• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.452-452
• /
• 2023

1970년대 이후 중화학공업을 중심으로 산업이 발전하면서, 위험한 기계·기구를 사용하게 되었다. 더 나아가 각 산업마다 새로운 공법을 채용하면서 산업재해가 과거에 비해 더 빈번하게 나타나고, 그 피해 역시 과거에 비해 매우 광범위하게 나타났다. 특히, 유해물질을 대량으로 사용하는 산업이 다양해지고, 작업환경 역시 각 산업에 따라 다른 모습을 보이자 이에 따른 직업병의 발생이 기하급수적으로 증가하였다. 이러한 위험은 직접적으로 근로자의 생명과 건강을 해칠 뿐 아니라 사용자에게도 경제적 피해를 주게 되었다. 이러한 위험에 효율적으로 대처하기 위하여 적극적·종합적인 산업안전보건관리가 필요하게 되어 산업안전보건법이 제정되었다. 하지만 산업안전보건법이 제정된 이후에도 같은 사고가 재발하고 현장관리의 소홀, 노동환경 개선 등이 이루어지지 않으며 비슷한 사망사고가 재발하였다. 이러한 산업재해사고를 막기 위해 다양한 방법을 강구하여 왔지만 큰 실효를 보지 못하자 실질적인 효과를 보기 위해 영국의 '기업살인법'을 참고하여 사업주, 경영주, 경영책임자에게 직접적인 책임을 묻고 중대재해 예방과 일하는 사람과 시민의 생명·신체를 보호함에 있음을 분명히 하기 위해 중대재해처벌법이 제정되었다. 이러한 법률이 제정됨에 따라 재해 및 안전에 관한 관심이 전국민적으로 증가하게 되었고 과거보다 많은 관심을 받게 되었다. 그에 따라 본 연구에서는 최근 10년간에 발생한 산업, 중대재해 등에 대하여 발생 사고, 발생 원인, 발생 기간에 따라 정리하였다. 본 연구는 향후 산업, 중대재해 등에 대한 기초자료로 활용될 수 있을 것이다.

• Resources Recycling
• /
• v.18 no.6
• /
• pp.46-53
• /
• 2009

The stone dusts produced during the manufacturing process of stone blocks are considered as one of industrial waste materials. This stone dusts are managed to either burying under the ground or stacking in the yard, but this disposal process is required an extra costs. The stone dust disposal like burying or stacking also cause environmental pollution such as ground pollution and subterranean water pollution. Thus, this study was conducted to explore the possibility of recycling stone dusts as a concrete mixing material in order to extend recycling methods. Based on the experiment results on various ratios of cement to stone dust content, the compressive strengths of concrete were recorded in the range of $20{\sim}30\;N/mm^2$. The results did not show any decrease in compressive strength due to the stone dust content. It can be concluded that the stone dusts produced by stone block manufacturing can be sufficiently recycled as one of concrete mixing materials in the aspect of compressive strength.

• Environmental and Resource Economics Review
• /
• v.9 no.1
• /
• pp.155-182
• /
• 1999

중국은 급속한 경제성장으로 인해서 에너지의 소비량이 급증하였으며 이는 석탄의 급증을 동시에 유발하였다 이러한 석탄 사용의 증가는 국내적으로는 대기오염의 악화를 초래하고 있으며, 국외적으로는 산성비의 원인이 되고 있다. 한편 수질오염도 심각하며 주원인으로는 도시폐기물이 약 40%, 산업폐기물로 인한 수질오염이 60% (1981 - 1995)을 차지하고 있으며 폐수처리물은 산업폐수가 77%이나 도시의 폐수처리는 7%에 불과한 것으로 알려져 있다. 이러한 환경오염으로 인한 총 사회적 비용은 1995년도의 경우 GDP의 8%로 추정되고 있으나 중국의 경제 성장이 현재와 같이 지속되고 청정생산, 에너지 효율 향상이 되면 2020년에 '95년의 사회적 비용의 75% 수준까지 저감시킬 것으로 세계은행은 예상하고 있다. (세계은행, 1998) 중국이 환경문제를 해결하기 위해서는 우선 에너지 효율 향상과 에너지 공급원의 다양화를 추진하는 것이며, 산업 보일러와 로에서 발생하는 배출량에 대한 저감에 대해서 노력해야 한다. 특히 수질오염의 방지를 위해서도 거의 무방지 지대인 중소기업에 대한 폐수처리 시설의 확충도 시급한 실정이며 자동차와 관련한 대기오염의 방지도 중요하다. 특히 시장 기능의 활성화를 유도하기 위해서는 공기업에게도 철저한 환경규제를 적용시켜야 하며, 환경비용의 내부화를 기하기 위해서 가격제도의 도입과 국제 무역의 자유화를 조기에 추진함으로서 환경기반산업을 육성할 수 있을 것이며 최소한 GDP의 1% 정도 되는 환경투자가 필요하다고 본다.

