ; $120{\sim}250mg{\cdot}l^{-1}$) compared with the control process. The difference of nitrogen removal efficiency between these processes may be due to that stable growth of nitrifiers attached to the media could be achieved 99.3% of ammonium-nitrogen removal efficiency(without ; 98.2%) and 88.5% of total nitrogen removal efficiency(without ; 85.8%) were shown in media added process, respectively. Also, optimum BOD/ $NH_4{^+}$-N ratio was relatively decreased in the media process compared with the control process. Sludge settleability, on the other hand. was shown better in media added process than in control process. This outstanding sludge settleability in the media added process indicates the compatibility of media(zeolite) to the microorganism and the possibility of using media of biofilm process.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.2
• /
• pp.101-112
• /
• 2016

This study investigated the removal of Sr, which was one of the high radioactive nuclides, by adsorption with Barium (Ba) impregnated 4A zeolite (BaA) from high-radioactive seawater waste (HSW). Adsorption of Sr by BaA (BaA-Sr), in the impregnated Ba concentration of above 20.2wt%, was decreased by increasing the impregnated Ba concentration, and the impregnated Ba concentration was suitable at 20.2wt%. The BaA-Sr adsorption was added to the co-precipitation of Sr with $BaSO_4$ precipitation in the adsorption of Sr by 4A (4A-Sr) within BaA. Thus, it was possible to remove Sr more than 99% at m/V (adsorbent weight/solution volume)=5 g/L for BaA and m/V >20 g/L for 4A, respectively, in the Sr concentration of less than 0.2 mg/L (actual concentration level of Sr in HSW). It shows that BaA-Sr adsorption is better than 4A-Sr adsorption in for the removal capacity of Sr per unit gram of adsorbent, and the reduction of the secondary solid waste generation (spent adsorbent etc.). Also, BaA-Sr adsorption was more excellent removal capacity of Sr in the seawater waste than distilled water. Therefore, it seems to be effective for the direct removal of Sr from HSW. On the other hand, the adsorption of Cs by BaA (BaA-Cs) was mainly performed by 4A within BaA. Accordingly, it seems to be little effect of impregnated Ba into BaA. Meanwhile, BaA-Sr adsorption kinetics could be expressed the pseudo-second order rate equation. By increasing the initial Sr concentrations and the ratios of V/m, the adsorption rate constants ($k_2$) were decreased, but the equilibrium adsorption capacities ($q_e$) were increasing. However, with increasing the temperature of solution, $k_2$ was conversely increased, and $q_e$ was decreased. The activation energy of BaA-Sr adsorption was 38 kJ/mol. Thus, the chemical adsorption seems to be dominant rather than physical adsorption, although it is not a chemisorption with strong bonding form.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.1
• /
• pp.15-21
• /
• 2015

Recently, attempts of replacing some of natural aggregate with mix of low quality aggregate are carried out for stable supply of aggregate. However, low quality aggregate such as recycled aggregate produced during the disposal process of construction wastes and by-product aggregate produced by industrial activities has problem of failing to comply to KS Standards. Therefore, we have compared fundamental properties of concrete by using granite crushed aggregate, recycled aggregate, blast furnace and electric arc furnace slag aggregate for effective utilization of lacking aggregate resources. As the result, slump in case of mixed use of aggregate was increased 0~10% compared to single use. Therefore, it is judged to be economically advantageous as it can expect effects in unit quantity or reduction of SP agent. Compressive strength in case of mixed use of aggregate was increased 0~10% compared to single use as it filled internal crevice of concrete with continuous particle size distribution. Accordingly, if we utilize by satisfying standard particle scope through mix of aggregate with different cause of formation in proper ratio, it was possible to confirm utility of mixed aggregate with demonstration of effects of increases of fluidity and compressive strength of concrete.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.2
• /
• pp.70-78
• /
• 1989

This experiment was carried out to develop the preparation method of chitosan which has strong antimicrobial activity, and also tried to investigate as a natural food preservative with this chitosan. The antimicrobial activity of chitosan was the strongest when deacetylation of chitin was conducted at $146^{\circ}C$ for 8 hours with $50\%$ sodium hydroxide. The growth of Escherichia coil was completely inhibited by adding this low molecular weight chitosan (M. W, 35,000) at the level of concentration of 75ppm to the medium. The antimicrobial activity was strong enough against such Gram positive bacteria as Staphylococcus sp. and Bacillus sp.. The growth of these strains was inhibited by the concentration of 50ppm but it was varied in its kinds against Gram negative bacteria. The concentration of chitosan re-quired for growth inhibition of microorganisms was 100ppm against Pseudomonas sp. and Vibrio sp., 2,000ppm against Salmonella sp.. The growth of Saccharomyces sp. was inhibited by the concentration of 100ppm, but Hansenula sp., Aspergillus sp., Penicillium sp. and Mu-cor sp. did not inhibited by even more than the concentration of 5,000ppm. The shelf life of Mulkimchi (pickle type Kimchi), containing $0.2\%$ chitosan was 10 days longer than control stored at $5^{\circ}C$.

