• Journal of the Korean Institute of Rural Architecture
• /
• v.18 no.4
• /
• pp.17-24
• /
• 2016

Since the users have direct access to search and browse freely, the open access system has been employed to all the usual modern libraries. However, library space shortage problem created by the continuously increasing printed materials caused the degradation of usability and quality of the library space. Open Access system is superior in user convenience but is inferior in space efficiency. Keeping the open access system is considered as one of the reasons of the space shortage problem. Even though the closed access system does not provide free access or easy browsing for the uses, it's space efficiency is much higher than the open access system. The closed access system should be employed as a plan to relieve space shortage problem. Since the closed access system does not allow the public direct access to books, it is very economical. It also provides much better space efficiency with higher book shelving density. In this article, closed access library system models and their characteristics are examined as the reduction plans for the library space shortage problems.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.155-161
• /
• 2012

A dynamic biofilter model was suggested to integrate the effect of biofilter-medium adsorption capacity on the removal efficiency of volatile organic compound (VOC) contained in waste air. In particular, the suggested biofilter model is composed of four components such as biofilm, gas phase, sorption volume and adsorption phase and is capable of predicting the unsteady behavior of biofilter-operation. The process-lumping model previously suggested was limited in the application for the treatment of waste air since it was derived under the assumption that the adsorbed amount of VOC equilibrated with biofilter-media would be proportional to the concentration of dissolved VOC in the sorption volume of biofilter-media. Therefore a Freundlich adsorption isotherm was integrated into a robust biofilter process-lumping model applicable to a wide range of VOC concentration. The values of model parameters related to biofilter-medium adsorption were obtained from the dynamic adsorption column experiments in the preceding article and literature survey. Furthermore a separate biofilter experiment was conducted to treat waste air containing ethanol and the experimental result was compared with the model predictions with various values of Thiele modulus (${\phi}$). The obtained value of Thiele modulus (${\phi}$) was close to 0.03.

• Resources Recycling
• /
• v.13 no.1
• /
• pp.39-46
• /
• 2004

Triboelectrostatic separation process is a technology that different particles charged after contact and rubbing different materials are separated in a high electric field. This technology has an advantage in that it can be used for separating non-conducting materials such as plastics unlike other electrostatic separation processes. There are two objectives in this study. One is to develop an effective continuous tribo-electrostatic separation process. The other is to apply the developed device for the separation of mixed plastics. Results show that almost all tested plastics reaches over 95% in yield and grade after separation.

• Journal of the Korean Institute of Gas
• /
• v.16 no.4
• /
• pp.52-58
• /
• 2012

Recently, waste gas incineration is increasing due to strong environmental regulatory system in Korea. These incinerating facilities are usually connected with the top of the storage tank through pipeline and incinerate off gas with the flame. Therefore, the flame originated from these facilities is likely to move back into pipeline and might cause an explosion of the storage tank. Accordingly, the purpose of this study is to suggest the preventive measures and the way to improve the safety of these incineration systems through the cause analysis of a major industrial accident occurred in a acrylic acid manufacturing process in Korea. As a result of the study, the preventive measures are suggested as follows. (1) Air or inert gas inflow facilities should be well designed to dilute flammable gases into air or inert gas sufficiently before the blower is restarted in order to prevent the explosion (2) It is needed for the detonation-type flame arresters to be installed on the top of the storage tanks. (3) In case of using the deflagration-type flame arresters, it is necessary to install a rupture disk before the arresters, or blow off the flame outside tanks by connecting the tank top and the incinerator with hood-type pipe. (4) TDR should be installed to be restarted automatically after the momentary power failure.