• Tunnel and Underground Space
• /
• v.29 no.4
• /
• pp.262-279
• /
• 2019

In the engineering barriers of high-level radioactive waste disposal, gases could be generated through a number of processes. If the gas production rate exceeds the gas diffusion rate, the pressure of the gas increases and gases could migrate through the bentonite buffer. Because people and the environment can be exposed to radioactivity, it is very important to clarify gas migration in terms of long-term integrity of the engineered barrier system. In particular, it is necessary to identify the hydro-mechanical mechanism for the dilation flow, which is a very important gas flow phenomenon only in medium containing large amounts of clay materials such as bentonite buffer, and to develop and validate new numerical approach for the quantitative evaluation of the gas migration phenomenon. Therefore, in this study, we developed a two-phase flow model considering the mechanical damage model in order to simulate the gas migration in the engineered barrier system, and validated with 1D gas flow modelling through saturated bentonite under constant volume boundary conditions. As a result of numerical analysis, the rapid increase in pore water pressure, stress, and gas outflow could be simulated when the dilation flow was occurred.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.04a
• /
• pp.472-480
• /
• 2010

작은 국토 면적에 비해 잦은 산불피해가 발생하는 우리나라에서 영농활동을 위한 소각은 산불의 중요한 원인이므로, 이를 방지하기 위해서는 발화원인자인 영농인들의 의식조사와 관리주체인 산불관련 담당공무원의 의식조사가 필요하다. 이를 위해 영농으로 인한 소각행위가 빈번한 지방자치단체를 대상으로 영농소각으로 인한 산불 금지와 관련된 제도에 대한 설문조사를 실시하였다. 조사결과 소각 금지법에 대해 영농종사자들은 대체로 긍정적으로 인식하고 있었으며, 공무원들도 산불예방에 효과가 있다고 인식하는 것으로 보아 소각 금지법은 산불예방을 위해 지속되어야 할 것으로 판단된다. 영농종사자와 공무원 모두 공동소각이 산불예방에 효과가 있다고 답변하였으며, 이에 대한 활성화 방안이 필요할 것으로 판단된다. 소각 금지 거리 100m에 대한 적정성은 영농종사자와 공무원 집단 모두 긍정적으로 인식하는 것으로 나타났으며, 소각신청 허가서의 산불예방효과에 대해서도 양 집단 모두 긍정적인 인식을 가지는 것으로 나타났다. 영농폐기물 소각 근절을 위해 영농종사자들은 '기간 내의 신고에 의한 합법적인 소각'을 가장 필요한 대책이라고 인식하고 있었다.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.2
• /
• pp.37-43
• /
• 2009

With the economic development of Korea, sewage treatment facilities and waste food treatment facilities have been steadily increased. These facilities have positive effects such as the conservation of the water resources quality and waste food recycling while they also affect the neighborhood life with severe odor problems. Therefore, it was first collected sludge samples from 5 sewage treatment facilities and 5 waste food treatment facilities where the amounts of waste produced from above sites are relatively immense in Busan and estimate the $H_2S$ emission rates. Then it was selected 1 sample which has the highest emission rate of $H_2S$. Using flux chamber and GC/FPD analyses, it was tried to quantify the emitted amount of sulfonic gas concentration under anoxic condition. The sludge sample obtained from Noksan sewage treatment facility has the highest emission rate of $H_2S$. This sample contained 156.18 mg/kg $H_2S$. The odor compounds were analyzed using GC/FPD and the concentrations were converted to odor quotient. Among odor compounds the ratio of $CH_3SH$ (methylmercaptan) for the total odor quotient was 47.3% and considered to be the main odor compound in the sample.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.2
• /
• pp.5-14
• /
• 2021