• Journal of Radiation Protection and Research
• /
• v.34 no.4
• /
• pp.190-194
• /
• 2009

Gamma spectral results for macroalgae samples taken from the environment of Ulchin nuclear power plants in Korea (east coast), showed 766 keV peaks, which were identified as $^{95}Nb$ by several research institutes. After the enhancement of liquid radioactive waste disposal facility at Ulchin NPP site, the $^{95}Nb$ amount in the liquid radioactive waste outflow has drastically reduced, but the expected reduction in $^{95}Nb$ specific activity from environmental samples did not actually show up on gamma spectroscopy. Detailed re-investigation revealed that along with 766 keV peak, other peaks (63, 92 and 1001 keV) from $^{234}Th-^{234}mPa$ decay series were also detected on spectroscopy, and that the measured half lives of the four peaks were very close to known half life of $^{234}Th-^{234}mPa$ decay series, which is 24.1 day. The measured gamma yield ratios of 766 keV peak to 1001 peak were very close to known ratio 0.35 for $^{234}mPa$. It is concluded that 766 keV peaks on gamma spectroscopy of Ulchin NPP environmental samples were mainly from $^{234}mPa$, which is one of naturally occurring radionuclides.

• Applied Biological Chemistry
• /
• v.51 no.1
• /
• pp.11-16
• /
• 2008

The extraction conditions for resveratrol production from grape fruit stem, which is a by-product of grape processing, were optimized to develop high-functional grape-based products. Additionally, the bioefficacy of grape fruit stem extract (GFSE) as an antioxidant agent was evaluated. Resveratrol was extracted using various experimental conditions such as extractant type, extractant concentration, raw material-extractant ratio, extraction time and temperature, and the results were analyzed using a statistical program (SPSS). The resveratrol yield was the highest when 80% ethanol with a raw-material-extractant ratio of 1:10 (w/v) was used. In addition, the optimal temperature and time were selected as $60^{\circ}C$ and 90 min, respectively. When the antioxidant activity was analyzed and expressed as DPPH radical scavenging activity and SOD-like activity, the antioxidant activity of GFSE was higher than that of BHT, BHA and L-ascorbic acid. Finally, it was found that GFSE could be used as a raw material for the production of high antioxidant agents.

• Journal of Environmental Impact Assessment
• /
• v.28 no.2
• /
• pp.152-168
• /
• 2019

The element arsenic, which is abundant in the Earth's crust, is used for various industrial purposes including materials for disease treatment and household goods. Various human activities, such as the disposal of soil waste, metal mining and smelting, and combustion of fossil fuels, have caused the pollution of the environment with arsenic. Recently, guidelines for arsenic in rice have been adopted by the Korean ministry of food and drug safety to prevent health risks based on rice consumption. Because of the exposure to arsenic and its accumulation in the human body through various channels, such as air inhalation, skin contact, ingestion of drinking water, and food consumption, integrated multimedia risk assessment is required to adopt appropriate risk management policies. Therefore, integrated human health risk assessment was carried out in this study using integrated exposure assessment based on multimedia (e.g., air, water, and soil) and multi-route (e.g., oral, inhalation, and dermal) scenarios. The results show that oral uptake via drinking water is the most common pathway of arsenic into the human body, accounting for 57%-96% of the total arsenic exposure. Among various age groups, the highest exposures to arsenic were observed in infants because the body weight of infants is low and the surface areas of infant bodies are large. Based on the results of the exposure assessment, the cancer and non-cancer risks were calculated. The cancer risk for CTE and RME is in the range of 2.3E-05 to 6.7E-05 and thus is negligible because it does not exceed the cancer probability of 1.0E-04 for all age groups. On the other hand, the cancer risk for RME varies from 6.4E-05 to 1.8E-04 and from 1.3E-04 to 1.8E-04 for infants and preschool children, exceeding the excess cancer risk of 1.0E-04. The non-cancer risks range from 5.4E-02 to 1.9E-01 and from 1.5E-01 to 6.8E-01, respectively. They do not exceed the hazard index 1 for all scenarios and all ages.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.3
• /
• pp.362-371
• /
• 1996

This study was conducted to investigate the biochemical properties of isolated bacteria, low temperature tolerant methanogens which were selected for use as inoculum for anaerobic fermentation of agricultural and livestock wasted at low temperature. The results, obtained were summarized as follows: Low temperature tolerant methanogens were isolated from the samples which showed the high methanogenesis rate by enrichment culture at low temperature in methanol medium. These methanogens, Methanobacterium M-251 and Methanobacterium M-253 were isolated from swampy sediment at latitude $56.9^{\circ}$, Methanosarcina mazei M-372 from lake sediment IV at latitude $55.0^{\circ}$ N, and Methanobacterium formicicum M-375 from tidal land soil at latitude $37.0^{\circ}N$, respectively. The isolated anaerobic bacteria could not use sugars as carbon sources. The optimum pH value for the growth of M-251 and M-375 was 6.8, but those for M-253 and M-372 6.5 and 7.0, respectively. The minimum growth temperature of isolated, M-251 and M-253 were $8^{\circ}C$ and the optimum temperature $30^{\circ}C$, while the minimum of M-392 and M-395 were $13^{\circ}C$ and the optimum $37^{\circ}C$. The growth rate of isolates at $17.5^{\circ}C$ were lower by 32-50% than that of $30^{\circ}C$. The isolated Methanobacterium strains such as M-251, M-253, and M-375 have lower cell yield, 0.38-1.21g/1M $CH_4$ than 1.14-1.51g/1M $CH_4$ of Methanosarcina mazei M-372.