• Journal of Chest Surgery
• /
• v.29 no.5
• /
• pp.581-584
• /
• 1996

Reexpansion pulmonary edema is a rare complication of the treatment of lung collapse secondary to pneumothordx, pleural effusion, or atelectasis but occasionally life threatening. Generally, reexpansion pulmonary edema is believed to o cur only when a chronically collapsed lung is rapidly reexpanded by evacuation or large amounts of air or fluid. This complication is heralded by tachypnea, unilateral rales, and profuse expectoration of frothy secretion within several hours of reexpansion. Increased dur- ation of pneumothorax and the use o( suction are important factors in the generation of reexpansion pulmonary edema. We had experienced 3 cases of reexpansion pulmonary edema. In the two cases the pneumothorax had been present for several days, and, after insertion of a chest tube, pulmonary edema developed unilaterally but improved with supplemental oxygen. In the third case, massive pleural effusion was present. and, after insertion of a chest tube, pulmonary edema developed unilaterally, followed by cardiac arrest. He died of pulmonary edema inspire of resuscitation.

• Membrane Journal
• /
• v.5 no.1
• /
• pp.35-43
• /
• 1995

For several years lots of attempts have been made to establish the liquid membrane-based techniques for separations of gas mixtures especially containing carbon dioxide. A more effective system to separate $CO_{2}$ from flue gases, a circulatory hollow-fiber membrane absorber(HFMA) consisting of absorption and desorption modules with vacuum mode, has been considered in this study. Gas-liquid mass transfer has been modeled on a membrane module with non-wetted hollow-fibers in the laminar flow regime. The influence of an absorbent flow rate on the separation performance of the circulatory HFMA can be predicted quantitatively by obtaining the $CO_{2}$ concentration profile in a tube side. The system of $CO_{2}/N_{2}$ binary gas mixture has been studied using pure water as an(inert) absorbent. As the absorbent flow rate is increased, the permeation flux(i.e., defined as permeation rate/membrane contact area) also increases. The enhanced selectivity compared to the previous results, on the other hand, shows the decreasing behavior. It has been found obviously that the permeation flux depends on the variations of pressure in gas phase of desorption module. From an accurate comparison with the results of conventional flat sheet membrane module, the advantageous permeability of this circulatory HFMA can be clearly ascertained as expected. Our efforts to the theoretical model will provide the basic analysis on the circulatory HFMA technique for a better design and process.

• Journal of Chest Surgery
• /
• v.30 no.4
• /
• pp.396-401
• /
• 1997

Tailoring thoracoplasty is employed prior to, following, or concomitant with pulmonary resection when it is anticipated that insufHclent lung tissue will remain to fill the pleural space following a pulmonary resection. This study reviewed a series of eight patients treated with tailoring thoracoplasty between 1990 and 1995. Indications were to close a persistent space In four patients and to tailor the thoracic cavity to accept diminished lung volume concomitant with a pulmonary resection in the other four patients. The primary underlying disease was lung cancer in three patients and pulmonary tuberculosis In five patients, two of whom had concomitant aspcrgilloma, two, pneumothora , and one, empyema with bronchopleural fistula. In four patients with a prior pulmonary resection, the tailoring thoracoplasty was performed within eight days after the resection surgery. There was no failure to accommodate the thoracic cavity to insufficient lung tissue, even though two patients needed a second thoracoplasty. We conclude that tailoring thoracoplasty may be performed to close anticipated persistent pleural space and to accommodate diminished lung volume with acceptable cosmetic results Early, after, or concomitant with pulmonary resection in selected patients.

• Korean Journal of Veterinary Research
• /
• v.32 no.4
• /
• pp.605-608
• /
• 1992

This paper dealt with the clinical and pathological observations on the experimental rabbit viral hepatitis. Rabbits with 2-14 months of ages were intramuscularly inoculated with virus suspension. The results were summarized as follows. Ninety percents of experimental rabbits inoculated with virus died within 96 hours postinoculation. Common clinical signs were inappetence, increase in body temperature, depression, mild diarrhea and in three cases, bloody foam from nostrils was recognized. At necropsy, in most of the experimental cases, there were hyperemia or haemorrhages in many organs and pale liver. Intestinal catarrh and retention of turbid urine in urinary bladder were seen in some cases. Histopathologically, liver necrosis was found in all the cases died of this disease. However, there was a difference in the severity of hepatic necrosis. Haemorrhages were Iecognized in lungs, heart, liver, spleen, kidneys and thymus, in order. Liver necrosis was marked even in the cases with no haemorrhage. Perivascular cuffing in brain and catarrhal enteritis in small intestine were seen in many cases. From these results, consistent and primary lesion in this viral disease is hepatitis in susceptible rabbits. It was concluded that rabbit hepatitis virus might have the properties of hepatotropism and consequently induce peripheral necrosis in the liver leading to acute viremia with haemorrhages.