As the implementation of carbon reduction measures would be monitored starting from 2023 in line with the Paris Agreement, it is crucial and urgent to control GHGs emitted from wastes contributing to 11% of methane emissions. Despite such importance and urgency, 93% of wastes are deposited in unsanitary landfills in developing countries, presenting challenges to methane management. Against the backdrop, landfill gas-to-energy projects have once again drawn attention for their economic substantiality secured through CDM projects while there has been much research actively carried out to estimate methane emissions and GHG reductions in landfills located in developing countries. Although a signifiant difference was found between estimations calculated based on research methodologies and actual results monitored through registered CDM projects, there has not been a study conducted on what is causing such a difference. Accordingly, the research team conducted an analysis of 18 LFG projects out of 46 that were registered as LFG CDM projects under the UNFCCC and has identified precipitation(28%), malfunction(22%), organic content(11%), amount of landfilled waste(11%) and temperature(11%) as key parameters causing the difference between the amount of methane captured and the amount of GHG reduced.

• Geophysics and Geophysical Exploration
• /
• v.14 no.2
• /
• pp.158-163
• /
• 2011

The small-loop electromagnetic (EM) survey is an effective method to delineate contamination areas and pathways of contaminant plumes from landfill. A multi-frequency small-loop EM survey was applied to find them at landfill area, located in delta region, and checked the results with in-situ surveys including 24 trench excavations and 12 drilling boreholes. The correlation between these two results indicates this survey would be suitable to investigate the contamination area. However, it would be difficult to analyze low resistivity less than 10 ohm-m below 10 m depth in delta area without drilling survey because of a limitation to expand the penetration depth lower than 10 m depth due to the separation of 1.66 m between the two coils of GEM-2.

• Journal of Animal Environmental Science
• /
• v.16 no.1
• /
• pp.13-20
• /
• 2010

Manure compost is a main product from animal wastes in Korea. Solid manure is usually treated by aerobic composting at manure composting facilities for land reinforcement. Agricultural use of manure compost as organic fertilizer resources, mainly manure compost, is now recommended in Korea. This study investigated the evaluation of durability about the manure composting machinery and structures which was controlled by aeration and periodic agitating. The questionnaire addressed three main topics as follows: operating practices, machinery and maintenance of the manure composting facilities are being operated. A total of the 22 manure composting facilities in an agricultural cooperative were surveyed. The results obtained in this survey were summarized as follow: The major causes of manure composting apparatus trouble were corrosion and wear, overloading and foreign matter etc. The highly trouble frequency of the agitator, packer and conveyor were chain, agitating blade and shaft, motor and screw vane, respectively. These analytical results can be used as basic information to establish the maintenance control methods and durability standard of manure composting facility.

• Journal of Software Engineering Society
• /
• v.25 no.1
• /
• pp.11-18
• /
• 2012

Characteristic of decommissioning target facility investigate and understand is very important. because radioactive materials occurs in the decommissioning and dismantling, so it is difficult to use a general dismantling method. Decommissioning nuclear facilities, the characteristics of the target of research to predict the amount of decommissioning waste, decommission projects costing is largely utilized. For this purpose, we developed DEFACS(Decommissioning Facility Characterization DB System) that manage characteristic of decommissioning target facility. But nuclear facility decommissioning takes long time. so we inevitably developed system during decommissioning works, it occurs many system changes. For this reason, it is difficult to apply general development process, so we take CBD process that divide CD(Component Development) and CBSD(Component Based Software Development) for handling change of requirement. it make Component of the overall system for changes to minimize changes by strengthening the independence of components and processes due to changes in requirements were to minimize stopping of the process.