• Journal of Chest Surgery
• /
• v.30 no.12
• /
• pp.1225-1231
• /
• 1997

Spontaneous pneumothorax is the sudden collapse of a lung usually caused by air leakage from a subvisceral pleural blob. Responses to closed thoracostomy,thoracentesls and simple observation are usually prompt and effective. But in some cases, these are unsucceful and open thoracotomy is indicated. A clinical evaluation was performed on 242 cases(236 patients) of open thoracotomy in spontaneous pneumoth rax who were admitted and treated at department of Thoracic and Cardiovascular Surgery. Masan Samsung General Hospital during the past 9 years from January 1988 to December 1996. The results were as follows 1. The sex ratio was male predominance(M:F=11.7:1) 2. The most common age group were 2nd, 3rd decades(2nd=29.3%, 3rd=30.2%). 3. The most common chief complaints were chest pain and dyspnea(chest pain=41.7%. dryspnea= 36.8). 4. The etiologic factors of spontaneous pneumothorax were primary spontaneous pneumothorax(86.4%), tuberculosis(9.1%), COPD(3.7%) and pleuritis(0.8%). 5. The site of spontaneous pneumothorax was 52.1% in right, 45.4% in left and 2.5% in both. 6. The common indications of open thoracotomy were recurrence(44.2%), persistent air leakage(31.8%) and inadequate expansion(15.7%). 7. The operative procedures were bullectomy or mechanical pleurodesis through posterolateral thoracotomy or median sternotomy. 8. The most frequent location of bulla or blob were apical segme t oi RUL(35.1%) and apicoposterior segment of LUL(41.3 %). 9. The number of bulla or blob were mainly 1 to 5(88%), and there were no significant differences among operation indications. 10. The size of bulla or bleb were mainly below 5cm(81%)and small bulla($\leq$1cm) were predominant in recurrence group but large bulla(>5cm)were predominant in persistent air leakage and inadequate expansion group. 11. The pleural adhesion was seen in 54.5%.(Recurrence group 64.1%,Persistent air leakage group 51.9%,Inadequate expansion group 47.4%).

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.6
• /
• pp.936-944
• /
• 1996

Background: Neutrophils or monocytes separated in vitro by the adherence to plastic surface are known to be activated by surface adherence itself and subsequent experimental data might be altered by surface adherence. Adhesion molecules and gene transcription of the inflammatory mediators are known to be associated in this process. To evaluate whether adhesion molecule and transcriptional activation of the inflammatory substances are also involved in the activation of human alveolar macrophage by the adherence procedure, we designed this experiment. Method : Bronchoalveolar lavage was performed in the person whose lung of either side was confirmed to be nonnal by chest cr and alveolar macrophage was harvested. To measure the expression of Interleukin-8(IL-8) mRNA, manganese superoxide dismutase(SOD) mRNA and CD11/CD18 mRNA in human alveolar macrophage of both adherence state and suspension state, Northern blot analysis was done at 0, 2, 4, 8 and 24hrs after the adherence to plastic surface and during suspension state. Then, phorbol myristate acetate(pMA) and N-formyl-methionyl-leucyl-phenylalanine(fMLP) were added respectively in the same experimental condition. Result : 1) Human alveolar macrophages in the adherent state induced IL-8 mRNA and SOD mRNA expression which was maximal at 8 hours after the adherence to plastic surface. But we could not observe the upregulation of CD18 mRNA by surface adherence. 2) PMA induced these mRNA expression both in the adherent cell and the nonadherem cells, but the induction of mRNA expression by fMLP occurred only in the adherent cells. Conclusion: These results suggest that adherence of huamn alveolar macropahge is an important cell-activating event that may play a critical role in the modulation of lung inflammatory respones.